Download System Design Guide - Bogen Catalog 104

Transcript
SYSTEM DESIGN GUIDE
Speaker Layout
The layout of the speakers should be planned before installation begins.The spacing of the speakers can be adjusted so that
the speakers are evenly spaced in a row. Some adjustments may need to be made due to sound obstructions that may be in
the area such as high shelving, cubicle walls, etc.
Ceiling Speakers
Ceiling Speaker Layout
Layout starts in one corner of the area.The first speaker should
be positioned from each wall a distance approximately equal to
the ceiling height of the room (dimension A).
TOP-DOWN VIEW
START
The next speaker in row 1 should be spaced a distance approximately equal to twice the height of the ceiling (dimension B). Each
additional speaker in the row should use this same spacing.
Row 2 starts at twice the ceiling height distance (B) from row 1
and twice the ceiling height (B) from the wall.The other speakers
in this row are also spaced at twice the ceiling height.
Row 3 is again spaced at twice the ceiling height (B) from the previous row.The first speaker starting this row is positioned at one
ceiling height distance (A) from the wall (similar to row 1).
Continue this pattern of alternating rows until the room is covered.
The spacing of the speakers can be adjusted so that the speakers
are evenly spaced in a row and are more aesthetically pleasing.
Horn Speaker Layout
Horn Loudspeakers
TOP-DOWN VIEW
For areas that include high shelving or corridors, speakers should
be installed so that they project down the aisles between the
shelves or down through the corridors.
D = See charts below
START
Row 1
D
1/2 C
HORN SPEAKER
Row 2
C
Row 3
Row 4
NOTE: Each environment is unique.This layout plan is general in
nature and may not be applicable for every installation.
Volume Setting
Ambient
Noise Range
Low Noise
(55 dB-65 dB)
115 ft.
70 ft.
LOW
Low Noise
(55 dB-65 dB)
120 ft. 80 ft.
1/2 Rotation
Medium Noise
(65 dB-75 dB)
107 ft.
65 ft.
HIGH
Medium Noise
(65 dB-75 dB)
100 ft. 60 ft.
Full Clockwise
Medium Noise
(75 dB-85 dB)
107 ft.
65 ft.
LOW
High Noise
(75 dB-85 dB)
100 ft. 60 ft.
1/2 Rotation
High Noise
(75 dB-85 dB)
100 ft.
65 ft.
MEDIUM
Very High Noise
(85 dB-95 dB)
65 ft.
40 ft.
Full Clockwise
Very High Noise
(85 dB-95 dB)
90 ft.
55 ft.
Full Clockwise
65 ft.
40 ft.
HIGH
HS15EZ
HS30EZ
Very High Noise
(85 dB-95 dB)
C
D
Volume Setting
SPT15A
D
SPT30A
C
HS7EZ
Ambient
Noise Range
SPT5A
The spacing of the speakers can be adjusted so that the speakers
are evenly spaced in a row.
SAH15A, AH15A
70
C = See charts below
Begin in one corner of the area.The first speaker in Row 1 is positioned a distance equivalent to (1/2C).The next speaker in Row 1
should be a distance equivalent to (C) from the first speaker. Each
additional speaker in the row should use this same spacing. Row 2
starts at the indicated distance (D) from the wall. Using the diagram
as a guide, fill in the remaining rows in this same alternating
pattern until the entire area is appropriately covered.
SAH5A, AH5A
www.bogen.com
Desired mounting height, barring obstructions, is 15 to 20 feet,
with the speakers angled downward toward the listening area and
facing in the same direction. Follow the diagram for the layout of
the horn speakers while using the charts below to define the lettered dimensions for each specific speaker.
Ambient
Noise Range
Speaker
Power Taps
(Watts)
Low Noise
(55 dB-65 dB)
1.25W
100 ft. 65 ft.
Medium Noise
(65 dB-75 dB)
7.5W
100 ft. 65 ft.
Medium Noise
(65 dB-75 dB)
0.9W
105 ft. 67 ft.
High Noise
(75 dB-85 dB)
3.8W
100 ft. 65 ft.
Very High Noise
(85 dB-95 dB)
15W
63 ft.
High Noise
(75 dB-85 dB)
3.8W
103 ft. 68 ft.
Very High Noise
(85 dB-95 dB)
30W
97 ft.
C
D
40 ft.
57 ft.