Download Epson SCI 7661 Series Specifications
Transcript
Appendix EMBOSS CARRIER TAPING STANDARD (14-PIN SOP5) TAPING INFORMATION The emboss carrier taping standard is shown in the following table and figure. This standard conforms to Dimension code the EIAJ RCI009B electronic parts taping specification. Each tape holds 2,000 devices. Dimensions (mm/°) Dimension code A 8.4 P2 2.0 ±0.1 B 10.6 T 0.3 ±0.05 D0 1.55 ±0.05 T2 3.0 D1 1.55 ±0.05 W 16.0 ±0.3 E 1.75 ±0.1 W1 13.5 F 7.5 ±0.1 P1 12 ±0.1 P0 4.0 ±0.1 Dimensions (mm/°) Note The tape thickness is 0.1 mm max. P0 DIA D0 P2 T E F A W B W1 DIA D1 Appendix P1 T2 There are no joints in either the cover or carrier tapes. Less than 0.1% of the total device count is comprised of non-sequential blanks. There are no sequential SCI7000 Series Technical Manual blanks. This does not apply to the tape leader and trailer. EPSON 6–13