Download COMPRO V600 - START UP GUIDE Specifications

4-07-2008
12:02
Pagina 115
With gearshift to CITY gears can still be
shifted manually using the gearshift lever or
the steering wheel controls. Geashift stays
in CITY.
The gear engaged (fig. 129) is shown
on the display regardless of the mode selected.
In the CITY mode the selected position is
shown.
A warning light connected with the corresponding failure message (“GEARBOX FAILURE”) (fig. 130) and a buzzer attract the
attention of the driver in the event of a fault
of the Selespeed transmission.
N = neutral;
1 = first gear;
2 = second gear;
IMPORTANT Opening the driver’s door
the Selespeed starts the hydraulic part of
the system to prepare it for when the engine is started.
Turning the ignition key to MAR, all the
segments of the gear display (fig. 129),
the gearbox failure warning light (fig.
130) and the word CITY light up. After
about one second, the display indicates the
gear engaged (N, 1, 2, 3, 4, 5, R).
IMPORTANT If after 10 seconds the display segments do not display the gear engaged or the failure warning light stays on,
turn the ignition key to STOP and wait for
the display to go off, then repeat the system activation procedure. If the fault presists, contact Alfa Romeo Authorised Services.
3 = third gear;
4 = fourth gear;
5 = fifth gear;
R = reverse.
A0A9017g
fig. 129
SYSTEM ACTIVATION
GETTING TO KNOW YOUR CAR
110-185_Alfa147 Q2 GB
A0A9118g
fig. 130
115