Download Samsung LW15E33C Specifications

BN68-00438E-02Cover
8/18/03 6:20 PM
Page 1
LCD TV
LCD TV
- AFTER SALES SERVICE
LW15E33C
LW17E34C
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ELECTRONICS
LW15E33C/LW17E34C
BN68-00438E-02
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-00438D-02_en
6/11/03 7:11 PM
Page 1
LCD TV
LW15E33C
LW17E34C
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-00438D-03eng
8/18/03 11:11 AM
Page 2
Caution
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash and arrow head
within the triangle is a warning
sign alerting you of “dangerous
voltage” inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
☛ The main voltage is indicated on the rear of your set and the frequency is 50 or 60 Hz.
Information in this document is subject to change without notice.
© 2003 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.; Microsoft, Windows® and Windows® NT are
registered trademark of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard
Association. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.
TRADEMARK & LABEL LICENSE NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
European Notice (Europe Only)
Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms:
■ EN55022:1998+A1:2000 - Radio Frequency Interference
■ EN55024:1998 - Electromagnetic Immunity
■ EN55013:1990+A12:1994+A13:1996+A14:1999 - Radio Frequency Interference
■ EN55020:1994+A11:1996+A12/A13/A14:1999 - Electromagnetic Immunity
■ EN61000-3-2:1995+A1/A2:1998 - Power Line Harmonics
■ EN61000-3-3:1995 - Voltage Fluctuations
■ EN60065:1997 or EN60095:1998 - Product Safety
English-2
BN68-00438D-02_en
6/11/03 7:11 PM
Page 3
Safety Instructions
These illustrations represent precautions concerning your set.
Do NOT expose your set to extreme
temperature or humidity conditions.
Do NOT expose your set to
direct sunlight.
Do NOT expose your set to any liquids.
If your set is broken,
do not try to repair it yourself.
Contact qualified service personnel.
During storm conditions (especially when
there is lightning) unplug your set from
the mains socket and aerial.
Keep all power adaptors apart.
Possible fire hazard.
Always keep the power adaptor in a
well-ventilated area.
Remove and discard the plastic
cover from the power adaptor before use.
Possible fire hazard.
Keep the power adaptor away from
any other heater. Possible fire hazard.
If the remote control is not used for a long
period of time, remove the batteries and
store it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
English-3
BN68-00438D-02_en
6/11/03 7:11 PM
Page 4
Contents
◆ FOREWORD
■
■
Caution ..........................................................................................................
Safety Instructions ..........................................................................................
2
3
◆ CONNECTING AND PREPARING YOUR TV
■
■
■
■
■
■
■
■
■
■
Viewing the Control Panel .............................................................................
Viewing the Connection Panel .......................................................................
- Connecting an Aerial or Cable Television Network ....................................
- Connecting Set-Top Box, VCR, or DVD......................................................
- Connecting Computer ...............................................................................
- Connecting External A/V Devices ...............................................................
- Kensington Slot ...........................................................................................
Viewing Pictures From External Sources.........................................................
Inserting the Batteries in the Remote Control..................................................
Viewing the Remote Control (All Functions Except Teletext) ..........................
Viewing the Remote Control (Teletext Functions)...........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ...............................................................................
Becoming Familiar with the Remote Control..................................................
Choosing Your Language................................................................................
6
7
8
8
8
9
9
10
11
12
13
14
14
15
16
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically......................................................................
Storing Channels Manually.............................................................................
Giving Channels Names.................................................................................
Skipping Unwanted Channels ........................................................................
Fine Tuning Channel Reception .....................................................................
Sorting the Stored Channels ...........................................................................
17
18
19
20
20
21
◆ USING THE VARIOUS FUNCTIONS
■
■
■
■
English-4
Changing the Picture Standard .......................................................................
Adjusting the Picture Settings .........................................................................
Selecting the Picture Format...........................................................................
Freezing the Current Picture...........................................................................
22
22
23
23
BN68-00438D-02_en
6/11/03 7:11 PM
Page 5
Contents
◆ USING THE VARIOUS FUNCTIONS
■
■
■
■
■
■
■
Changing the Sound Standard ........................................................................
Adjusting the Sound Settings ..........................................................................
Enjoying the Dolby Sound..............................................................................
Selecting the Sound Mode..............................................................................
Viewing the Picture In Picture (PIP)................................................................
Switching Off Automatically...........................................................................
Displaying Information...................................................................................
24
24
25
25
26
27
27
◆ USING THE PC FUNCTIONS
■
■
■
■
■
■
■
Setting up Your PC Softerware (Based on Windows 2000) .............................
Adjusting the Brightness and Contrast ............................................................
Adjusting the Image Quality...........................................................................
Changing the Image Position..........................................................................
Adjusting the Color ........................................................................................
Initializing the Image Settings.........................................................................
Adjusting the PC Screen Automatically ..........................................................
28
29
30
31
32
33
33
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature..............................................................................................
Displaying the Teletext Information................................................................
Selecting a Page by Number ..........................................................................
Using FLOF to Select a Page ..........................................................................
Storing Teletext Pages.....................................................................................
34
35
36
37
37
◆ RECOMMENDATIONS FOR USE
■
■
■
■
■
■
■
■
Troubleshooting: Before Contacting Service Personnel...................................
Power Saver ...................................................................................................
Technical and Environmental Specifications ..................................................
Display Modes ...............................................................................................
Maintenance of Your Telelvision....................................................................
How to assemble the TV set and stand base...................................................
Installing the Wall Mount Kit..........................................................................
Wiring the Mains Power Supply Plug (UK Only) ............................................
Symbols
Press
☛
➢
Important
Note
38
39
40
41
42
43
44
46
English-5
BN68-00438D-02_en
6/11/03 7:11 PM
Page 6
Viewing the Control Panel
TV/VIDEO
Displays a menu of all of the available input sources
(TV - Video1 - Video2 - S-Video - PC).
MENU
Opens the on-screen menu.
-
+
Moves the selector left or right on the OSD.
Increases or decreases the level of audio
volume and the values of the selected function.
Moves the selector up or down on the OSD.
Increases or decreases the channel number.
English-6
POWER
Turns ON/OFF your set.
SPEAKER
Power Indicator
Lights up when you turn the power off.
REMOTE CONTROL SENSOR
BN68-00438D-02_en
6/11/03 7:11 PM
Page 7
Viewing the Connection Panel
Option
Power Input
☛
Whenever you connect an audio or video system to your set,
ensure that all elements are switched off. Refer to the
documentation supplied with your equipment for detailed
connection instructions and associated safety precautions.
English-7
BN68-00438D-02_en
6/11/03 7:11 PM
Page 8
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Set-Top Box, VCR, or DVD
- Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to “Audio (ST)” on the rear of your set and the other end to “Audio Out” of
the sound card on your computer.
- If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to
the driver installation instructions included with your CD package.
➣
15 Pin D-SUB connector
English-8
Pin
Separate H/V
Composite H/V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Date)
Horizontal Sync.
Vertical Sync.
DDC - SCL (Clock)
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Date)
Horizontal/Vertical Sync.
Not used
DDC - SCL (Clock)
BN68-00438D-02_en
6/11/03 7:11 PM
Page 9
Viewing the Connection Panel
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD, or Camcorder.
- Connect RCA audio cables to “AUDIO (L)” and “AUDIO (R)” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (Ø) on the rear of your set.
While the headphone is connected, the sound from the built-in speakers will be disabled.
Kensington Slot
- This television has been designed to apply a burglarproof lock.
➢
Retractable Stand
Tilt the screen until you feel comfortable.
The maximum tilt angle is 10 degree to the backward direction.
Please do not tilt the television other than specified range.
Excessive force to tilt the television other than specified
range may give permanent damage to the mechanical
part of the stand.
English-9
BN68-00438D-02_en
6/11/03 7:11 PM
Page 10
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate
input.
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
1
Check that all the necessary connections have been made
(refer to pages 8 and 9 for further details).
2
Switch your set on and if necessary, press the TV/VIDEO button
repeatedly.
The input sources are displayed in the following order:
TV - VIDEO1 - VIDEO2 - S-VIDEO - PC.
MUTE
EXIT
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
English-10
BN68-00438D-02_en
6/11/03 7:11 PM
Page 11
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
◆ Purchase your set
◆ Find that the remote control is no longer operating correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care
to respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
➣
Do not mix battery types, i.e. alkaline and manganese.
English-11
BN68-00438D-02_en
6/11/03 7:11 PM
Page 12
Viewing the Remote Control (All Functions Except Teletext)
Select to the PC mode directly
Power
Television On/Off
TV/VIDEO
PC
DISPLAY
STILL
Available sources selection
Display the setting information
Picture freeze
P.STD
S.STD
Picture effect selection
Sound effect selection
Next channel
Menu display and
change confirmation
P
MENU
Volume decrease
Volume increase
P
Previous channel
MUTE
EXIT
Temporary sound switch-off
Numeric buttons for
direct channel access
Exit from the OSD/
Picture-In-Picture Off
1
2
3
4
5
6
7
8
9
PRE-CH
-/--
One/Two-digit channel selection
Previous channel
0
TTX/MIX
Sound mode selection
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
Self-adjust to the incoming
video signal
Automatic switch-off
Picture size selection
ON
Picture-In-Picture On/
PIP source selection
PIP location selection
PIP size selection
➣
English-12
The performance of the remote control may be affected by bright light.
BN68-00438D-02_en
6/11/03 7:11 PM
Page 13
Viewing the Remote Control (Teletext Functions)
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
Teletext next page
Programme selection by name
P
MENU
P
Teletext previous page
MUTE
EXIT
Exit from the Teletext display
1
2
3
4
5
6
7
8
9
PRE-CH
-/-0
Teletext display/
mix both teletext information
and the normal broadcast
Teletext hold
Teletext reveal
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
Teletext store
Teletext size selection
CANCEL
Teletext mode selection
(List or Flof)
Teletext cancel
ON
Teletext sub-page
Fastext topic selection
English-13
BN68-00438D-02_en
6/11/03 7:11 PM
Page 14
Switching On and Off
The mains lead is attached to the rear of your set.
☛
Power
TV/VIDEO
PC
DISPLAY
P.STD
If you have purchased this set in the United Kingdom,
refer to page 42 for further instructions on plug wiring.
STILL
S.STD
1
Plug the mains lead into an appropriate socket.
Result:
MUTE
A Standby indicator lights off on the front panel.
2
Press the Power (
3
To switch off, press the Power (
) button to switch on.
) button again.
EXIT
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
Placing in Standby Mode
ON
Your set can be placed in Standby mode, in order to reduce the
power consumption.
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
S.STD
1
Press the Power (
2
To switch back on, simply press the Power (
or a numeric button.
➣
MUTE
EXIT
PRE-CH
-/--
TTX/MIX
SLEEP
P.SIZE
AUTO
DUAL I/II LIST/FLOF
English-14
CANCEL
SUBPAGE
PIP
SIZE
LOCATE
ON
) button.
) button again
Do not leave your set in Standby mode for long periods of
time (when you are away on holiday, for example).
Turn off by pressing the ( ) button. It is best to unplug the
set from the mains and aerial.
BN68-00438D-02_en
6/11/03 7:11 PM
Page 15
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up your set using the on-screen menu system
Power
The following table presents the most frequently used buttons and
their functions.
Power PC
TV/VIDEO
P.STD
TV/VIDEO
DISPLAY
STILL
S.STD
▲
P
Power
P
▼
MUTE
EXIT
EXIT
TV/VIDEO
PRE-CH
PRE-CH
9
-/--
SLEEP
P.SIZE
STILL
S.STD
Menu Function
Used to display the next
stored channel.
Used to select the previous
menu option.
Used to display the
previous stored channel.
Used to select the next menu
option.
PC
DISPLAY
STILL
Used to switch repeatedly between the last two channels
displayed. (PRE-CH; Previous Channel)
P
MENU
P
MUTE
EXIT
1
2
3
Used to display the corresponding channels.
4
5
6
7
8
PRE-CH
AUTO
TTX/MIX DUAL I/II LIST/FLOF
SLEEP
PC
DISPLAY
S.STD
to
0
/VIDEO
Viewing Function
P.STD
-/-TTX/MIX
Power
PC
P.STD
Button
-/--
TV/VIDEO
DISPLAY S.STD
STILL
PC
P.STD
MUTE
Power
AUTO
CANCEL
SUBPAGE
DUAL I/II LIST/FLOF PIP
CANCEL
DISPLAY
STILL
ON
SUBPAGELOCATE
SIZE
PIP
P.SIZE
ON
LOCATE
SIZE
P.STD
S.STD
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to decrease the
volume.
Used to...
◆ Display a submenu containing
selections for the current
menu option.
Power Power ◆ Search forwards manually
for channels
◆ Reduce a menu option value.
EXIT
TV/VIDEO TV/VIDEO
PC
Used to increase the
volume.
P.STD
EXIT
Used to switch the sound off temporarily.
-/--
➣
SLEEP
EXIT
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
DUAL I/II LIST/FLOF
STILL
Used to return to the previous
menu or normal viewing.
CANCEL
MUTE
MUTEsystem and return
EXITto normal
EXIT
Used to exit from
the menu
viewing directly.
SUBPAGE
PIP
ON
TX/MIX
AUTO
LEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
LOCATE
CANCEL
PIP
ON
SIZE
SIZE
-/--
-/--
PRE-CH
PRE-CH
AUTO
AUTO
LOCATE
TTX/MIX
TTX/MIX
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
ON
CANCEL
PIP
ON
CANCEL
ON
To turn PRE-CH
the sound back on, press this button again, or
press the
- or
+ button.
Used to displayAUTO
the
on-screen menu system.
PRE-CH
P.SIZE
-/--
DISPLAY
PC
DISPLAY
STILL
AUTO
Used to...
◆ Display a submenu containing
selectionsS.STD
for the current
P.STD
S.STD
menu option.
◆ Search backwards manually
for channels
◆ Increase a menu option value.
MUTE
TTX/MIX
MENU
0
TTX/MIX
MUTE
MUTE
9
PRE-CH
-/--
English-15
BN68-00438D-02_en
6/11/03 7:11 PM
Page 16
Choosing Your Language
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
Power
Power
When you start using your set for the first time, you must select the
language which
will be
used
displaying
menusSTILL
and indications.
TV/VIDEO
TV/VIDEO
PC for
DISPLAY
PC
DISPLAY
STILL
Power
P
1
MENU
Press theP.STD
MENU P.STD
button.
S.STD
Power
S.STD
PC
The main menu is displayed. TV/VIDEO TV/VIDEO
Result:
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
EXIT
EXIT
P
2
MUTE
EXIT
Result:
The options available in the Function group are
displayed.
3
Press the
Off
4
Press the P▼ or P▲ button to select the Language.
Normal
PRE-CH
English
5
Select a particular language by pressing the
- or
repeatedly.
MUTE
MUTE
EXIT
EXIT
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
Function
Sleep timer
PIP
Size
-/-Language
Press the P▼ or P▲ button to select the Function.
P.STD
P.STD
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
- or
+ button.
MUTE
ON
-/--
TTX/MIX
SLEEP
-/--
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
PIP
SUBPAGE SUBPAGE
ON
SIZE
SIZE
LOCATE
MUTE
-/--
PRE-CH
TTX/MIX
AUTO
AUTO
PIP
SLEEP
ON
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
LOCATE
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
English-16
PRE-CH
CANCEL
TTX/MIX
P.SIZE
+ button
PIP
ON
ON
SIZE
LOCATE
LOCATE
BN68-00438D-02_en
6/11/03 7:11 PM
Page 17
Storing Channels Automatically
You can scan for the frequency ranges available to you
Power
Power
(and availability
depends
on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers.
However
you
can
sort numbers
manually and
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
PoweryouPower
clear any channels
do not wish to watch.
P.STD
1
Result:
P.STD
S.STD
S.STD
TV/VIDEO TV/VIDEO
PC
Channel
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
The options available in the Channel group are displayed.
Press the
Power - or
Power + button. P.STD
Result:
4
S.STD
STILL
Press the P▼ or P▲ button to select the Channel.
Result:
3
S.STD
Power Power
The main menu is displayed.
P.STD
2
P.STD
TV/VIDEO
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Press the
MENU
button.
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
P.STD
TV/VIDEO TV/VIDEO
PC
- or
DISPLAY
PC
DISPLAY
STILL
+ button again.
STILL
Result: MUTEThe options
store group are
MUTE available in the
EXITAuto EXIT
P.STDdisplayed
P.STD with the Country
S.STD
S.STD
is selected.
Channel
Country
Search
5
Select your country by pressing the
- or
+ button repeatedly.
MUTE countries
MUTE are available:EXIT
EXIT
The following
Belgie - Deutschland - Espania - France - Italia - Nederland
- Schweiz - Sverige - UK - East Europe.
6
Press the P▼ or P▲ button to select
the Search,
MUTE
MUTE and then
press the
- or
+ button.
EXIT
Search
Program
Frequency
Band
The search will end automatically. Channels are sorted
PRE-CHreflects
PRE-CH
-/--and stored
-/-- in an order which
their position in the
7
MUTE
TTX/MIX
MUTE
TTX/MIX
EXIT
AUTO
UK
EXIT
frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
➣
UK
The Auto store is selected.
Press the
Result:
Country
Search
P1
43MHz
VHF-L
EXIT
AUTO
PRE-CH
PRE-CH
-/-- the search
-/-To stop
before it has
finished,
press the EXIT button.
When the
channels
have
beenI/IIstored,
you can:
SLEEP
DUAL
SLEEP
I/II LIST/FLOF
DUAL
LIST/FLOF
CANCEL
CANCEL
TTX/MIXchannels
TTX/MIX
AUTO
AUTO
◆ Change
◆ Assign a name to the stored channels
(refer
-/--/-- to page 19) PRE-CH
P.SIZE
P.SIZE
PIP
◆ Clear
a channel
(referSUBPAGE
to pageSUBPAGE
20)PIP
DUAL
SLEEPI/IIreception
LIST/FLOF
DUAL I/II ifLIST/FLOF
CANCEL CANCEL
◆ FineSLEEP
tune channel
necessary
(refer
ON
ON to page 20)
◆ Sort them in the order required
(refer to page 21)
TTX/MIX TTX/MIX
AUTO
P.SIZE
P.SIZE
-/--
-/--
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
SIZE
TTX/MIX
ON
ON
SLEEP
SLEEP
I/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
PRE-CH DUAL
PRE-CH
SIZE
LOCATE
LOCATE
P.SIZE
AUTO
TTX/MIX
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
LOCATE
PIP
PRE-CH
AUTO
CANCEL
P.SIZE
PIP
AUTO SUBPAGE SUBPAGE
ON
PIP
SIZE
LOCATE
CANCEL
SIZE
LOCATE
ON
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-17
BN68-00438D-02_en
6/11/03 7:11 PM
Page 18
Storing Channels Manually
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
You can store up to 100 channels, including those received via cable
networks. When
storing
channels manually, you can choose:
Power
Power
◆ Whether or not to store each of the channels found
◆ TheTV/VIDEO
programme
number
of each
stored
channel which
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Power TV/VIDEO
Power
you wish to identify
Channel
Colour system
Sound system
Search
Channel
Program
Store
AUTO
BG
471MHz
C4
P1
?
Channel
Colour system
Sound system
Search
Channel
Program
Store
AUTO
BG
471MHz
C4
P1
?
1
2
AUTO
BG
471MHz
C4
P1
?
S.STD
DISPLAY
STILL
S.STD
STILL
Result: P.STD
The main
menu is displayed.
Power
Power
P.STD
S.STD
S.STD
4
Press the P▼ or P▲ button to select the Manual store.
Press the
- or
+ button.
Result:
AUTO
BG
471MHz
C4
P1
?
S.STD
TV/VIDEO TV/VIDEO
PC
Channel
AUTO
BG
471MHz
C4
P1
OK
DISPLAY
STILL
STILL
S.STD
S.STD
DISPLAY
PC
DISPLAY
STILL
P.STD
The color standards are displayed in the following order:
AUTO -TV/VIDEO
PAL
TV/VIDEO
PC - SECAM
DISPLAY
PC - NT4.43
DISPLAY
STILL
STILL Power
Power
Press the P▼
or P▲MUTE
button to select theEXIT
Sound EXIT
system. Indicate
MUTE
TV/VIDEO TV/VIDEO
PC
P.STD
P.STD
S.STD
the sound standard
required
by pressing
the S.STD
- or
+ button
repeatedly.
-/--
-/--
PRE-CH
PRE-CH
PRE-CH
AUTO
PRE-CH
AUTO
MUTE
The sound standards are displayed in theP.STD
followingP.STD
order:
BG - DK - I - L
-/-TTX/MIX
7
DISPLAY
PC
If necessary, indicate the broadcasting standard required by
MUTE
EXIT
EXIT
pressingMUTE
the
Power- or
Power+ button repeatedly.
Result:
6
Power
The options available in the Manual store group are
MUTEdisplayed
MUTEwith the ColourEXIT
systemEXIT
is selected.
Power
-/-TTX/MIX
Power
MUTE
If you know the channel number to be stored, press the P▼ or P▲
button to select the Channel. Indicate the required number by
SLEEP TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
TTX/MIX
AUTO
AUTO
pressing
the
- PC
or
+ PC
button.DISPLAY
TV/VIDEO TV/VIDEO
DISPLAY
STILL
STILL
Power
S.STD
EXIT
EXIT
Power
If you do not know the channel numbers, press the P▼ or P▲ button
PRE-CH PIP
PRE-CH
-/-- SUBPAGE SUBPAGE
P.SIZE
P.SIZEI/II
PIP
DUAL
SLEEP
LIST/FLOF
DUAL
LIST/FLOF
CANCEL
CANCELthe
to selectSLEEP
the -/-Search.
Start
theI/IIsearch
by pressing
- or
+
P.STD
P.STD
S.STD
S.STD
TV/VIDEO TV/VIDEO
DISPLAY
DISPLAY
STILL
STILL
button.
ONPC
ONPC
SIZE
SIZE
LOCATE
LOCATE
TTX/MIX
TTX/MIX
MUTE
MUTE
EXITrange
EXIT
P.SIZE
PIPAUTO
PIPAUTO
SUBPAGE
SUBPAGE
Result: P.SIZE
The tuner
scans
the frequency
until the first
P.STD
P.STD
S.STD
S.STD
channel or the channel
that
is received
on
ONyou selected
ON
your screen.
MUTE
MUTE
SLEEP
8
DUAL
SLEEPI/II SIZE
LIST/FLOF
DUAL I/II LOCATE
LIST/FLOF
CANCELLOCATE
SIZE
-/--CANCEL -/--
To assign a programme number to a channel, select the Program
by pressingP.SIZE
the P▼ P.SIZE
or P▲ button.
PIP
PIP
SUBPAGE SUBPAGE
TTX/MIX
Press the
- or
+ button to find the TTX/MIX
correct number.
ON
Colour system
Sound system
Search
Channel
Program
Store
S.STD
Power
P.STD
5
Channel
Colour system
Sound system
Search
Channel
Program
Store
DISPLAY
PC
STILL
The options available
in theDISPLAY
ChannelSTILL
group are displayed.
Press the P.STD
- or P.STD
+ button.
Channel
AUTO
BG
471MHz
C4
P1
?
TV/VIDEO TV/VIDEO
PC
3
Result:
Colour system
Sound system
Search
Channel
Program
Store
DISPLAY
PC
Press the P▼ or P▲ button to select the Channel.
Result:
Channel
Colour system
Sound system
Search
Channel
Program
Store
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
Press the MENU button.
9
EXIT
PRE-CH
AUTO
AUTO
ON
Press the P▼ or P▲ button toSIZE
select the
Store.LOCATE
SIZE
LOCATE
SLEEP
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
Select the OK by pressing the
- or
+ button.DUAL
Result:
10
PRE-CH
The
programme
PRE-CH
PRE-CH number are
-/-- channel
-/-- and associated
MUTE
MUTE
EXIT P.SIZE
EXIT P.SIZE
PIP
SUBPAGE SUBPAGE
stored.
ON
-/-Repeat Steps
7 to TTX/MIX
9 for each channel toAUTO
be stored.
TTX/MIX
AUTO
MUTE
-/-EXIT SIZEEXIT LOCATE
SIZE
MUTE
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
CANCEL
P.SIZE
P.SIZE
SUBPAGE SUBPAGE
PIP
PIP SLEEP
TTX/MIX
PIP
ON
PRE-CH
LOCATE
AUTO
English-18
ON
-/--
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
SIZE PRE-CH
SIZE PRE-CH
LOCATE
LOCATEP.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
ON
TTX/MIX
TTX/MIX
-/--
-/-AUTO
AUTO
PRE-CH
PRE-CH SIZE
SIZE
LOCATE
BN68-00438D-02_en
6/11/03 7:11 PM
Page 19
Giving Channels Names
Power
Power
If channel name information is broadcast when you store the channels
either manually or automatically, the names are assigned to the
channels directly.
YouTV/VIDEO
can
names or assign new
TV/VIDEO
PC however
DISPLAY
PC change
DISPLAY
STILLthese
STILL
Power
Power
names as required.
1
2
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
S.STD
DISPLAY
STILL
S.STD
STILL
Result: P.STDThe main
P.STD menu is displayed.
S.STD
S.STD
Press the MENU button.
Power
DISPLAY
PC
Power
Press the P▼ or P▲ button to select the Channel.
Result:
The options available in the Channel group are displayed.
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
3
Press the Power
- or Power
+ button.
4
Press the P▼ or P▲ button to select the Name.
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Press theTV/VIDEO
- orTV/VIDEO
+ button.
P.STD
Result:
5
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
P.STD
Channel
P1
P2
P3
P4
-----------------
P1
P2
P3
P4
A----------------
The current channels are displayed.
P.STD MUTE
P.STD
MUTE
S.STD EXIT
S.STD
EXIT
If necessary, select the channel to be assigned to a new name
by pressing the P▼ or P▲ button.
MUTE
MUTE
EXIT
EXIT
6
Press the
7
Press the P▼ or P▲ button to select a letter (A~Z), a number(0~9)
or a symbol (-, space). Move on the previous or next letter by
pressing the
- or
+ button.
8
Repeat Steps 5 to 7 for each channel to be assigned to a new name.
- or
+ button.
MUTE
MUTE
-/--
-/--
EXIT
PRE-CH
MUTE
MUTE
-/--/-TTX/MIX
TTX/MIX
Channel
EXIT
PRE-CH
EXIT
EXIT
PRE-CH
AUTO PRE-CH
AUTO
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
CANCEL
AUTO
P.SIZE
SLEEP
-/--
P.SIZEI/II LIST/FLOF
PIP
PIP
SUBPAGE
SUBPAGE
DUAL
SLEEP
DUAL I/II LIST/FLOF
CANCEL
CANCEL
PRE-CH PRE-CH
-/-ON
ON
SIZE
SIZE
LOCATE
LOCATE
SUBPAGE
SUBPAGE
P.SIZE
P.SIZE
PIP
PIP
TTX/MIX TTX/MIX
AUTO
AUTO
ON
ON
PRE-CH PRE-CH
-/--/-SIZE
SIZE
LOCATE
LOCATE
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
TTX/MIX
P.SIZE
TTX/MIX
P.SIZE
AUTO
AUTO
PIP
SUBPAGE SUBPAGE
PIP
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL ON
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
LOCATE
PIP
SUBPAGE SUBPAGE
SIZE
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-19
BN68-00438D-02_en
6/11/03 7:11 PM
Page 20
Skipping Unwanted Channels
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip Power
are not Power
displayed.
All channels that
you doPC
not specifically
choose to
skip are displayed
TV/VIDEO
PC
DISPLAY
STILL
STILL
Power TV/VIDEO
Power DISPLAY
during scanning.
1
Channel
P1
P2
P3
P4
Added
Added
Added
Added
2
S.STD
DISPLAY
STILL
S.STD
STILL
Result:Power
The main
Power
P.STD
P.STDmenu is displayed.
S.STD
S.STD
DISPLAY
PC
Press the P▼ or P▲ button to select the Channel.
TV/VIDEO TV/VIDEO
PC
PC
DISPLAY
STILL
TheDISPLAY
options
available
in STILL
the Channel group are displayed.
Result:
3
4
Channel
P1
P2
P3
P4
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
Press the MENU button.
Erased
Added
Added
Added
Press the
P.STD
P.STD
- or
+ button.
S.STD
Press the P▼ or P▲ button to select the Add/Erase.
Press the
- or
+ button.
Result:
The stored channels are displayed.
MUTE
MUTE
EXIT
Press the P▼ or P▲ button to select the channel to add or erase.
If necessary, select the Added or Erased by pressing the
MUTE
EXIT
EXIT
- or MUTE + button.
6
Repeat Step 5 for each channel to be added or erased.
MUTE
EXIT
-/--
-/--
Fine Tuning Channel Reception
-/-TTX/MIX
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Power
EXIT
PRE-CH
PRE-CH
PRE-CH
AUTO
PRE-CH
AUTO
Power
If the reception
is clear,
you
notI/IIhave
to fine-tune
SLEEP
DUAL
SLEEP
I/II do
LIST/FLOF
DUAL
LIST/FLOF
CANCEL
CANCEL
TTX/MIX
TTX/MIX
AUTO
AUTO the channel,
as this is done automatically during the search and store operation.
If however
theTV/VIDEO
signal TV/VIDEO
is weak
orDISPLAY
distorted,
you may
PC
PC
DISPLAY
STILL
STILLhave to fine-tune
PRE-CH
-/--/-SUBPAGE
SUBPAGE
P.SIZE
P.SIZEI/II PRE-CH
PIP
PIP
SLEEP
DUAL
SLEEP
LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
the channel manually.
1
TTX/MIX
P.STD
TTX/MIX
P.SIZE
SLEEP
2
+ 1
3
ON
S.STD
SIZE
SIZE
LOCATE
AUTO
AUTO
PIP
SUBPAGE
SUBPAGE
Power
P.STD
P.SIZE
Press the MENU button.
TV/VIDEO TV/VIDEO
PC
Result:
English-20
-/-TTX/MIX
Power
Fine tune
EXIT
5
MUTE
Channel
S.STD
ON
S.STD
LOCATE
PIP
ON
DISPLAY
PC
DISPLAY
STILL ONSTILL
The main menu is displayed.
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
SIZE
CANCEL
SIZE
LOCATE
LOCATE
Press the P▼
or P▲P.STD
button to select the
Channel.
P.STD
S.STD
S.STD
P.SIZE
PIP
PIP Channel group are displayed.
Result:P.SIZE TheSUBPAGE
options SUBPAGE
available
in the
ON
ON
Press the
- or
SIZE
+ button.
SIZE
LOCATE
LOCATE
4
Press the P▼ or P▲ button to select the Fine tune.
5
Obtain a sharp and clear picture and good sound quality by
pressingMUTE
the
- or
+ button. EXIT
MUTE
EXIT
MUTE
-/--
TTX/MIX
MUTE
-/--
TTX/MIX
EXIT
EXIT
PRE-CH
PRE-CH
AUTO
AUTO
BN68-00438D-02_en
6/11/03 7:11 PM
Page 21
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Power
Power order in which the channels have been
◆ Modify
the numeric
automatically stored.
◆ Give
easily remembered
numbers
to the
channels that you
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Power TV/VIDEO
Power
watch most often.
1
2
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
S.STD
DISPLAY
STILL
S.STD
STILL
Result: P.STD
The main
menu is displayed.
Power
Power
P.STD
S.STD
S.STD
Press the MENU button.
DISPLAY
PC
Press the P▼ or P▲ button to select the Channel.
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Result: TV/VIDEO
The options
available
in the
ChannelSTILL
group are displayed.
Power
3
4
Channel
From
To
Store
P1 ----P-?
From
To
Store
P1
P3
?
From
To
Store
P3
P1
OK
Power
Press the P.STD- or P.STD+ button.
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
S.STD
S.STD
DISPLAY
STILL
STILL
Press the P▼ or P▲ button to select the Channel sort.
Press the Power
- or Power
+ button.
Result:
P.STD
P.STDavailable in the S.STD
The options
ChannelS.STD
sort group are
MUTE
MUTE
TV/VIDEO
TV/VIDEO
PC
PC isEXIT
DISPLAY
STILL EXIT
STILL
displayed
with theDISPLAY
From
selected.
5
Select the channel number that you wish to change by
P.STD MUTE
P.STD + button repeatedly.
S.STD EXIT
S.STD
EXIT
pressingMUTE
the
- or
6
Press the P▼ or P▲ button to select the To.
Select the new number by which you wish to identify the channel by
pressing the
- or
+ button repeatedly.
7
Press the P▼ or P▲ button to select the Store.
Select the OK to confirm the exchange of channel numbers by
-/-pressing the
--/-or
+ button.PRE-CH PRE-CH
MUTE
Result:
8
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
MUTE
EXIT
Channel
---------
EXIT
MUTE
MUTE channel is exchanged
EXIT
EXITthe one
The selected
with
Channel
---------
chosen
PRE-CH
-/--previously
-/-- stored to thePRE-CH
TTX/MIX
TTX/MIX
AUTO number.
AUTO
For all the channels to move to the required channel numbers,
MUTE 7 MUTE
EXIT pressing
EXIT the P▼ or P▲
repeat steps
after
select
From
SLEEP 5 to
DUAL
SLEEP
I/II LIST/FLOF
DUAL I/IItheLIST/FLOF
CANCEL
TTX/MIX
TTX/MIX
AUTO by CANCEL
AUTO
button.
PRE-CH PIP
PRE-CH
-/-- SUBPAGE SUBPAGE
P.SIZE-/-- DUAL
P.SIZEI/II
PIP
SLEEP
SLEEP
LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
ON
ON
SIZE
SIZE
LOCATE
TTX/MIX P.SIZE
TTX/MIXSUBPAGE
P.SIZE
PIPAUTO LOCATE
PIPAUTO
SUBPAGE
PRE-CH PRE-CH
-/--/-ON
ON
SLEEP
TTX/MIX
-/-P.SIZE
SLEEP
TTX/MIX
DUAL
SLEEPI/II SIZE
LIST/FLOF
DUAL I/II LOCATE
LIST/FLOF
CANCELLOCATE
CANCEL
SIZE
AUTO
AUTO
PRE-CH PRE-CH
PIP
PIP
SUBPAGE SUBPAGE
TTX/MIX
-/-P.SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
AUTO
SIZE
SIZE
LOCATE
TTX/MIX
PIP
SUBPAGE SUBPAGE
CANCEL
ON
AUTO
LOCATE
P.SIZE
P.SIZE
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
CANCEL
ON
SIZE
LOCATE
P.SIZE
P.SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
SIZE
PIP
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-21
BN68-00438D-02_en
6/11/03 7:11 PM
Page 22
Changing the Picture Standard
Power Power
TV/VIDEO TV/VIDEO
PC
Picture
Mode
Custom
Brightness
Contrast
Sharpness
Colour
Tint
Colour tone
Standard
Power
TV/VIDEO
PC
DISPLAY
P.STD
DISPLAY
STILL
STILL
Power
Power
TV/VIDEO TV/VIDEO
PC
1
Press the MENU button.
The main menu is displayed.
Result:
P.STD
P.STD
Press the P▼ or P▲ button to select the Picture.
The options available in the Picture group are displayed.
Result:
3
Press the
- or
+ button.
The Mode is selected.
Result:
4
Select the required picture effect by pressing the
- or
+
button repeatedly. The following picture effects are available:
DynamicMUTE
- Standard
MUTE - Movie - Custom.
EXIT
EXIT
➣
P
You can also set these options simply by pressing the
P.STD (Picture Standard) button.
MUTE
➣
MUTE
EXIT
SLEEP
PRE-CH
-/--
Power Power
Adjusting the Picture Settings
TTX/MIX TTX/MIX
AUTO
PRE-CH
TTX/MIX
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
SLEEP
SLEEP
I/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
Power DUAL
Power
AUTO
DUAL I/II LIST/FLOF
CANCEL
Picture
P.SIZE
PIP
SUBPAGE
Mode
Custom
ON
Brightness
Contrast SIZE
LOCATE
Sharpness
Colour
Tint
Colour tone
Standard
Brightness
Picture
1
P.SIZE
P.SIZE
PIP
SUBPAGE
SUBPAGE
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Power TV/VIDEO
Power
ON
Press the MENU button.
menu SIZE
is displayed.
Result: P.STDThe main
SIZE
LOCATE
P.STD
S.STD
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
S.STD
S.ST
EXIT
EXIT
PRE-CH
AUTO-/-STILL
CANCEL
TTX/MIX
-/--
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
PIP
STILL
SLEEP
ON
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
LOCATE
S.STD
P.SIZE Power
P.SIZE
Power
STILL
PIP
SUBPAGE SUBPAGE
CANCE
PIP
2
ON
Press the P▼ or P▲ button to select the Picture.
Picture
group
are
Result: P.STDThe options
SIZE STILL
LOCATE
LOCAT
P.STD available in the
S.STD
S.STD
TV/VIDEO
TV/VIDEO
PC displayed.
DISPLAY
PC SIZE DISPLAY
STILL
3
Press the
4
Select the option (Brightness, Contrast, Sharpness, Colour or
Tint) to be adjusted by pressing the P▼ or P▲ button.
Press the
- or
+ button.
bar is displayed.
Result: MUTEThe horizontal
MUTE
EXIT
EXIT
5
Press the
6
Press the
P▼ or P▲
the Colour
MUTE
MUTEbutton to select EXIT
EXIT tone.
Select the required option by pressing the the
- or
repeatedly. The following options are available:
Cool 2 MUTE
- Cool 1MUTE
- Normal - WarmEXIT
1 - Warm
EXIT2
ON
- or
+ button.
P.STD
➣
English-22
STIL
Your set has several
you to control
picture quality.
P.STD settings
P.STD which allowS.STD
S.STD
50
Mode
Custom
Brightness
Contrast
Sharpness
Colour
Tint
Colour tone
Standard
MUTE
DISPLAY
STILL
On the Picture menu, if you change the Brightness,
Contrast, Sharpness, Colour or Tint (NTSC only) settings,
the Custom is selected automatically.
-/--
-/--
DISPLAY
PC
2
STILL
S.STD
DISPLAY
PC
You can select the type of picture which best corresponds to your
viewing requirements.
P.STD
P.STD
S.STD
S.STD
- or
P.STD
TTX/MIX
-/--
TTX/MIX
-/--
SLEEP
-/-TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
PRE-CH
-/-TTX/MIX
AUTO PRE-CH
AUTO
P.SIZE
SLEEP
TTX/MIX
P.SIZE
PIP
SUBPAGE SUBPAGE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
ON
P.SIZE
S.STD
EXIT
EXIT
+ button to reach the required setting.
+ button
MUTE
MUTE
If you make any changes to these settings,
the picture
standard
is automatically
switched to Custom.
PRE-CH PRE-CH
-/--/--
P.SIZE
S.STD
AUTO
PRE-CH
AUTO
PRE-CH
PIP
-/-CANCEL
AUTO
ON
-/--
SIZE
SIZE
LOCATE
LOCATE
PIP
PIP
SUBPAGE SUBPAGE
TTX/MIX
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
BN68-00438D-02_en
6/11/03 7:11 PM
TV/VIDEO
Page 23
PC
DISPLAY
STILL
P.STD
S.STD
MUTE
EXIT
Selecting
the Picture Format
Power Power
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Power
Power
You can select the picture format which best corresponds to your
viewing requirements.
P.STD
P.STD
S.STD
S.STD
TV/VIDEO TV/VIDEO
PC
1
2
Press the MENU button.
The main menu is displayed.
Result:
P.STD
Function
DISPLAY
PC
P.STD
DISPLAY
STILL
S.STD
Sleep timer
PIP
STILL
Size
Language
Off
Normal
English
S.STD
PRE-CH
-/--
Press the P▼ or P▲ button to select the Function.
The options available in the Function group are displayed.
Result:
TTX/MIX
3
Press the
SLEEP
DUAL I/II LIST/FLOF
4
Press the P▼ or P▲ button to select the Size.
P.SIZE
SUBPAGE
PIP
5
Select the required picture format by pressing the
button repeatedly.
SIZE
LOCATE
- or
+ button.
AUTO
CANCEL
ON
➣
MUTE
MUTE
EXIT
- or
EXIT
You can also select these options simply by pressing the
P.SIZE (Picture Size) button.
MUTE
Normal
-/--
Normal
+
TTX/MIX
MUTE
EXIT
Wide
PRE-CH
-/--
TTX/MIX
Zoom
PRE-CH
AUTO WideAUTO
-/--
PRE-CH
-/--
Sets the picture
normal
Sets the
picture to 16:9 wide
SLEEPto 4:3
DUAL
SLEEP
I/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
mode. This is a standard TV
mode. TTX/MIX TTX/MIX
screen size.
P.SIZE
EXIT
P.SIZE
PIP
SUBPAGE SUBPAGE
ON
SIZE
SIZE
LOCATE
PIP
SLEEP
ON
LOCATE
P.SIZE
PRE-CH
Magnifies the size of the
AUTO
pictureAUTO
on screen.
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
Zoom
PIP
SUBPAGE SUBPAGE
SIZE
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
Freezing the Current Picture
➣ Not Available in PC mode.
Press the “STILL” button on the remote control to freeze the picture
on a given frame. To return to normal viewing, press the “STILL”
button again.
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
English-23
MUTE
-/--
EXIT
PRE-CH
BN68-00438D-02_en
6/11/03 7:12 PM
Page 24
Changing the Sound Standard
Power
You can selectTV/VIDEO
the type
of
special
sound
effect toSTILL
be used when
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Power Power
watching a given broadcast.
Sound
Mode
Bass
Treble
Dolby
Power
Custom
P.STD
:
Off
1
P.STD
S.STD
S.STD
TV/VIDEO TV/VIDEO
PC
Press the MENU button.
Result:
TV/VIDEO
PC
DISPLAY
P.STD
STILL
3
4
Press the
- or
S.STD
EXIT
EXIT
+ button.
Select the required sound effect by pressing the
- or
+
button repeatedly. The following sound effects are available:
MUTE
EXIT
EXIT
Custom - Standard - Music - Movie - Speech.
➣
MUTE
You can also set these options simply by pressing the
S.STD (Sound Standard) button.
MUTE
MUTE
EXIT
-/--
PRE-CH
-/--
Adjusting the Sound Settings
PRE-CH
PRE-CH
-/--
Power
TTX/MIX
SLEEP
S.STD
The Mode is selected.
MUTE
P
P.STD
The options available in the Sound group are displayed.
Result:
S.STD
STILL
Press the P▼ or P▲ button to select the Sound.
Result:
Power
DISPLAY
STILL
The main menu is displayed.
P.STD
2
DISPLAY
PC
TTX/MIX
AUTO
DUAL I/II LIST/FLOF
CANCEL
Sound
P.SIZE
Mode
Bass
Treble
Dolby
Power
TTX/MIX
AUTO
TV/VIDEO TV/VIDEO
PC
AUTO
-/--
TTX/MIX
P.STD
ON
:
LOCATE
TTX/MIX
2
Press the P▼ or P▲ button to select the Sound.
SIZE
3
Press the
4
Select the option (Bass or Treble) to be adjusted by pressing
the P▼ or P▲ button. Press the
- or
+ button.
- or
+ button.
51
Result:
5
AUTO
AUTO
TV/VIDEOS.STD
TV/VIDEO
PC S.STD
DISPLAY
PC
DISPLAY
STILL
STILL
PIP
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
ON
Result:
The main menu is displayed.
P.STD
P.STD
S.STD
S.STD
SIZE
SIZE
LOCATE
LOCATE
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
P.SIZE
PIP
Power
Power
Press the
MENU P.SIZE
button. SUBPAGE SUBPAGE
Result: P.STDThe options
SoundS.STD
group are displayed.
P.STD available in the
S.STD
Bass
PRE-CH
P.STD
1
Off
PRE-CH
DISPLAY
PC Power
DISPLAY
STILL
PowerSTILL
SLEEPcanDUAL
SLEEP
I/II LIST/FLOF
DUAL I/IIto LIST/FLOF
CANCEL
The sound settings
be adjusted
suit
your CANCEL
personal preferences.
PIP
SUBPAGE
Custom
SIZE
-/--
The horizontal bar is displayed.
MUTE
Press the
MUTE
- or
EXIT
MUTE
➣
EXIT
+ button to reach the required setting.
MUTE
EXIT
EXIT
If you make any changes to these settings,
the sound standard is automatically switched to Custom.
MUTE
MUTE
-/--
-/--
EXIT
PRE-CH
EXIT
PRE-CH
English-24
-/-- AUTO -/-- AUTO
TTX/MIX
TTX/MIX
SLEEP
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL TTX/MIX
I/II LIST/FLOF
CANCEL
TTX/MIXCANCEL
PRE-CH PRE-CH
-/--
P.SIZE
TTX/MIX
P.SIZE
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
PIPDUAL
SUBPAGE
SUBPAGE
SLEEP
SLEEPI/II PIP
LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
AUTO
AUTO
ON
ON
CANCEL
CANCE
PIP
ON
ON
SIZE
LOCATE
LOCAT
BN68-00438D-02_en
6/11/03 7:12 PM
Page 25
Enjoying the Dolby Sound
Power
Power
This feature provides
a home
theater-like
Dolby STILL
effect by mixing the
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
left and right speakers.
Power
1
Power
P.STD
P.STD
S.STD
S.STD
Press the MENU button.
Sound
Mode
Bass
Treble
Dolby
Custom
:
On
TV/VIDEO
TV/VIDEO
PC TheDISPLAY
PC menu
DISPLAY
STILL
STILL
Result:
main
is displayed.
2
Press the
P▼ or P▲ button
to select
the Sound.
P.STD
P.STD
S.STD
S.STD
Result:
Power
The options available in the Sound group are displayed.
3
Press the
4
Press the P▼ or P▲ button to select the Dolby.
5
For enjoying the Dolby sound effect, select the On by pressing the
- orMUTE + button.
MUTE
EXIT
EXIT
MUTE
- or
MUTE
+ button.
EXIT
TV/VIDEO
PC
DISPLAY
STILL
P.STD
S.STD
MUTE
EXIT
EXIT
Selecting the Sound Mode
PRE-CH
-/--/-You can set the sound
mode
by pressingPRE-CH
the “DUALI/II”
button.
When you press it, current sound mode is displayed on the screen.
TTX/MIX
TTX/MIX
AUTO
Audio type
PRE-CH PRE-CH
-/-SLEEP
SLEEPI/II LIST/FLOF
DUAL I/II MONO
LIST/FLOF
CANCEL
Mono DUAL
Stereo
TTX/MIX TTX/MIX
FM
P.SIZE
P.SIZE
Stereo
Dual
SLEEP
P.SIZE
NICAM
Stereo
➣
AUTO
CANCEL
STEREO
↔ MONO
AUTO
AUTO
PIP
PIP
SUBPAGE SUBPAGE
DUAL 1 ↔ONDUAL 2ON
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
SIZE MONO
SIZE
LOCATE
LOCATE
Mono
P.SIZE
PIP
PIPSTEREO
StereoSUBPAGE SUBPAGE
MONO
↔
ON
ON
Dual
SIZE
→ MONO → DUAL 1
SIZE
LOCATE
LOCATE
DUAL 2
→
-/--
DUAL 1/2
Default
Automatic
change
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
DUAL 1
Automatic
change
DUAL 1
◆ If the receiving conditions deteriorate, listening will
be easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
English-25
BN68-00438D-03eng
8/18/03 2:47 PM
Page 26
Viewing the Picture In Picture (PIP)
Function
Sleep timer
PIP
Size
Language
Off
Normal
English
Power within the main picture of PC MODE.
You can displayPower
a sub picture
In this way you can watch TV program or external A/V device such as
VCR or DVD (to
video_1,
watching PC Mode.
TV/VIDEO
TV/VIDEO
PCvideo_2,
DISPLAY
PC S-video),
DISPLAY
STILLwhileSTILL
Power
Power
1
P.STD
P.STD
S.STD
Press the
MENU
button.
TV/VIDEO
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Power
Result:
2
Function
PIP
:
TV/Video
Size
Locate
On
TV
Small
The main menu is displayed.
P.STD
Result:
:
TV/Video
Size
Locate
Press the
4
Press the P▼ or P▲ button to select the PIP.
Press the
- or
+ button.
5
- or
DISPLAY
P.STD
:
TV/Video
Size
Locate
On
TV
Small
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
P.STD
Power P.STD
Power
MUTE
EXIT
Select the On by pressing the
EXIT
- or
+ TV/VIDEO
button. TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
You
can
also
activate
the
PIP
simply
by
pressing
the
PIP
ON
MUTE
MUTE
EXIT
EXIT
button.
P.STD
STILL
S.STD
S.STD
EXIT
EXIT
Press the P▼ or P▲ button to select the TV/Video.
MUTEby pressing
MUTE the
EXIT
Select a source of the sub picture
- or EXIT+ button.
Result:
The sources are displayed in the following order:
TV
Power Power - VIDEO1 - VIDEO2 - S-VIDEO
S.STD
PIP
S.STD
The options available in the PIP group are displayed.
P.STD
STILL
Function
STILL
+ button.
TV/VIDEO TV/VIDEO
PC
➣
On
TV
Small
6
PC
S.STD
3
Power
TV/VIDEO
S.STD
The options available in the Function group are
displayed.
Power Power
P.STD
P.STD
S.STD
MUTE
PIP
P.STD
Press the P▼ or P▲ buttonTV/VIDEO
to selectTV/VIDEO
the
PC Function.
DISPLAY
PC
DISPLAY
STILL
Result:
Function
S.STD
STILL
Power
7
-/--
PRE-CH
-/--
PRE-CH
Press the P▼ or P▲ button to select the Size.
MUTE
MUTE
SelectTV/VIDEO
a PC
size of DISPLAY
the
the
- or
+ button.
TV/VIDEO
PC sub picture
DISPLAY
STILL by pressing
STILL
PRE-CH
-/--The TTX/MIX
-/-- are displayedPRE-CH
AUTO
AUTO order:
Result: TTX/MIX
sizes
in
the following
P.STD Small - Medium
S.STD
S.STD
- Large
P.STD
➣
MUTE
EXIT
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
TTX/MIX
Function
PIP
:
TV/Video
Size
Locate
On
TV
Small
8
TTX/MIX
ON
ON
AUTO
➣
AUTO
MUTE
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
MUTE
EXIT
EXIT
-/-SLEEP
SIZE
AUTO
AUTO
ON
PRE-CH CANCEL
PRE-CH
-/-SLEEP
DUAL
LIST/FLOF
I/II LIST/FLOF
CANCEL
SIZEI/II DUAL
LOCATE
LOCATE
CANCEL
P.SIZE P.SIZE
TTX/MIX
TTX/MIX
PIP
PIP
SUBPAGE SUBPAGE
AUTO
ON
SIZE
EXIT
AUTO
You can also move the
by pressing the
SIZEsub picture
SIZE simply
LOCATE
LOCATE
P.SIZE
P.SIZE TTX/MIX
PIP
PIP
SUBPAGETTX/MIX
SUBPAGE
LOCATE button.
ON
TTX/MIX
EXIT
Press the P▼ or P▲ button to select the Locate.
SIZE SUBPAGE
SIZE
LOCATE
LOCATE
P.SIZE
P.SIZE counterclockwise
PIPby pressing
PIP
SUBPAGE
Move the
sub picture
PRE-CH PRE-CH
-/-- the -/-SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
- or
+ button.
ON
ON
PRE-CH
-/--
CANCEL
AUTO
PRE-CH
-/--these options
-/-◆ You can also select
simply byMUTE
pressingPRE-CH
MUTE
the SIZE button.
P.SIZE
P.SIZEI/II LIST/FLOF
PIP
PIP
SUBPAGE
SUBPAGE
◆
Not Available
in PCI/II mode.
SLEEP
DUAL
SLEEP
DUAL
LIST/FLOF
CANCEL
CANCEL
ON
PIP
AUTO
ON
LOCATE
SLEEP
SIZEI/II LIST/FLOF
SIZE
LOCATE
SLEEP
DUAL I/II DUAL
LIST/FLOF
CANCEL LOCATE
CANCEL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
ON
-/--
-/--
PRE-CH
PRE-CH
AUTO
AUTO
English-26
TTX/MIX
TTX/MIX
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
SIZE
PIP
ON
SIZE
LOCATE
LOCATE
BN68-00438D-02_en
6/11/03 7:12 PM
Power
Page 27
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
Switching Off Automatically
Power
Power
You can select a time period of between 10 and 240 minutes after
your set automatically
switches
off.
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Power
1
Power
P.STD
Press the
MENU P.STD
button.
S.STD
S.STD
Result: TV/VIDEO
The main
menu isDISPLAY
displayed.
TV/VIDEO
PC
PC
DISPLAY
STILL
2
Result:
3
4
S.STD
- or
+ button.
The Sleep timer is selected.
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
MUTE
CANCEL
DISPLAY
STILL
ON
Select the number of minutes after which your set switches off by
pressing the
- or
+ button repeatedly.
MUTE
Normal
English
S.STD
The options available in the Function group are
displayed.
Press the
Result:
P.STD
EXIT
Off
STILL
Press the P▼ or P▲ button to select the Function.
P.STD
Function
MUTE
Sleep timer
PIP
Size
Language
EXIT
EXIT
◆ The preset time intervals: 10, 20, 30, 60, 90, 120, 150, 180, 210,
and 240 minutes.
➣
MUTE
MUTE
EXIT
EXIT
You can also select simply by pressing the “SLEEP” button.
If the sleep timer is already set, the screen displays the
remaining time and then your set will be switched off.
If the sleep timer is not yet set, displays Off.
-/--
TTX/MIX
-/--
-/--
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
PRE-CH
-/--
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
Displaying
Information
TTX/MIX TTX/MIX
SLEEP
PRE-CH
CANCEL
AUTO
PIP
SUBPAGE SUBPAGE
AUTO
PIP
ON
ON
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
SIZE
SIZE
LOCATE
LOCATE
You can view the setting status of selected source by pressing the
“DISPLAY” button
on theP.SIZE
remoteSUBPAGE
control.
The
information
P.SIZE
PIP displayed
PIP
SUBPAGE
are different depending on the selected source.
ON
ON
SIZE
SIZE
LOCATE
LOCATE
Power
TV/VIDEO
PC
P.STD
S.STD
MUTE
EXIT
English-27
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
BN68-00438D-02_en
6/11/03 7:12 PM
Page 28
Setting up Your PC Software (Based on Widows 2000)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Settings” on the Windows start menu.
While “Settings” is highlighted, move the cursor
so that “Control Panel” is highlighted.
2
When the control panel screen appears,
click on “Display” and a display
dialog-box will appear.
3
Navigate to the “Settings” tab on the display dialog-box.
The correct setting of size (resolution)
- 15” : 1024 x 768 pixels
- 17” : 1280 x 1024 pixels
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
English-28
BN68-00438D-02_en
6/11/03 7:12 PM
Power
Page 29
Power
Adjusting the Brightness and Contrast
➣
1
Preset to the
PC mode
by
the PC DISPLAY
button.
TV/VIDEO
TV/VIDEO
PCpressing
DISPLAY
PC
STILL
Power Power
P.STD
S.STD
S.STD
STILL
TV/VIDEO
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Press the
MENU
button.
Result:
The main menu is displayed.
Power
P.STD
2
P.STD
STILL
Power
P.STD
S.STD
S.STD
Press the P▼ or P▲ button to select the PC.
Result:TV/VIDEO
TheTV/VIDEO
options
inDISPLAY
the
PC group
PC available
DISPLAY
PC
STILL
STILLare displayed.
Power
3
Press the
Power
- or
+ button.
P.STD
P.STD
S.STD
Result:TV/VIDEO
TheTV/VIDEO
Image
PC is selected.
DISPLAY
PC
DISPLAY
STILL
4
Press the
- or
S.STD
STILL
+ button again.
P.STD
P.STD
S.STD
S.STD
Result: MUTEThe options
group are displayed.
MUTE available in the
EXITImageEXIT
5
PC
Image
Brightness
Contrast
Select the option (Brightness or Contrast) to be adjusted for the
color of your computer image by pressing the P▼ or P▲ button.
MUTE - or
MUTE + button.
EXIT
EXIT
Press the
Result:
6
PC
Image
Image lock
Position
Colour adjust
Recall
Auto adjustment
1024x768 48.2kHz 59.8Hz
The horizontal bar is displayed.
Press the
- or
+ button to reach the required setting.
MUTE
MUTE
EXIT
-/--
-/--
MUTE
MUTE
TTX/MIX
-/--
TTX/MIX
-/--
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
P.SIZE
-/-SLEEP
P.SIZE
PIP
PIP
SUBPAGE SUBPAGE
PRE-CH
PRE-CH
-/-DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
ON
ON
TTX/MIX
P.SIZE
-/--
TTX/MIX
P.SIZE
-/--
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL
CANCEL
SIZEI/II LIST/FLOF
SIZE
LOCATE
TTX/MIX
AUTO
CANCEL
LOCATE
AUTO
P.SIZE
SLEEP
P.SIZE
PIP
SUBPAGE SUBPAGE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
LOCATE
PIP
PRE-CH
EXIT
AUTO
PRE-CH
Brightness
90
EXIT
PRE-CH
EXIT
AUTO
PRE-CH
CANCEL
AUTO
SIZE
SIZE
LOCATE
LOCATE
AUTO
AUTO
PIP
PIP
SUBPAGE SUBPAGE
PRE-CH
PRE-CH
ON
ON
SIZE
ON
ON
SIZE
LOCATE
LOCATE
English-29
BN68-00438D-02_en
6/11/03 7:12 PM
Page 30
Adjusting the Image Quality
➣
PC
Image
Image lock
Position
Colour adjust
Recall
Auto adjustment
1024x768 48.2kHz 59.8Hz
Preset to the PC mode by pressing the PC button.
Power Power
This feature isTV/VIDEO
used to fine
tuneDISPLAY
and
getDISPLAY
the
best STILL
image by removing
PC
PC
STILL
Power TV/VIDEO
Power
noises that create unstable images with jitters and shimmers.
1
2
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
S.STD
DISPLAY
STILL
S.STD
STILL
Result: P.STDThe main
P.STD menu is displayed.
S.STD
S.STD
Press the MENU button.
Power
Power
Press the P▼ or P▲ button to select the PC.
Result:
The options available in the PC group are displayed.
TV/VIDEO TV/VIDEO
PC
PC
Image lock
Coarse
Fine
DISPLAY
PC
Power
Power
P.STD
P.STD
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
3
Press the
4
Press the
P▼ orTV/VIDEO
P▲
to
the ImageSTILL
Lock.
TV/VIDEO
PCbutton
DISPLAY
PC select
DISPLAY
STILL
Press the
- or
+ button.
- or
+ button.
Result: P.STDThe options
ImageS.STD
Lock group are
P.STD available in the
S.STD
MUTEdisplayed.
MUTE
EXIT
EXIT
5
Coarse
1344
Select the option (Coarse or Fine) to be adjusted for the quality of
MUTE image
MUTE by pressing theEXIT
EXITbutton.
your computer
P▼ or P▲
Press the
- or
+ button.
Result:
6
The horizontal bar is displayed.
Press the
MUTE
➣
- or
+ button to reach the required setting.
MUTE
EXIT
MUTE
-/-TTX/MIX
MUTE
-/-TTX/MIX
EXIT
PRE-CH
AUTO
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
P.SIZE
SLEEP
-/--
P.SIZEI/II LIST/FLOF
PIP
PIP
SUBPAGE
SUBPAGE
DUAL
SLEEP
DUAL
I/II LIST/FLOF
CANCEL
CANCEL
PRE-CH PRE-CH
-/-ON
ON
P.SIZE
TTX/MIX
-/--
P.SIZE
TTX/MIX
-/--
EXIT
PRE-CH
AUTO
SLEEP
TTX/MIX
SIZE
SIZE
LOCATE
LOCATE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
TTX/MIX
AUTO
AUTO
CANCEL
AUTO
SIZE SUBPAGE
SIZE
LOCATE
LOCATE
PIP
PIP
SUBPAGE
AUTO
AUTO
ON
ON
PRE-CH PRE-CH
P.SIZE
SLEEP
P.SIZE
PIP
SUBPAGE SUBPAGE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
LOCATE
PIP
SIZE
English-30
EXIT
This feature
may
width ofPRE-CH
the image.
-/--/-- change the PRE-CH
If necessary, adjust the position to center.
ON
ON
SIZE
LOCATE
LOCATE
BN68-00438D-02_en
6/11/03 7:12 PM
Power
Page 31
Power
Changing the Image Position
➣
1
Preset to the
PC mode
by
the PC DISPLAY
button.
TV/VIDEO
TV/VIDEO
PCpressing
DISPLAY
PC
STILL
Power
Power
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
Press the
MENUPower
button.
Power
DISPLAY
PC
S.STD
DISPLAY
STILL
Result: P.STDThe main
P.STD menu is displayed.
S.STD
2
STILL
S.STD
STILL
S.STD
TV/VIDEO
PC button
DISPLAY
PC
DISPLAY
STILL
Press the
P▼ orTV/VIDEO
P▲
to select
the PC. STILL
Power
Power
Result:
The options available in the PC group are displayed.
P.STD
P.STD
TV/VIDEO TV/VIDEO
PC
S.STD
DISPLAY
PC
DISPLAY
STILL
+ button.
S.STD
STILL
3
Press the
4
Press theP.STD
P▼ or P▲
the Position..
P.STDbutton to select S.STD
S.STD
Press the
- or
+ button.
5
- or
Select the
position
(H-Position or V-Position)
MUTE
MUTE
EXIT
EXIT to be adjusted by
pressing the P▼ or P▲ button.
Press the
- or
+ button.
MUTE
EXIT
Result: MUTEThe horizontal
bar is displayed.
6
Press the
MUTE
- or
PC
Image
Image lock
Position
Colour adjust
Recall
Auto adjustment
1024x768 48.2kHz 59.8Hz
PC
Position
H-Position
V-Position
EXIT
+ button to reach the required setting.
MUTE
EXIT
EXIT
H-Position
50
MUTE
-/--
MUTE
-/--
EXIT
PRE-CH
EXIT
PRE-CH
-/-TTX/MIX
-/-TTX/MIX
PRE-CH
AUTO
PRE-CH
AUTO
SLEEP
TTX/MIX
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
TTX/MIX
AUTO
AUTO
PRE-CH PRE-CH
-/--
P.SIZE
SLEEP
P.SIZEI/II LIST/FLOF
PIP
PIP
SUBPAGE
SUBPAGE
DUAL
SLEEP
DUAL
I/II LIST/FLOF
CANCEL
CANCEL
ON
ON
TTX/MIX
AUTO
AUTO
PRE-CH PRE-CH
-/-SIZE SUBPAGE
SIZE
LOCATE
LOCATE
P.SIZE
PIP
PIP
SUBPAGE
TTX/MIX
-/-P.SIZE
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
ON
ON
TTX/MIX
AUTO
AUTO
SIZE
SIZE
LOCATE
LOCATE
P.SIZE
SLEEP
P.SIZE
PIP
SUBPAGE SUBPAGE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
LOCATE
PIP
SIZE
ON
ON
SIZE
LOCATE
LOCATE
English-31
BN68-00438D-02_en
6/11/03 7:12 PM
Page 32
Power
Adjusting the Color
➣
PC
Image
Image lock
Position
Colour adjust
Recall
Auto adjustment
1024x768 48.2kHz 59.8Hz
PC
Mode
Red
Green
Blue
2
TV/VIDEO
TV/VIDEO
PCpressing
DISPLAY
PC
STILL
Preset to the
PC mode
by
the PC DISPLAY
button.
Power
Power
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
STILL
S.STD
DISPLAY
STILL
S.STD
STILL
Result: P.STDThe main
P.STDmenu is displayed.
S.STD
S.STD
Press the MENU button.
DISPLAY
PC
Power
Power
Press the P▼ or P▲ button to select the PC. TV/VIDEO TV/VIDEO
PC
Result:
DISPLAY
PC
P.STD
P.STD
Press the
4
Press the P▼ or P▲ button to select the Colour adjust.
Press the
- or
+ button.
STILL
- or
Power
+ button.
S.STD
S.STD
EXIT
EXIT
Power
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
Power available in the Colour adjust group are
Result: Power
The options
MUTEdisplayed
MUTEwith the Mode isEXIT
selected.EXIT
P.STD
TV/VIDEO
TV/VIDEO
PC
DISPLAY
PC by pressing
DISPLAY
STILL the
STILL - or
Select the
required
color mode
MUTEThe following
MUTE
EXIT
EXIT
repeatedly.
color modes
are available:
Custom ColourP.STD
1 - Colour 2 - S.STD
Colour S.STD
3.
P.STD
6
If you wish adjust the color which best corresponds to your viewing
requirements, select the option (Red, Green, orMUTE
Blue) to
be adjusted
MUTE
by pressing the P▼ or P▲ button.
Press the
- or
+ button.
Custom
Result:
50
+ button
The horizontal
bar is displayed.
PRE-CH PRE-CH
-/--/--
Press the
➣
Red
P.STD
5
7
- or
-/-TTX/MIX
MUTE
+ button to reach the required setting.
PRE-CH
AUTO
EXIT
-/-TTX/MIX
MUTE
PRE-CH
AUTO
EXIT
If you change the Red, Green, or Blue settings, the Mode is
SLEEP
DUAL
SLEEPI/II automatically.
LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
TTX/MIX
TTX/MIX
AUTO
AUTO
selected
to Custom
MUTE
P.SIZE
SLEEP
P.SIZE
MUTE
EXIT
-/--
EXIT
-/--
P.SIZEI/II LIST/FLOF
PIP
PIP
SUBPAGE
SUBPAGE
DUAL
SLEEP
DUAL
I/II LIST/FLOF
CANCEL
CANCEL
ON
ON
TTX/MIX
SIZE SUBPAGE
SIZE
LOCATE
LOCATE
P.SIZE
PIP
PIP
SUBPAGE
ON
-/--
SIZE
SIZE
LOCATE
PRE-CH
ON
SLEEP
LOCATE
PRE-CH
P.SIZE
TTX/MIX
-/--
TTX/MIX
-/--
AUTO
PRE-CH
-/--
TTX/MIX
P.SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
CANCEL
AUTO
P.SIZE
SLEEP
P.SIZE
PIP
SUBPAGE SUBPAGE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
LOCATE
PIP
SIZE
ON
ON
SIZE
LOCATE
LOCATE
PRE-CH
AUTO
AUTO
PIP
SUBPAGE SUBPAGE
AUTO
PRE-CH
SLEEP
TTX/MIX
PRE-CH
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
SIZE
English-32
DISPLAY
STILL
The options available in the PC group are displayed.
3
Custom
PC
Mode
Red
Green
Blue
1
Power
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
BN68-00438D-02_en
6/11/03 7:12 PM
Page 33
Initializing the Image Settings
➣
Power Power
Preset to the PC mode by pressing the PC button.
TV/VIDEO
PC
Power TV/VIDEO
Power
DISPLAY
PC
DISPLAY
STILL
STILL
You can replace all image settings with the factory default values.
1
2
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
S.STD
DISPLAY
STILL
S.STD
STILL
Result: Power
Power
P.STDThe main
P.STD menu is displayed.
S.STD
S.STD
Press the MENU button.
DISPLAY
PC
Press the P▼ or P▲ button to select the PC.
PC
Image
Image lock
Position
Colour adjust
Recall
Auto adjustment
1024x768 48.2kHz 59.8Hz
PC
DISPLAY
PC
STILL
STILL
Result:TV/VIDEO
TheTV/VIDEO
options
available
inDISPLAY
the
PC group
are displayed.
3
4
Press the
P.STD - or
P.STD + button.
S.STD
Press the P▼ or P▲ button to select the Recall.
Press the
- or
+ button.
Result:
Recall
Image recall
Colour recall
The options available in the Recall group are displayed.
MUTE
5
PC
S.STD
MUTE
EXIT
EXIT
Select the option (Image recall or Colour recall) to be replaced
by pressing the P▼ or P▲ button.
MUTE - or
MUTE + button.
EXIT
EXIT
Press the
Result:
The screen becomes black and return to original
view about a few seconds later.
MUTE
MUTE
-/--
-/--
Power
Power
EXIT
PRE-CH
EXIT
PRE-CH
Adjusting the PC Screen Automatically
➣
PRE-CH
-/--/-TTX/MIX
TTX/MIX
AUTO PRE-CH
AUTO
TV/VIDEO
TV/VIDEO
PCpressing
DISPLAY
PC
STILL
STILL
Power
Power
Preset to the
PC mode
by
the PC DISPLAY
button.
SLEEP TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
P.STD TV/VIDEO
P.STD
S.STD
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
CANCEL
AUTO
S.STD
STILL
1
Press the MENU button.
2
Press the
P▼ orTTX/MIX
P▲ button
to select
the PC.LOCATE
SIZE
SIZE
LOCATE
TTX/MIX
AUTO
AUTO
P.SIZE
P.SIZE
PIP
PIP
SUBPAGE
SUBPAGE
PRE-CH
PRE-CH
-/--/-P.SIZE
P.SIZE
PIP
PIP
SUBPAGE
SUBPAGE
SLEEP
DUAL
SLEEP
I/II LIST/FLOF
DUAL
I/II LIST/FLOF
CANCEL
CANCEL
Result: P.STDThe main
P.STD menu is displayed.
S.STD
S.STD
ON
ON
Result:
ON PC group
ON are displayed.
The options available in the
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL
CANCEL
CANCEL
SIZEI/II LIST/FLOF
SIZE
LOCATE
LOCATE
3
Press the
4
Press the
P▼ or P.SIZE
P▲ button
to select
the
adjustment.
P.SIZE
PIP Auto PIP
SUBPAGE
SUBPAGE
Press the
- or
+ button.
ON
ON
Result:
PC
Image
Image lock
Position
Colour adjust
Recall
Auto adjustment
1024x768 48.2kHz 59.9Hz
- or
+ button.
Auto adjustment
Please wait
The screen quality and position are automatically adjusted,
SIZE
SIZE
LOCATE
LOCATE
MUTEand the
MUTE
EXIT
EXITabout a few seconds
screen returns to original
view
later.
MUTE
MUTE
-/--
-/--
EXIT
EXIT
PRE-CH
PRE-CH
PRE-CH
AUTO
PRE-CH
AUTO
-/-TTX/MIX
-/-TTX/MIX
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
P.SIZE
SLEEP
P.SIZEI/II LIST/FLOF
PIP
PIP
SUBPAGE
SUBPAGE
DUAL
SLEEP
DUAL
I/II LIST/FLOF
CANCEL
CANCEL
ON
ON
P.SIZE
P.SIZE
SIZE SUBPAGE
SIZE
LOCATE
PIP
SUBPAGE
ON
CANCEL
AUTO
LOCATE
PIP
ON
English-33
BN68-00438D-02_en
6/11/03 7:12 PM
Page 34
Teletext Feature
Most television channels provide written information services
via teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➣
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English-34
BN68-00438D-02_en
6/11/03 7:12 PM
Page 35
Displaying the Teletext Information
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
You can display Teletext information at any time on your set.
P
☛
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
MENU
P
◆ Information may be missing
MUTE
◆ Some pages may not be displayed
1
2
Select the channel providing the Teletext service using the
P▼ or P▲ button.
Press the TTX/MIX button to activate the teletext mode.
Result:
3
4
The contents page is displayed. It can be redisplayed
at any time by pressing the
(index) button.
If you wish to display the actual broadcast at the same time as the
teletext page, press the TTX/MIX button again.
To return to normal viewing, press the CANCEL (
EXIT
1
2
3
4
5
6
7
8
9
PRE-CH
-/--
0
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
ON
) button.
SIZE
5
CANCEL
Press the EXIT button again to exit from the teletext display.
English-35
LOCATE
BN68-00438D-02_en
6/11/03 7:12 PM
Page 36
Selecting a Page by Number
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
P
Power
MENU
TV/VIDEO
PC
DISPLAY
P
P.STD
MUTE
Result:
STILL
S.STD
EXIT
1
2
3
4
5
6
7
8
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
2
The current page counter is incremented and the page
is then displayed.
If the selected page is linked with several secondary pages,
the secondary pages are displayed in sequence.
To freeze the display on a given page, press the
(hold) button.
Press the
(hold) button again to resume.
9
PRE-CH
-/--
Using the various display options:
0
MUTE
TTX/MIX
EXIT
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
English-36
To display...
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
SUBPAGE (
)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
BN68-00438D-02_en
6/11/03 7:12 PM
Page 37
MUTE
EXIT
Using FLOF to Select a Page
PRE-CH
-/--
The various topics included in the teletext pages are color-coded, and
can be selected by pressing the colored buttons on the remote control.
1
2
Display the teletext contents page by pressing the TTX/MIX button.
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
Power
TV/VIDEO
PC
DISPLAY
P.STD
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
CANCEL
STILL
S.STD
P
◆ Press the SUBPAGE (
Result:
MENU
) button.
P
The available subpages appear.
◆ Select the required sub-page.
Sub-pages can be scrolled by using the
MUTE
or
EXIT
button.
Power
TV/VIDEO
PC
DISPLAY
P.STD
S.STD
PRE-CH
-/--
Storing Teletext Pages
TTX/MIX
You can store up to four teletext pages to display them later at leisure.
1
Select the LIST mode using the LIST/FLOF (
Result:
➣
2
) button.
Four 3-digit numbers are displayed in different colors.
The LIST/FLOF ( ) button is used to switch between
the LIST and FLOF modes.
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored,
using a different colored button each time.
5
Press the
STILL
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
ON
EXIT
LOCATE
MUTE
CANCEL
1
2
3
4
5
6
7
8
9
PRE-CH
-/-0
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
ON
(store) button until the corresponding blocks blink.
English-37
BN68-00438D-02_en
6/11/03 7:12 PM
Page 38
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
your set and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE button has been pressed on the
remote control.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the set
and move it further away.
◆ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
“Check Signal Cable” message is
displayed.
◆ Check that the signal cable is firmly connected to the
PC or video sources.
◆ Check that the PC or video sources are turned on.
On PC mode, “Not Supported Mode”
message is displayed.
◆ Check the maximum resolution and the frequency of the
video Adapter.
◆ Compare these values with the data in the Display Modes Timing
Chart.
On PC mode, horizontal or vertical bars
appear to flicker, jitter or shimmer on the
image.
◆ Adjust the Coarse or Fine function.
On PC mode, screen is black and power
indicator light is steady amber or blinks
every 0.5 or 1 seconds.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press a key on the keyboard.
English-38
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the Power ( ) button.
Check the picture contrast and brightness settings.
Check the volume.
BN68-00438D-02_en
6/11/03 7:12 PM
Page 39
Troubleshooting: Before Contacting Service Personnel
On PC mode, image is not stable and
may appear to vibrate.
◆ Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme
to change the display settings.
➣
On PC mode, image is not centered
on the screen.
Your set supports multiscan display functions within the
following frequency domain:
Horizontal frequency 15” : 30 ~ 69 kHz
17” : 30 ~ 81 kHz
Vertical frequency -
56 ~ 75 Hz
Maximum refresh rate -
15” : 1024 x 768 @ 75Hz
17” : 1280 x 1024 @ 75Hz
◆ Adjust the horizontal and vertical position.
Power Saver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a
VESA DPMS compliant video card installed in your computer. You use a software utility installed on
your computer to set up this feature.
Normal Operation
Power-Saving Function mode
(EPA/NUTEK)
Horizontal Sync
Active
Inactive
Vertical Sync
Active
Inactive
Power Indicator
Green
Green, Blinking (1 sec interval)
LW15E33C : 48W (Max.)
LW17E34C : 58W (Max.)
Less than 3W
State
Power Consumption
➣
This set automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer’s mouse or press a key on the keyboard.
English-39
BN68-00438D-02_en
6/11/03 7:12 PM
Page 40
Technical and Environmental Specifications
Model
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
Frequency
Horizontal
Vertical
Display Color
Display Resolution
Optimum Mode
Maximum Mode
LW15E33C
15” Diagonal
17” Diagonal
304.1(H) x 228.1(V) mm
337.92(H) x 270.336(V) mm
a-si TFT active matrix
0.297 (H) x 0.297 (V) mm
0.264 (H) x 0.264 (V) mm
140/125 (Horizontal/Vertical)
140/110 (Horizontal/Vertical)
30 ~ 69 kHz
Power Consumption
Maximum
Power Saving
56 ~ 75 Hz
16,194,277 colors
1024 x 768 @ 60 Hz
1024 x 768 @ 75 Hz
Input Signal
Sync.
Video Signal
Power Supply
Input
Output
LW17E34C
Audio Characteristics
Audio Input 1
Audio Input 2 (PC)
Headphone Output
Frequency
Response
English-40
1280 x 1024 @ 60 Hz
1280 x 1024 @ 75 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
AC 90 ~ 264V(50 Hz / 60 Hz)
DC 14V/3A
DC 14V/3.5A
48 W
Dimensions (W x D x H) / Weight
TV Body
461 x 87.6 x 305.5 mm / 3.9 kg
With Stand
461 x 182.2 x 325.1 mm / 6.2 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
30 ~ 81 kHz
<3W
58 W
514.6 x 89.0 x 351.1 mm / 5.0 kg
514.6 x 180.9 x 371.3 mm / 7.7 kg
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%
- 13 °F to 113 °F (-25 °C to 45 °C)
5% to 95%
RCA Jack (L, R), 0.5Vrms (-9dB)
3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output (3.5Ø Stereo Jack, 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at- 3dB)
BN68-00438D-02_en
6/11/03 7:12 PM
Page 41
Display Modes
If the signal from the system equals to the standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring
to the Video card user guide because the screen might not display or only the power LED might be on.
For the display modes listed below, the screen image has been optimized during manufacture.
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VGA
720 x 400
640 x 480
640 x 480
31.469
31.469
37.500
70.087
59.940
75.000
28.322
25.175
31.500
-/+
-/-/-
SVGA
800 x 600
46.875
75.000
49.500
+/+
XGA
1024 x 768
1024 x 768
48.363
60.023
60.004
75.029
65.000
78.750
-/+/+
SXGA
(LW17E34C)
1280 x 1024
1280 x 1024
63.981
79.976
60.020
75.025
108.000
135.000
+ / -, + / +/+
English-41
BN68-00438D-02_en
6/11/03 7:12 PM
Page 42
Maintenance of Your Television
To avoid risk of electric shock, do not disassemble the TV cabinet (except for gaining access to the
cable connectors as described on page 7).
Users cannot service the TV. User maintenance is restricted to cleaning as explained below:
Unplug the television from the power outlet before cleaning.
◆ When you clean the TFT-LCD and the panel outside, please apply the recommended small
amount of cleaner by using soft and dry cloth and polish it. Let your television screen not to be
forced but to be scrubbed out softly. If excessive force is applied, you can have a stain on it.
◆ Never use flammable cleaning material to clean your television or any other electrical
apparatus.
English-42
BN68-00438D-02_en
6/11/03 7:12 PM
Page 43
How to assemble the TV set and stand base
Note : The curved side of the stand base should be placed at the
back of the TV set as shown in the above figure.
English-43
BN68-00438D-02_en
6/11/03 7:12 PM
Page 44
Installing the Wall Mount Kit (Sold separately)
1
2
English-44
BN68-00438D-02_en
6/11/03 7:12 PM
Page 45
Installing the Wall Mount Kit (Sold separately)
3
4
English-45
BN68-00438D-02_en
6/11/03 7:12 PM
Page 46
Wiring the Mains Power Supply Plug (UK Only)
◆ IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse
is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same
rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same color as the pin face of the plug. Replacement
covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the
cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead
or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse
and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock
hazard from the bared flexible cord.
◆ IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As these colors may not correspond to the colored markings identifying the terminals in your plug,
proceed as follows:
The wire colored BLUE must be connected to the terminal marked with the letter N or colored BLUE or BLACK.
The wire colored BROWN must be connected to the terminal marked with the letter L or colored BROWN or RED.
WARNING:
English-46
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED
WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLORED GREEN OR GREEN
AND YELLOW.
BN68-00438D-02_en
6/11/03 7:12 PM
Page 47
Memo
English-47
BN68-00438D-02_en
6/11/03 7:12 PM
Page 48
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
ELECTRONICS