Download Comdial ExecuTech 0816 Series Specifications

.
Introduction
IMI-66-031
d
lgSSLvuithanskseLw
Each station comes equipped with a built-in direct station select
intercom for stations 12 through 25. Access to these stations is
effected by pressing the intercom select key and then pressing one of
the memory keys. This action completes a voice announced intercom
call to the selected station.
Any active outside line is
automatically placed on hold when the intercom select key is pressed.
When custom calling features are available via a .flash" signal, the
system can be programmed so that the RECALL key will generate a
"flash" signal when it is pressed. When custom calling features are
not available, the system can be programmed to allow the RECALL key to
act as a positive disconnect or dial tone recall key. These two
features are mutually exclusive. The system can be programmed to
provide only one of these features at a time.
Flexible ringing assignments are programmable on a per line/per
station basis. The system can be configured to provide direct ringing
for every line at every station; direct ringing for prime line with
delayed ringing for all other lines; and prime line ringing only.
Ringing can be disabled for each line on an individual basis at each
station. Subdued ringing is automatically provided to any station
that is busy on an outside line.
The station handset is compatible with magnetically-coupled
aids.
hearing
The light associated with the line select keys provide a visual
indication of the in-use and hold status of each line available for
use at a particular station.
Refer to the discussion titled, a
a
B&S
&JJJ&JJ~
J&J&-~,
’