Download Epson SCI 7661 Series Specifications

Transcript
Appendix
EMBOSS CARRIER TAPING STANDARD (14-PIN SOP5)
TAPING INFORMATION
The emboss carrier taping standard is shown in the
following table and figure. This standard conforms to
Dimension code
the EIAJ RCI009B electronic parts taping specification.
Each tape holds 2,000 devices.
Dimensions (mm/°)
Dimension code
A
8.4
P2
2.0 ±0.1
B
10.6
T
0.3 ±0.05
D0
1.55 ±0.05
T2
3.0
D1
1.55 ±0.05
W
16.0 ±0.3
E
1.75 ±0.1
W1
13.5
F
7.5 ±0.1
P1
12 ±0.1
P0
4.0 ±0.1
Dimensions (mm/°)
Note
The tape thickness is 0.1 mm max.
P0
DIA D0
P2
T
E
F
A
W
B
W1
DIA D1
Appendix
P1
T2
There are no joints in either the cover or carrier tapes.
Less than 0.1% of the total device count is comprised
of non-sequential blanks. There are no sequential
SCI7000 Series
Technical Manual
blanks. This does not apply to the tape leader and
trailer.
EPSON
6–13