Download AudioControl Matrix Plus Specifications

Broadcast Tools® ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher
“Open Collector” Status Outputs, 8 Port Output Control
The ACS 8.2 Plus provides eight open collector status outputs. The status outputs
may be configured to operate in one of three modes:
• The status output follows the associated channel (multiplex applications).
• The status outputs a one-second pulse when the associated channel is selected.
• Software Control.
Relay Outputs, 8 Port Output Control:
The ACS 8.2 Plus contains 8 - SPDT relays. Each relay may be latched on, latched
off or momentarily turned on by a non-dedicated computer. The “pulse” time may
be set from 100msec to 9.9 seconds. The default pulse length is one-second.
8 SPDT relay outputs may be controlled by software. Each relay may be commanded to:
Latch On
Latch Off
Momentary On
Turns on and stays on (through power
failures) until turned off.
Turns off and stays off (through power
failures) until turned on.
Overrides latch; turns on for (default)
second, then latches off.
Multiplex “MPX” NON-software control. SW17-9 must be ON. Each relay follows the associated input channel selected to output two only.
WEBSITE:
Visit our web site for
product updates and
additional information.
DESCRIPTION
e-mail: [email protected] voice: 360.854.9559 fax: 866.783.1742
7