Download Samsung LW15E33C Specifications
Transcript
BN68-00438E-02Cover 8/18/03 6:20 PM Page 1 LCD TV LCD TV - AFTER SALES SERVICE LW15E33C LW17E34C - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ELECTRONICS LW15E33C/LW17E34C BN68-00438E-02 ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT BN68-00438D-02_en 6/11/03 7:11 PM Page 1 LCD TV LW15E33C LW17E34C Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT BN68-00438D-03eng 8/18/03 11:11 AM Page 2 Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ☛ The main voltage is indicated on the rear of your set and the frequency is 50 or 60 Hz. Information in this document is subject to change without notice. © 2003 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.; Microsoft, Windows® and Windows® NT are registered trademark of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. TRADEMARK & LABEL LICENSE NOTICE Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. European Notice (Europe Only) Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: ■ EN55022:1998+A1:2000 - Radio Frequency Interference ■ EN55024:1998 - Electromagnetic Immunity ■ EN55013:1990+A12:1994+A13:1996+A14:1999 - Radio Frequency Interference ■ EN55020:1994+A11:1996+A12/A13/A14:1999 - Electromagnetic Immunity ■ EN61000-3-2:1995+A1/A2:1998 - Power Line Harmonics ■ EN61000-3-3:1995 - Voltage Fluctuations ■ EN60065:1997 or EN60095:1998 - Product Safety English-2 BN68-00438D-02_en 6/11/03 7:11 PM Page 3 Safety Instructions These illustrations represent precautions concerning your set. Do NOT expose your set to extreme temperature or humidity conditions. Do NOT expose your set to direct sunlight. Do NOT expose your set to any liquids. If your set is broken, do not try to repair it yourself. Contact qualified service personnel. During storm conditions (especially when there is lightning) unplug your set from the mains socket and aerial. Keep all power adaptors apart. Possible fire hazard. Always keep the power adaptor in a well-ventilated area. Remove and discard the plastic cover from the power adaptor before use. Possible fire hazard. Keep the power adaptor away from any other heater. Possible fire hazard. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS English-3 BN68-00438D-02_en 6/11/03 7:11 PM Page 4 Contents ◆ FOREWORD ■ ■ Caution .......................................................................................................... Safety Instructions .......................................................................................... 2 3 ◆ CONNECTING AND PREPARING YOUR TV ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Viewing the Control Panel ............................................................................. Viewing the Connection Panel ....................................................................... - Connecting an Aerial or Cable Television Network .................................... - Connecting Set-Top Box, VCR, or DVD...................................................... - Connecting Computer ............................................................................... - Connecting External A/V Devices ............................................................... - Kensington Slot ........................................................................................... Viewing Pictures From External Sources......................................................... Inserting the Batteries in the Remote Control.................................................. Viewing the Remote Control (All Functions Except Teletext) .......................... Viewing the Remote Control (Teletext Functions)........................................... Switching On and Off .................................................................................... Placing in Standby Mode ............................................................................... Becoming Familiar with the Remote Control.................................................. Choosing Your Language................................................................................ 6 7 8 8 8 9 9 10 11 12 13 14 14 15 16 ◆ SETTING THE CHANNELS ■ ■ ■ ■ ■ ■ Storing Channels Automatically...................................................................... Storing Channels Manually............................................................................. Giving Channels Names................................................................................. Skipping Unwanted Channels ........................................................................ Fine Tuning Channel Reception ..................................................................... Sorting the Stored Channels ........................................................................... 17 18 19 20 20 21 ◆ USING THE VARIOUS FUNCTIONS ■ ■ ■ ■ English-4 Changing the Picture Standard ....................................................................... Adjusting the Picture Settings ......................................................................... Selecting the Picture Format........................................................................... Freezing the Current Picture........................................................................... 22 22 23 23 BN68-00438D-02_en 6/11/03 7:11 PM Page 5 Contents ◆ USING THE VARIOUS FUNCTIONS ■ ■ ■ ■ ■ ■ ■ Changing the Sound Standard ........................................................................ Adjusting the Sound Settings .......................................................................... Enjoying the Dolby Sound.............................................................................. Selecting the Sound Mode.............................................................................. Viewing the Picture In Picture (PIP)................................................................ Switching Off Automatically........................................................................... Displaying Information................................................................................... 24 24 25 25 26 27 27 ◆ USING THE PC FUNCTIONS ■ ■ ■ ■ ■ ■ ■ Setting up Your PC Softerware (Based on Windows 2000) ............................. Adjusting the Brightness and Contrast ............................................................ Adjusting the Image Quality........................................................................... Changing the Image Position.......................................................................... Adjusting the Color ........................................................................................ Initializing the Image Settings......................................................................... Adjusting the PC Screen Automatically .......................................................... 28 29 30 31 32 33 33 ◆ USING THE TELETEXT FEATURE ■ ■ ■ ■ ■ Teletext Feature.............................................................................................. Displaying the Teletext Information................................................................ Selecting a Page by Number .......................................................................... Using FLOF to Select a Page .......................................................................... Storing Teletext Pages..................................................................................... 34 35 36 37 37 ◆ RECOMMENDATIONS FOR USE ■ ■ ■ ■ ■ ■ ■ ■ Troubleshooting: Before Contacting Service Personnel................................... Power Saver ................................................................................................... Technical and Environmental Specifications .................................................. Display Modes ............................................................................................... Maintenance of Your Telelvision.................................................................... How to assemble the TV set and stand base................................................... Installing the Wall Mount Kit.......................................................................... Wiring the Mains Power Supply Plug (UK Only) ............................................ Symbols Press ☛ ➢ Important Note 38 39 40 41 42 43 44 46 English-5 BN68-00438D-02_en 6/11/03 7:11 PM Page 6 Viewing the Control Panel TV/VIDEO Displays a menu of all of the available input sources (TV - Video1 - Video2 - S-Video - PC). MENU Opens the on-screen menu. - + Moves the selector left or right on the OSD. Increases or decreases the level of audio volume and the values of the selected function. Moves the selector up or down on the OSD. Increases or decreases the channel number. English-6 POWER Turns ON/OFF your set. SPEAKER Power Indicator Lights up when you turn the power off. REMOTE CONTROL SENSOR BN68-00438D-02_en 6/11/03 7:11 PM Page 7 Viewing the Connection Panel Option Power Input ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English-7 BN68-00438D-02_en 6/11/03 7:11 PM Page 8 Viewing the Connection Panel Connecting an Aerial or Cable Television Network (depending on the model) To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting Set-Top Box, VCR, or DVD - Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD. - If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set. Connecting Computer - Connect the 15 Pin D-SUB connector to the PC video connector. - Connect the stereo audio cable to “Audio (ST)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer. - If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to the driver installation instructions included with your CD package. ➣ 15 Pin D-SUB connector English-8 Pin Separate H/V Composite H/V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Red (R) Green (G) Blue (B) Grounding Grounding (DDC return) Grounding - Red (R) Grounding - Green (G) Grounding - Blue (B) No connection Grounding - Sync. / Self test Grounding DDC - SDA (Date) Horizontal Sync. Vertical Sync. DDC - SCL (Clock) Red (R) Green (G) Blue (B) Grounding Grounding (DDC return) Grounding - Red (R) Grounding - Green (G) Grounding - Blue (B) No connection Grounding - Sync. / Self test Grounding DDC - SDA (Date) Horizontal/Vertical Sync. Not used DDC - SCL (Clock) BN68-00438D-02_en 6/11/03 7:11 PM Page 9 Viewing the Connection Panel Connecting External A/V Devices - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD, or Camcorder. - Connect RCA audio cables to “AUDIO (L)” and “AUDIO (R)” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. - Headphone may be connected to the headphone output (Ø) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled. Kensington Slot - This television has been designed to apply a burglarproof lock. ➢ Retractable Stand Tilt the screen until you feel comfortable. The maximum tilt angle is 10 degree to the backward direction. Please do not tilt the television other than specified range. Excessive force to tilt the television other than specified range may give permanent damage to the mechanical part of the stand. English-9 BN68-00438D-02_en 6/11/03 7:11 PM Page 10 Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. Power TV/VIDEO PC DISPLAY P.STD STILL S.STD 1 Check that all the necessary connections have been made (refer to pages 8 and 9 for further details). 2 Switch your set on and if necessary, press the TV/VIDEO button repeatedly. The input sources are displayed in the following order: TV - VIDEO1 - VIDEO2 - S-VIDEO - PC. MUTE EXIT PRE-CH -/-- TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE ON English-10 BN68-00438D-02_en 6/11/03 7:11 PM Page 11 Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase your set ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ + on the battery against + on the remote control ◆ - on the battery against - on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. ➣ Do not mix battery types, i.e. alkaline and manganese. English-11 BN68-00438D-02_en 6/11/03 7:11 PM Page 12 Viewing the Remote Control (All Functions Except Teletext) Select to the PC mode directly Power Television On/Off TV/VIDEO PC DISPLAY STILL Available sources selection Display the setting information Picture freeze P.STD S.STD Picture effect selection Sound effect selection Next channel Menu display and change confirmation P MENU Volume decrease Volume increase P Previous channel MUTE EXIT Temporary sound switch-off Numeric buttons for direct channel access Exit from the OSD/ Picture-In-Picture Off 1 2 3 4 5 6 7 8 9 PRE-CH -/-- One/Two-digit channel selection Previous channel 0 TTX/MIX Sound mode selection AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE Self-adjust to the incoming video signal Automatic switch-off Picture size selection ON Picture-In-Picture On/ PIP source selection PIP location selection PIP size selection ➣ English-12 The performance of the remote control may be affected by bright light. BN68-00438D-02_en 6/11/03 7:11 PM Page 13 Viewing the Remote Control (Teletext Functions) Power TV/VIDEO PC DISPLAY P.STD STILL S.STD Teletext next page Programme selection by name P MENU P Teletext previous page MUTE EXIT Exit from the Teletext display 1 2 3 4 5 6 7 8 9 PRE-CH -/-0 Teletext display/ mix both teletext information and the normal broadcast Teletext hold Teletext reveal TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE PIP SIZE LOCATE Teletext store Teletext size selection CANCEL Teletext mode selection (List or Flof) Teletext cancel ON Teletext sub-page Fastext topic selection English-13 BN68-00438D-02_en 6/11/03 7:11 PM Page 14 Switching On and Off The mains lead is attached to the rear of your set. ☛ Power TV/VIDEO PC DISPLAY P.STD If you have purchased this set in the United Kingdom, refer to page 42 for further instructions on plug wiring. STILL S.STD 1 Plug the mains lead into an appropriate socket. Result: MUTE A Standby indicator lights off on the front panel. 2 Press the Power ( 3 To switch off, press the Power ( ) button to switch on. ) button again. EXIT PRE-CH -/-- TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE Placing in Standby Mode ON Your set can be placed in Standby mode, in order to reduce the power consumption. Power TV/VIDEO PC DISPLAY P.STD STILL The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). S.STD 1 Press the Power ( 2 To switch back on, simply press the Power ( or a numeric button. ➣ MUTE EXIT PRE-CH -/-- TTX/MIX SLEEP P.SIZE AUTO DUAL I/II LIST/FLOF English-14 CANCEL SUBPAGE PIP SIZE LOCATE ON ) button. ) button again Do not leave your set in Standby mode for long periods of time (when you are away on holiday, for example). Turn off by pressing the ( ) button. It is best to unplug the set from the mains and aerial. BN68-00438D-02_en 6/11/03 7:11 PM Page 15 Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up your set using the on-screen menu system Power The following table presents the most frequently used buttons and their functions. Power PC TV/VIDEO P.STD TV/VIDEO DISPLAY STILL S.STD ▲ P Power P ▼ MUTE EXIT EXIT TV/VIDEO PRE-CH PRE-CH 9 -/-- SLEEP P.SIZE STILL S.STD Menu Function Used to display the next stored channel. Used to select the previous menu option. Used to display the previous stored channel. Used to select the next menu option. PC DISPLAY STILL Used to switch repeatedly between the last two channels displayed. (PRE-CH; Previous Channel) P MENU P MUTE EXIT 1 2 3 Used to display the corresponding channels. 4 5 6 7 8 PRE-CH AUTO TTX/MIX DUAL I/II LIST/FLOF SLEEP PC DISPLAY S.STD to 0 /VIDEO Viewing Function P.STD -/-TTX/MIX Power PC P.STD Button -/-- TV/VIDEO DISPLAY S.STD STILL PC P.STD MUTE Power AUTO CANCEL SUBPAGE DUAL I/II LIST/FLOF PIP CANCEL DISPLAY STILL ON SUBPAGELOCATE SIZE PIP P.SIZE ON LOCATE SIZE P.STD S.STD Used to select a channel numbered ten or over. Press this button, and the “--” symbol is displayed. Enter the two-digit channel number. Used to decrease the volume. Used to... ◆ Display a submenu containing selections for the current menu option. Power Power ◆ Search forwards manually for channels ◆ Reduce a menu option value. EXIT TV/VIDEO TV/VIDEO PC Used to increase the volume. P.STD EXIT Used to switch the sound off temporarily. -/-- ➣ SLEEP EXIT SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE PIP SIZE LOCATE DUAL I/II LIST/FLOF STILL Used to return to the previous menu or normal viewing. CANCEL MUTE MUTEsystem and return EXITto normal EXIT Used to exit from the menu viewing directly. SUBPAGE PIP ON TX/MIX AUTO LEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE LOCATE CANCEL PIP ON SIZE SIZE -/-- -/-- PRE-CH PRE-CH AUTO AUTO LOCATE TTX/MIX TTX/MIX SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL P.SIZE P.SIZE PIP SUBPAGE SUBPAGE ON CANCEL PIP ON CANCEL ON To turn PRE-CH the sound back on, press this button again, or press the - or + button. Used to displayAUTO the on-screen menu system. PRE-CH P.SIZE -/-- DISPLAY PC DISPLAY STILL AUTO Used to... ◆ Display a submenu containing selectionsS.STD for the current P.STD S.STD menu option. ◆ Search backwards manually for channels ◆ Increase a menu option value. MUTE TTX/MIX MENU 0 TTX/MIX MUTE MUTE 9 PRE-CH -/-- English-15 BN68-00438D-02_en 6/11/03 7:11 PM Page 16 Choosing Your Language Power TV/VIDEO PC DISPLAY P.STD STILL S.STD Power Power When you start using your set for the first time, you must select the language which will be used displaying menusSTILL and indications. TV/VIDEO TV/VIDEO PC for DISPLAY PC DISPLAY STILL Power P 1 MENU Press theP.STD MENU P.STD button. S.STD Power S.STD PC The main menu is displayed. TV/VIDEO TV/VIDEO Result: DISPLAY PC DISPLAY STILL STILL S.STD S.STD EXIT EXIT P 2 MUTE EXIT Result: The options available in the Function group are displayed. 3 Press the Off 4 Press the P▼ or P▲ button to select the Language. Normal PRE-CH English 5 Select a particular language by pressing the - or repeatedly. MUTE MUTE EXIT EXIT 6 When you are satisfied with your choice, press the EXIT button to return to normal viewing. Function Sleep timer PIP Size -/-Language Press the P▼ or P▲ button to select the Function. P.STD P.STD TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE - or + button. MUTE ON -/-- TTX/MIX SLEEP -/-- TTX/MIX PRE-CH PRE-CH AUTO AUTO -/-- DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL P.SIZE PIP SUBPAGE SUBPAGE ON SIZE SIZE LOCATE MUTE -/-- PRE-CH TTX/MIX AUTO AUTO PIP SLEEP ON DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL LOCATE P.SIZE P.SIZE PIP SUBPAGE SUBPAGE SIZE English-16 PRE-CH CANCEL TTX/MIX P.SIZE + button PIP ON ON SIZE LOCATE LOCATE BN68-00438D-02_en 6/11/03 7:11 PM Page 17 Storing Channels Automatically You can scan for the frequency ranges available to you Power Power (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL PoweryouPower clear any channels do not wish to watch. P.STD 1 Result: P.STD S.STD S.STD TV/VIDEO TV/VIDEO PC Channel DISPLAY PC DISPLAY STILL STILL S.STD S.STD The options available in the Channel group are displayed. Press the Power - or Power + button. P.STD Result: 4 S.STD STILL Press the P▼ or P▲ button to select the Channel. Result: 3 S.STD Power Power The main menu is displayed. P.STD 2 P.STD TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL Press the MENU button. Channel Auto store Manual store Name Add/Erase Fine tune Channel sort P.STD TV/VIDEO TV/VIDEO PC - or DISPLAY PC DISPLAY STILL + button again. STILL Result: MUTEThe options store group are MUTE available in the EXITAuto EXIT P.STDdisplayed P.STD with the Country S.STD S.STD is selected. Channel Country Search 5 Select your country by pressing the - or + button repeatedly. MUTE countries MUTE are available:EXIT EXIT The following Belgie - Deutschland - Espania - France - Italia - Nederland - Schweiz - Sverige - UK - East Europe. 6 Press the P▼ or P▲ button to select the Search, MUTE MUTE and then press the - or + button. EXIT Search Program Frequency Band The search will end automatically. Channels are sorted PRE-CHreflects PRE-CH -/--and stored -/-- in an order which their position in the 7 MUTE TTX/MIX MUTE TTX/MIX EXIT AUTO UK EXIT frequency range, (with lowest first and highest last). The programme originally selected is then displayed. ➣ UK The Auto store is selected. Press the Result: Country Search P1 43MHz VHF-L EXIT AUTO PRE-CH PRE-CH -/-- the search -/-To stop before it has finished, press the EXIT button. When the channels have beenI/IIstored, you can: SLEEP DUAL SLEEP I/II LIST/FLOF DUAL LIST/FLOF CANCEL CANCEL TTX/MIXchannels TTX/MIX AUTO AUTO ◆ Change ◆ Assign a name to the stored channels (refer -/--/-- to page 19) PRE-CH P.SIZE P.SIZE PIP ◆ Clear a channel (referSUBPAGE to pageSUBPAGE 20)PIP DUAL SLEEPI/IIreception LIST/FLOF DUAL I/II ifLIST/FLOF CANCEL CANCEL ◆ FineSLEEP tune channel necessary (refer ON ON to page 20) ◆ Sort them in the order required (refer to page 21) TTX/MIX TTX/MIX AUTO P.SIZE P.SIZE -/-- -/-- SIZE SIZE LOCATE PIP SUBPAGE SUBPAGE SIZE TTX/MIX ON ON SLEEP SLEEP I/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL PRE-CH DUAL PRE-CH SIZE LOCATE LOCATE P.SIZE AUTO TTX/MIX SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL P.SIZE P.SIZE PIP SUBPAGE SUBPAGE SIZE LOCATE PIP PRE-CH AUTO CANCEL P.SIZE PIP AUTO SUBPAGE SUBPAGE ON PIP SIZE LOCATE CANCEL SIZE LOCATE ON PIP ON ON SIZE LOCATE LOCATE English-17 BN68-00438D-02_en 6/11/03 7:11 PM Page 18 Storing Channels Manually Channel Auto store Manual store Name Add/Erase Fine tune Channel sort You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Power Power ◆ Whether or not to store each of the channels found ◆ TheTV/VIDEO programme number of each stored channel which PC DISPLAY PC DISPLAY STILL STILL Power TV/VIDEO Power you wish to identify Channel Colour system Sound system Search Channel Program Store AUTO BG 471MHz C4 P1 ? Channel Colour system Sound system Search Channel Program Store AUTO BG 471MHz C4 P1 ? 1 2 AUTO BG 471MHz C4 P1 ? S.STD DISPLAY STILL S.STD STILL Result: P.STD The main menu is displayed. Power Power P.STD S.STD S.STD 4 Press the P▼ or P▲ button to select the Manual store. Press the - or + button. Result: AUTO BG 471MHz C4 P1 ? S.STD TV/VIDEO TV/VIDEO PC Channel AUTO BG 471MHz C4 P1 OK DISPLAY STILL STILL S.STD S.STD DISPLAY PC DISPLAY STILL P.STD The color standards are displayed in the following order: AUTO -TV/VIDEO PAL TV/VIDEO PC - SECAM DISPLAY PC - NT4.43 DISPLAY STILL STILL Power Power Press the P▼ or P▲MUTE button to select theEXIT Sound EXIT system. Indicate MUTE TV/VIDEO TV/VIDEO PC P.STD P.STD S.STD the sound standard required by pressing the S.STD - or + button repeatedly. -/-- -/-- PRE-CH PRE-CH PRE-CH AUTO PRE-CH AUTO MUTE The sound standards are displayed in theP.STD followingP.STD order: BG - DK - I - L -/-TTX/MIX 7 DISPLAY PC If necessary, indicate the broadcasting standard required by MUTE EXIT EXIT pressingMUTE the Power- or Power+ button repeatedly. Result: 6 Power The options available in the Manual store group are MUTEdisplayed MUTEwith the ColourEXIT systemEXIT is selected. Power -/-TTX/MIX Power MUTE If you know the channel number to be stored, press the P▼ or P▲ button to select the Channel. Indicate the required number by SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL TTX/MIX AUTO AUTO pressing the - PC or + PC button.DISPLAY TV/VIDEO TV/VIDEO DISPLAY STILL STILL Power S.STD EXIT EXIT Power If you do not know the channel numbers, press the P▼ or P▲ button PRE-CH PIP PRE-CH -/-- SUBPAGE SUBPAGE P.SIZE P.SIZEI/II PIP DUAL SLEEP LIST/FLOF DUAL LIST/FLOF CANCEL CANCELthe to selectSLEEP the -/-Search. Start theI/IIsearch by pressing - or + P.STD P.STD S.STD S.STD TV/VIDEO TV/VIDEO DISPLAY DISPLAY STILL STILL button. ONPC ONPC SIZE SIZE LOCATE LOCATE TTX/MIX TTX/MIX MUTE MUTE EXITrange EXIT P.SIZE PIPAUTO PIPAUTO SUBPAGE SUBPAGE Result: P.SIZE The tuner scans the frequency until the first P.STD P.STD S.STD S.STD channel or the channel that is received on ONyou selected ON your screen. MUTE MUTE SLEEP 8 DUAL SLEEPI/II SIZE LIST/FLOF DUAL I/II LOCATE LIST/FLOF CANCELLOCATE SIZE -/--CANCEL -/-- To assign a programme number to a channel, select the Program by pressingP.SIZE the P▼ P.SIZE or P▲ button. PIP PIP SUBPAGE SUBPAGE TTX/MIX Press the - or + button to find the TTX/MIX correct number. ON Colour system Sound system Search Channel Program Store S.STD Power P.STD 5 Channel Colour system Sound system Search Channel Program Store DISPLAY PC STILL The options available in theDISPLAY ChannelSTILL group are displayed. Press the P.STD - or P.STD + button. Channel AUTO BG 471MHz C4 P1 ? TV/VIDEO TV/VIDEO PC 3 Result: Colour system Sound system Search Channel Program Store DISPLAY PC Press the P▼ or P▲ button to select the Channel. Result: Channel Colour system Sound system Search Channel Program Store P.STD TV/VIDEO P.STD TV/VIDEO PC Press the MENU button. 9 EXIT PRE-CH AUTO AUTO ON Press the P▼ or P▲ button toSIZE select the Store.LOCATE SIZE LOCATE SLEEP SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL Select the OK by pressing the - or + button.DUAL Result: 10 PRE-CH The programme PRE-CH PRE-CH number are -/-- channel -/-- and associated MUTE MUTE EXIT P.SIZE EXIT P.SIZE PIP SUBPAGE SUBPAGE stored. ON -/-Repeat Steps 7 to TTX/MIX 9 for each channel toAUTO be stored. TTX/MIX AUTO MUTE -/-EXIT SIZEEXIT LOCATE SIZE MUTE SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX CANCEL P.SIZE P.SIZE SUBPAGE SUBPAGE PIP PIP SLEEP TTX/MIX PIP ON PRE-CH LOCATE AUTO English-18 ON -/-- -/-- DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON SIZE PRE-CH SIZE PRE-CH LOCATE LOCATEP.SIZE P.SIZE PIP SUBPAGE SUBPAGE ON TTX/MIX TTX/MIX -/-- -/-AUTO AUTO PRE-CH PRE-CH SIZE SIZE LOCATE BN68-00438D-02_en 6/11/03 7:11 PM Page 19 Giving Channels Names Power Power If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. YouTV/VIDEO can names or assign new TV/VIDEO PC however DISPLAY PC change DISPLAY STILLthese STILL Power Power names as required. 1 2 P.STD TV/VIDEO P.STD TV/VIDEO PC S.STD DISPLAY STILL S.STD STILL Result: P.STDThe main P.STD menu is displayed. S.STD S.STD Press the MENU button. Power DISPLAY PC Power Press the P▼ or P▲ button to select the Channel. Result: The options available in the Channel group are displayed. TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL S.STD S.STD 3 Press the Power - or Power + button. 4 Press the P▼ or P▲ button to select the Name. PC DISPLAY PC DISPLAY STILL STILL Press theTV/VIDEO - orTV/VIDEO + button. P.STD Result: 5 Channel Auto store Manual store Name Add/Erase Fine tune Channel sort P.STD Channel P1 P2 P3 P4 ----------------- P1 P2 P3 P4 A---------------- The current channels are displayed. P.STD MUTE P.STD MUTE S.STD EXIT S.STD EXIT If necessary, select the channel to be assigned to a new name by pressing the P▼ or P▲ button. MUTE MUTE EXIT EXIT 6 Press the 7 Press the P▼ or P▲ button to select a letter (A~Z), a number(0~9) or a symbol (-, space). Move on the previous or next letter by pressing the - or + button. 8 Repeat Steps 5 to 7 for each channel to be assigned to a new name. - or + button. MUTE MUTE -/-- -/-- EXIT PRE-CH MUTE MUTE -/--/-TTX/MIX TTX/MIX Channel EXIT PRE-CH EXIT EXIT PRE-CH AUTO PRE-CH AUTO SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO CANCEL AUTO P.SIZE SLEEP -/-- P.SIZEI/II LIST/FLOF PIP PIP SUBPAGE SUBPAGE DUAL SLEEP DUAL I/II LIST/FLOF CANCEL CANCEL PRE-CH PRE-CH -/-ON ON SIZE SIZE LOCATE LOCATE SUBPAGE SUBPAGE P.SIZE P.SIZE PIP PIP TTX/MIX TTX/MIX AUTO AUTO ON ON PRE-CH PRE-CH -/--/-SIZE SIZE LOCATE LOCATE SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL TTX/MIX P.SIZE TTX/MIX P.SIZE AUTO AUTO PIP SUBPAGE SUBPAGE PIP SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON CANCEL ON P.SIZE P.SIZE SIZE SIZE LOCATE LOCATE PIP SUBPAGE SUBPAGE SIZE PIP ON ON SIZE LOCATE LOCATE English-19 BN68-00438D-02_en 6/11/03 7:11 PM Page 20 Skipping Unwanted Channels Channel Auto store Manual store Name Add/Erase Fine tune Channel sort You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip Power are not Power displayed. All channels that you doPC not specifically choose to skip are displayed TV/VIDEO PC DISPLAY STILL STILL Power TV/VIDEO Power DISPLAY during scanning. 1 Channel P1 P2 P3 P4 Added Added Added Added 2 S.STD DISPLAY STILL S.STD STILL Result:Power The main Power P.STD P.STDmenu is displayed. S.STD S.STD DISPLAY PC Press the P▼ or P▲ button to select the Channel. TV/VIDEO TV/VIDEO PC PC DISPLAY STILL TheDISPLAY options available in STILL the Channel group are displayed. Result: 3 4 Channel P1 P2 P3 P4 P.STD TV/VIDEO P.STD TV/VIDEO PC Press the MENU button. Erased Added Added Added Press the P.STD P.STD - or + button. S.STD Press the P▼ or P▲ button to select the Add/Erase. Press the - or + button. Result: The stored channels are displayed. MUTE MUTE EXIT Press the P▼ or P▲ button to select the channel to add or erase. If necessary, select the Added or Erased by pressing the MUTE EXIT EXIT - or MUTE + button. 6 Repeat Step 5 for each channel to be added or erased. MUTE EXIT -/-- -/-- Fine Tuning Channel Reception -/-TTX/MIX Auto store Manual store Name Add/Erase Fine tune Channel sort Power EXIT PRE-CH PRE-CH PRE-CH AUTO PRE-CH AUTO Power If the reception is clear, you notI/IIhave to fine-tune SLEEP DUAL SLEEP I/II do LIST/FLOF DUAL LIST/FLOF CANCEL CANCEL TTX/MIX TTX/MIX AUTO AUTO the channel, as this is done automatically during the search and store operation. If however theTV/VIDEO signal TV/VIDEO is weak orDISPLAY distorted, you may PC PC DISPLAY STILL STILLhave to fine-tune PRE-CH -/--/-SUBPAGE SUBPAGE P.SIZE P.SIZEI/II PRE-CH PIP PIP SLEEP DUAL SLEEP LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL the channel manually. 1 TTX/MIX P.STD TTX/MIX P.SIZE SLEEP 2 + 1 3 ON S.STD SIZE SIZE LOCATE AUTO AUTO PIP SUBPAGE SUBPAGE Power P.STD P.SIZE Press the MENU button. TV/VIDEO TV/VIDEO PC Result: English-20 -/-TTX/MIX Power Fine tune EXIT 5 MUTE Channel S.STD ON S.STD LOCATE PIP ON DISPLAY PC DISPLAY STILL ONSTILL The main menu is displayed. DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL SIZE CANCEL SIZE LOCATE LOCATE Press the P▼ or P▲P.STD button to select the Channel. P.STD S.STD S.STD P.SIZE PIP PIP Channel group are displayed. Result:P.SIZE TheSUBPAGE options SUBPAGE available in the ON ON Press the - or SIZE + button. SIZE LOCATE LOCATE 4 Press the P▼ or P▲ button to select the Fine tune. 5 Obtain a sharp and clear picture and good sound quality by pressingMUTE the - or + button. EXIT MUTE EXIT MUTE -/-- TTX/MIX MUTE -/-- TTX/MIX EXIT EXIT PRE-CH PRE-CH AUTO AUTO BN68-00438D-02_en 6/11/03 7:11 PM Page 21 Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Power Power order in which the channels have been ◆ Modify the numeric automatically stored. ◆ Give easily remembered numbers to the channels that you TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL Power TV/VIDEO Power watch most often. 1 2 P.STD TV/VIDEO P.STD TV/VIDEO PC S.STD DISPLAY STILL S.STD STILL Result: P.STD The main menu is displayed. Power Power P.STD S.STD S.STD Press the MENU button. DISPLAY PC Press the P▼ or P▲ button to select the Channel. TV/VIDEO PC DISPLAY PC DISPLAY STILL Result: TV/VIDEO The options available in the ChannelSTILL group are displayed. Power 3 4 Channel From To Store P1 ----P-? From To Store P1 P3 ? From To Store P3 P1 OK Power Press the P.STD- or P.STD+ button. TV/VIDEO TV/VIDEO PC DISPLAY PC S.STD S.STD DISPLAY STILL STILL Press the P▼ or P▲ button to select the Channel sort. Press the Power - or Power + button. Result: P.STD P.STDavailable in the S.STD The options ChannelS.STD sort group are MUTE MUTE TV/VIDEO TV/VIDEO PC PC isEXIT DISPLAY STILL EXIT STILL displayed with theDISPLAY From selected. 5 Select the channel number that you wish to change by P.STD MUTE P.STD + button repeatedly. S.STD EXIT S.STD EXIT pressingMUTE the - or 6 Press the P▼ or P▲ button to select the To. Select the new number by which you wish to identify the channel by pressing the - or + button repeatedly. 7 Press the P▼ or P▲ button to select the Store. Select the OK to confirm the exchange of channel numbers by -/-pressing the --/-or + button.PRE-CH PRE-CH MUTE Result: 8 Channel Auto store Manual store Name Add/Erase Fine tune Channel sort MUTE EXIT Channel --------- EXIT MUTE MUTE channel is exchanged EXIT EXITthe one The selected with Channel --------- chosen PRE-CH -/--previously -/-- stored to thePRE-CH TTX/MIX TTX/MIX AUTO number. AUTO For all the channels to move to the required channel numbers, MUTE 7 MUTE EXIT pressing EXIT the P▼ or P▲ repeat steps after select From SLEEP 5 to DUAL SLEEP I/II LIST/FLOF DUAL I/IItheLIST/FLOF CANCEL TTX/MIX TTX/MIX AUTO by CANCEL AUTO button. PRE-CH PIP PRE-CH -/-- SUBPAGE SUBPAGE P.SIZE-/-- DUAL P.SIZEI/II PIP SLEEP SLEEP LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL ON ON SIZE SIZE LOCATE TTX/MIX P.SIZE TTX/MIXSUBPAGE P.SIZE PIPAUTO LOCATE PIPAUTO SUBPAGE PRE-CH PRE-CH -/--/-ON ON SLEEP TTX/MIX -/-P.SIZE SLEEP TTX/MIX DUAL SLEEPI/II SIZE LIST/FLOF DUAL I/II LOCATE LIST/FLOF CANCELLOCATE CANCEL SIZE AUTO AUTO PRE-CH PRE-CH PIP PIP SUBPAGE SUBPAGE TTX/MIX -/-P.SIZE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON AUTO SIZE SIZE LOCATE TTX/MIX PIP SUBPAGE SUBPAGE CANCEL ON AUTO LOCATE P.SIZE P.SIZE SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON CANCEL ON SIZE LOCATE P.SIZE P.SIZE SIZE LOCATE PIP SUBPAGE SUBPAGE SIZE PIP PIP ON ON SIZE LOCATE LOCATE English-21 BN68-00438D-02_en 6/11/03 7:11 PM Page 22 Changing the Picture Standard Power Power TV/VIDEO TV/VIDEO PC Picture Mode Custom Brightness Contrast Sharpness Colour Tint Colour tone Standard Power TV/VIDEO PC DISPLAY P.STD DISPLAY STILL STILL Power Power TV/VIDEO TV/VIDEO PC 1 Press the MENU button. The main menu is displayed. Result: P.STD P.STD Press the P▼ or P▲ button to select the Picture. The options available in the Picture group are displayed. Result: 3 Press the - or + button. The Mode is selected. Result: 4 Select the required picture effect by pressing the - or + button repeatedly. The following picture effects are available: DynamicMUTE - Standard MUTE - Movie - Custom. EXIT EXIT ➣ P You can also set these options simply by pressing the P.STD (Picture Standard) button. MUTE ➣ MUTE EXIT SLEEP PRE-CH -/-- Power Power Adjusting the Picture Settings TTX/MIX TTX/MIX AUTO PRE-CH TTX/MIX TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL SLEEP SLEEP I/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL Power DUAL Power AUTO DUAL I/II LIST/FLOF CANCEL Picture P.SIZE PIP SUBPAGE Mode Custom ON Brightness Contrast SIZE LOCATE Sharpness Colour Tint Colour tone Standard Brightness Picture 1 P.SIZE P.SIZE PIP SUBPAGE SUBPAGE TV/VIDEO PC DISPLAY PC DISPLAY STILL Power TV/VIDEO Power ON Press the MENU button. menu SIZE is displayed. Result: P.STDThe main SIZE LOCATE P.STD S.STD TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL S.STD S.ST EXIT EXIT PRE-CH AUTO-/-STILL CANCEL TTX/MIX -/-- TTX/MIX PRE-CH PRE-CH AUTO AUTO PIP STILL SLEEP ON DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL LOCATE S.STD P.SIZE Power P.SIZE Power STILL PIP SUBPAGE SUBPAGE CANCE PIP 2 ON Press the P▼ or P▲ button to select the Picture. Picture group are Result: P.STDThe options SIZE STILL LOCATE LOCAT P.STD available in the S.STD S.STD TV/VIDEO TV/VIDEO PC displayed. DISPLAY PC SIZE DISPLAY STILL 3 Press the 4 Select the option (Brightness, Contrast, Sharpness, Colour or Tint) to be adjusted by pressing the P▼ or P▲ button. Press the - or + button. bar is displayed. Result: MUTEThe horizontal MUTE EXIT EXIT 5 Press the 6 Press the P▼ or P▲ the Colour MUTE MUTEbutton to select EXIT EXIT tone. Select the required option by pressing the the - or repeatedly. The following options are available: Cool 2 MUTE - Cool 1MUTE - Normal - WarmEXIT 1 - Warm EXIT2 ON - or + button. P.STD ➣ English-22 STIL Your set has several you to control picture quality. P.STD settings P.STD which allowS.STD S.STD 50 Mode Custom Brightness Contrast Sharpness Colour Tint Colour tone Standard MUTE DISPLAY STILL On the Picture menu, if you change the Brightness, Contrast, Sharpness, Colour or Tint (NTSC only) settings, the Custom is selected automatically. -/-- -/-- DISPLAY PC 2 STILL S.STD DISPLAY PC You can select the type of picture which best corresponds to your viewing requirements. P.STD P.STD S.STD S.STD - or P.STD TTX/MIX -/-- TTX/MIX -/-- SLEEP -/-TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL PRE-CH -/-TTX/MIX AUTO PRE-CH AUTO P.SIZE SLEEP TTX/MIX P.SIZE PIP SUBPAGE SUBPAGE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO ON P.SIZE S.STD EXIT EXIT + button to reach the required setting. + button MUTE MUTE If you make any changes to these settings, the picture standard is automatically switched to Custom. PRE-CH PRE-CH -/--/-- P.SIZE S.STD AUTO PRE-CH AUTO PRE-CH PIP -/-CANCEL AUTO ON -/-- SIZE SIZE LOCATE LOCATE PIP PIP SUBPAGE SUBPAGE TTX/MIX TTX/MIX PRE-CH PRE-CH AUTO AUTO BN68-00438D-02_en 6/11/03 7:11 PM TV/VIDEO Page 23 PC DISPLAY STILL P.STD S.STD MUTE EXIT Selecting the Picture Format Power Power TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL Power Power You can select the picture format which best corresponds to your viewing requirements. P.STD P.STD S.STD S.STD TV/VIDEO TV/VIDEO PC 1 2 Press the MENU button. The main menu is displayed. Result: P.STD Function DISPLAY PC P.STD DISPLAY STILL S.STD Sleep timer PIP STILL Size Language Off Normal English S.STD PRE-CH -/-- Press the P▼ or P▲ button to select the Function. The options available in the Function group are displayed. Result: TTX/MIX 3 Press the SLEEP DUAL I/II LIST/FLOF 4 Press the P▼ or P▲ button to select the Size. P.SIZE SUBPAGE PIP 5 Select the required picture format by pressing the button repeatedly. SIZE LOCATE - or + button. AUTO CANCEL ON ➣ MUTE MUTE EXIT - or EXIT You can also select these options simply by pressing the P.SIZE (Picture Size) button. MUTE Normal -/-- Normal + TTX/MIX MUTE EXIT Wide PRE-CH -/-- TTX/MIX Zoom PRE-CH AUTO WideAUTO -/-- PRE-CH -/-- Sets the picture normal Sets the picture to 16:9 wide SLEEPto 4:3 DUAL SLEEP I/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL mode. This is a standard TV mode. TTX/MIX TTX/MIX screen size. P.SIZE EXIT P.SIZE PIP SUBPAGE SUBPAGE ON SIZE SIZE LOCATE PIP SLEEP ON LOCATE P.SIZE PRE-CH Magnifies the size of the AUTO pictureAUTO on screen. DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL P.SIZE Zoom PIP SUBPAGE SUBPAGE SIZE CANCEL PIP ON ON SIZE LOCATE LOCATE Freezing the Current Picture ➣ Not Available in PC mode. Press the “STILL” button on the remote control to freeze the picture on a given frame. To return to normal viewing, press the “STILL” button again. Power TV/VIDEO PC DISPLAY P.STD STILL S.STD English-23 MUTE -/-- EXIT PRE-CH BN68-00438D-02_en 6/11/03 7:12 PM Page 24 Changing the Sound Standard Power You can selectTV/VIDEO the type of special sound effect toSTILL be used when TV/VIDEO PC DISPLAY PC DISPLAY STILL Power Power watching a given broadcast. Sound Mode Bass Treble Dolby Power Custom P.STD : Off 1 P.STD S.STD S.STD TV/VIDEO TV/VIDEO PC Press the MENU button. Result: TV/VIDEO PC DISPLAY P.STD STILL 3 4 Press the - or S.STD EXIT EXIT + button. Select the required sound effect by pressing the - or + button repeatedly. The following sound effects are available: MUTE EXIT EXIT Custom - Standard - Music - Movie - Speech. ➣ MUTE You can also set these options simply by pressing the S.STD (Sound Standard) button. MUTE MUTE EXIT -/-- PRE-CH -/-- Adjusting the Sound Settings PRE-CH PRE-CH -/-- Power TTX/MIX SLEEP S.STD The Mode is selected. MUTE P P.STD The options available in the Sound group are displayed. Result: S.STD STILL Press the P▼ or P▲ button to select the Sound. Result: Power DISPLAY STILL The main menu is displayed. P.STD 2 DISPLAY PC TTX/MIX AUTO DUAL I/II LIST/FLOF CANCEL Sound P.SIZE Mode Bass Treble Dolby Power TTX/MIX AUTO TV/VIDEO TV/VIDEO PC AUTO -/-- TTX/MIX P.STD ON : LOCATE TTX/MIX 2 Press the P▼ or P▲ button to select the Sound. SIZE 3 Press the 4 Select the option (Bass or Treble) to be adjusted by pressing the P▼ or P▲ button. Press the - or + button. - or + button. 51 Result: 5 AUTO AUTO TV/VIDEOS.STD TV/VIDEO PC S.STD DISPLAY PC DISPLAY STILL STILL PIP SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON ON Result: The main menu is displayed. P.STD P.STD S.STD S.STD SIZE SIZE LOCATE LOCATE TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL P.SIZE P.SIZE PIP SUBPAGE SUBPAGE P.SIZE PIP Power Power Press the MENU P.SIZE button. SUBPAGE SUBPAGE Result: P.STDThe options SoundS.STD group are displayed. P.STD available in the S.STD Bass PRE-CH P.STD 1 Off PRE-CH DISPLAY PC Power DISPLAY STILL PowerSTILL SLEEPcanDUAL SLEEP I/II LIST/FLOF DUAL I/IIto LIST/FLOF CANCEL The sound settings be adjusted suit your CANCEL personal preferences. PIP SUBPAGE Custom SIZE -/-- The horizontal bar is displayed. MUTE Press the MUTE - or EXIT MUTE ➣ EXIT + button to reach the required setting. MUTE EXIT EXIT If you make any changes to these settings, the sound standard is automatically switched to Custom. MUTE MUTE -/-- -/-- EXIT PRE-CH EXIT PRE-CH English-24 -/-- AUTO -/-- AUTO TTX/MIX TTX/MIX SLEEP -/-- DUAL SLEEPI/II LIST/FLOF DUAL TTX/MIX I/II LIST/FLOF CANCEL TTX/MIXCANCEL PRE-CH PRE-CH -/-- P.SIZE TTX/MIX P.SIZE TTX/MIX PRE-CH PRE-CH AUTO AUTO PIPDUAL SUBPAGE SUBPAGE SLEEP SLEEPI/II PIP LIST/FLOF DUAL I/II LIST/FLOF CANCEL AUTO AUTO ON ON CANCEL CANCE PIP ON ON SIZE LOCATE LOCAT BN68-00438D-02_en 6/11/03 7:12 PM Page 25 Enjoying the Dolby Sound Power Power This feature provides a home theater-like Dolby STILL effect by mixing the TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL left and right speakers. Power 1 Power P.STD P.STD S.STD S.STD Press the MENU button. Sound Mode Bass Treble Dolby Custom : On TV/VIDEO TV/VIDEO PC TheDISPLAY PC menu DISPLAY STILL STILL Result: main is displayed. 2 Press the P▼ or P▲ button to select the Sound. P.STD P.STD S.STD S.STD Result: Power The options available in the Sound group are displayed. 3 Press the 4 Press the P▼ or P▲ button to select the Dolby. 5 For enjoying the Dolby sound effect, select the On by pressing the - orMUTE + button. MUTE EXIT EXIT MUTE - or MUTE + button. EXIT TV/VIDEO PC DISPLAY STILL P.STD S.STD MUTE EXIT EXIT Selecting the Sound Mode PRE-CH -/--/-You can set the sound mode by pressingPRE-CH the “DUALI/II” button. When you press it, current sound mode is displayed on the screen. TTX/MIX TTX/MIX AUTO Audio type PRE-CH PRE-CH -/-SLEEP SLEEPI/II LIST/FLOF DUAL I/II MONO LIST/FLOF CANCEL Mono DUAL Stereo TTX/MIX TTX/MIX FM P.SIZE P.SIZE Stereo Dual SLEEP P.SIZE NICAM Stereo ➣ AUTO CANCEL STEREO ↔ MONO AUTO AUTO PIP PIP SUBPAGE SUBPAGE DUAL 1 ↔ONDUAL 2ON DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL SIZE MONO SIZE LOCATE LOCATE Mono P.SIZE PIP PIPSTEREO StereoSUBPAGE SUBPAGE MONO ↔ ON ON Dual SIZE → MONO → DUAL 1 SIZE LOCATE LOCATE DUAL 2 → -/-- DUAL 1/2 Default Automatic change PRE-CH -/-- TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE ON DUAL 1 Automatic change DUAL 1 ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO. ◆ If the stereo signal is weak and an automatic switching occurs, then switch to the MONO. English-25 BN68-00438D-03eng 8/18/03 2:47 PM Page 26 Viewing the Picture In Picture (PIP) Function Sleep timer PIP Size Language Off Normal English Power within the main picture of PC MODE. You can displayPower a sub picture In this way you can watch TV program or external A/V device such as VCR or DVD (to video_1, watching PC Mode. TV/VIDEO TV/VIDEO PCvideo_2, DISPLAY PC S-video), DISPLAY STILLwhileSTILL Power Power 1 P.STD P.STD S.STD Press the MENU button. TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL Power Result: 2 Function PIP : TV/Video Size Locate On TV Small The main menu is displayed. P.STD Result: : TV/Video Size Locate Press the 4 Press the P▼ or P▲ button to select the PIP. Press the - or + button. 5 - or DISPLAY P.STD : TV/Video Size Locate On TV Small DISPLAY PC DISPLAY STILL STILL S.STD S.STD P.STD Power P.STD Power MUTE EXIT Select the On by pressing the EXIT - or + TV/VIDEO button. TV/VIDEO PC DISPLAY PC DISPLAY STILL You can also activate the PIP simply by pressing the PIP ON MUTE MUTE EXIT EXIT button. P.STD STILL S.STD S.STD EXIT EXIT Press the P▼ or P▲ button to select the TV/Video. MUTEby pressing MUTE the EXIT Select a source of the sub picture - or EXIT+ button. Result: The sources are displayed in the following order: TV Power Power - VIDEO1 - VIDEO2 - S-VIDEO S.STD PIP S.STD The options available in the PIP group are displayed. P.STD STILL Function STILL + button. TV/VIDEO TV/VIDEO PC ➣ On TV Small 6 PC S.STD 3 Power TV/VIDEO S.STD The options available in the Function group are displayed. Power Power P.STD P.STD S.STD MUTE PIP P.STD Press the P▼ or P▲ buttonTV/VIDEO to selectTV/VIDEO the PC Function. DISPLAY PC DISPLAY STILL Result: Function S.STD STILL Power 7 -/-- PRE-CH -/-- PRE-CH Press the P▼ or P▲ button to select the Size. MUTE MUTE SelectTV/VIDEO a PC size of DISPLAY the the - or + button. TV/VIDEO PC sub picture DISPLAY STILL by pressing STILL PRE-CH -/--The TTX/MIX -/-- are displayedPRE-CH AUTO AUTO order: Result: TTX/MIX sizes in the following P.STD Small - Medium S.STD S.STD - Large P.STD ➣ MUTE EXIT SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO TTX/MIX Function PIP : TV/Video Size Locate On TV Small 8 TTX/MIX ON ON AUTO ➣ AUTO MUTE SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE MUTE EXIT EXIT -/-SLEEP SIZE AUTO AUTO ON PRE-CH CANCEL PRE-CH -/-SLEEP DUAL LIST/FLOF I/II LIST/FLOF CANCEL SIZEI/II DUAL LOCATE LOCATE CANCEL P.SIZE P.SIZE TTX/MIX TTX/MIX PIP PIP SUBPAGE SUBPAGE AUTO ON SIZE EXIT AUTO You can also move the by pressing the SIZEsub picture SIZE simply LOCATE LOCATE P.SIZE P.SIZE TTX/MIX PIP PIP SUBPAGETTX/MIX SUBPAGE LOCATE button. ON TTX/MIX EXIT Press the P▼ or P▲ button to select the Locate. SIZE SUBPAGE SIZE LOCATE LOCATE P.SIZE P.SIZE counterclockwise PIPby pressing PIP SUBPAGE Move the sub picture PRE-CH PRE-CH -/-- the -/-SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL - or + button. ON ON PRE-CH -/-- CANCEL AUTO PRE-CH -/--these options -/-◆ You can also select simply byMUTE pressingPRE-CH MUTE the SIZE button. P.SIZE P.SIZEI/II LIST/FLOF PIP PIP SUBPAGE SUBPAGE ◆ Not Available in PCI/II mode. SLEEP DUAL SLEEP DUAL LIST/FLOF CANCEL CANCEL ON PIP AUTO ON LOCATE SLEEP SIZEI/II LIST/FLOF SIZE LOCATE SLEEP DUAL I/II DUAL LIST/FLOF CANCEL LOCATE CANCEL P.SIZE P.SIZE PIP SUBPAGE SUBPAGE ON -/-- -/-- PRE-CH PRE-CH AUTO AUTO English-26 TTX/MIX TTX/MIX SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL P.SIZE P.SIZE PIP SUBPAGE SUBPAGE SIZE CANCEL PIP ON ON SIZE LOCATE LOCATE SIZE PIP ON SIZE LOCATE LOCATE BN68-00438D-02_en 6/11/03 7:12 PM Power Page 27 TV/VIDEO PC DISPLAY P.STD STILL S.STD Switching Off Automatically Power Power You can select a time period of between 10 and 240 minutes after your set automatically switches off. TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL Power 1 Power P.STD Press the MENU P.STD button. S.STD S.STD Result: TV/VIDEO The main menu isDISPLAY displayed. TV/VIDEO PC PC DISPLAY STILL 2 Result: 3 4 S.STD - or + button. The Sleep timer is selected. PRE-CH -/-- TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE PIP SIZE LOCATE MUTE CANCEL DISPLAY STILL ON Select the number of minutes after which your set switches off by pressing the - or + button repeatedly. MUTE Normal English S.STD The options available in the Function group are displayed. Press the Result: P.STD EXIT Off STILL Press the P▼ or P▲ button to select the Function. P.STD Function MUTE Sleep timer PIP Size Language EXIT EXIT ◆ The preset time intervals: 10, 20, 30, 60, 90, 120, 150, 180, 210, and 240 minutes. ➣ MUTE MUTE EXIT EXIT You can also select simply by pressing the “SLEEP” button. If the sleep timer is already set, the screen displays the remaining time and then your set will be switched off. If the sleep timer is not yet set, displays Off. -/-- TTX/MIX -/-- -/-- TTX/MIX PRE-CH PRE-CH AUTO AUTO PRE-CH -/-- SLEEP DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL P.SIZE P.SIZE Displaying Information TTX/MIX TTX/MIX SLEEP PRE-CH CANCEL AUTO PIP SUBPAGE SUBPAGE AUTO PIP ON ON DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL SIZE SIZE LOCATE LOCATE You can view the setting status of selected source by pressing the “DISPLAY” button on theP.SIZE remoteSUBPAGE control. The information P.SIZE PIP displayed PIP SUBPAGE are different depending on the selected source. ON ON SIZE SIZE LOCATE LOCATE Power TV/VIDEO PC P.STD S.STD MUTE EXIT English-27 PRE-CH -/-- TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE ON BN68-00438D-02_en 6/11/03 7:12 PM Page 28 Setting up Your PC Software (Based on Widows 2000) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1 First, click on “Settings” on the Windows start menu. While “Settings” is highlighted, move the cursor so that “Control Panel” is highlighted. 2 When the control panel screen appears, click on “Display” and a display dialog-box will appear. 3 Navigate to the “Settings” tab on the display dialog-box. The correct setting of size (resolution) - 15” : 1024 x 768 pixels - 17” : 1280 x 1024 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. English-28 BN68-00438D-02_en 6/11/03 7:12 PM Power Page 29 Power Adjusting the Brightness and Contrast ➣ 1 Preset to the PC mode by the PC DISPLAY button. TV/VIDEO TV/VIDEO PCpressing DISPLAY PC STILL Power Power P.STD S.STD S.STD STILL TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL Press the MENU button. Result: The main menu is displayed. Power P.STD 2 P.STD STILL Power P.STD S.STD S.STD Press the P▼ or P▲ button to select the PC. Result:TV/VIDEO TheTV/VIDEO options inDISPLAY the PC group PC available DISPLAY PC STILL STILLare displayed. Power 3 Press the Power - or + button. P.STD P.STD S.STD Result:TV/VIDEO TheTV/VIDEO Image PC is selected. DISPLAY PC DISPLAY STILL 4 Press the - or S.STD STILL + button again. P.STD P.STD S.STD S.STD Result: MUTEThe options group are displayed. MUTE available in the EXITImageEXIT 5 PC Image Brightness Contrast Select the option (Brightness or Contrast) to be adjusted for the color of your computer image by pressing the P▼ or P▲ button. MUTE - or MUTE + button. EXIT EXIT Press the Result: 6 PC Image Image lock Position Colour adjust Recall Auto adjustment 1024x768 48.2kHz 59.8Hz The horizontal bar is displayed. Press the - or + button to reach the required setting. MUTE MUTE EXIT -/-- -/-- MUTE MUTE TTX/MIX -/-- TTX/MIX -/-- SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO P.SIZE -/-SLEEP P.SIZE PIP PIP SUBPAGE SUBPAGE PRE-CH PRE-CH -/-DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL ON ON TTX/MIX P.SIZE -/-- TTX/MIX P.SIZE -/-- SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL CANCEL SIZEI/II LIST/FLOF SIZE LOCATE TTX/MIX AUTO CANCEL LOCATE AUTO P.SIZE SLEEP P.SIZE PIP SUBPAGE SUBPAGE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON PIP CANCEL ON P.SIZE P.SIZE SIZE SIZE LOCATE PIP SUBPAGE SUBPAGE LOCATE PIP PRE-CH EXIT AUTO PRE-CH Brightness 90 EXIT PRE-CH EXIT AUTO PRE-CH CANCEL AUTO SIZE SIZE LOCATE LOCATE AUTO AUTO PIP PIP SUBPAGE SUBPAGE PRE-CH PRE-CH ON ON SIZE ON ON SIZE LOCATE LOCATE English-29 BN68-00438D-02_en 6/11/03 7:12 PM Page 30 Adjusting the Image Quality ➣ PC Image Image lock Position Colour adjust Recall Auto adjustment 1024x768 48.2kHz 59.8Hz Preset to the PC mode by pressing the PC button. Power Power This feature isTV/VIDEO used to fine tuneDISPLAY and getDISPLAY the best STILL image by removing PC PC STILL Power TV/VIDEO Power noises that create unstable images with jitters and shimmers. 1 2 P.STD TV/VIDEO P.STD TV/VIDEO PC S.STD DISPLAY STILL S.STD STILL Result: P.STDThe main P.STD menu is displayed. S.STD S.STD Press the MENU button. Power Power Press the P▼ or P▲ button to select the PC. Result: The options available in the PC group are displayed. TV/VIDEO TV/VIDEO PC PC Image lock Coarse Fine DISPLAY PC Power Power P.STD P.STD DISPLAY PC DISPLAY STILL STILL S.STD S.STD 3 Press the 4 Press the P▼ orTV/VIDEO P▲ to the ImageSTILL Lock. TV/VIDEO PCbutton DISPLAY PC select DISPLAY STILL Press the - or + button. - or + button. Result: P.STDThe options ImageS.STD Lock group are P.STD available in the S.STD MUTEdisplayed. MUTE EXIT EXIT 5 Coarse 1344 Select the option (Coarse or Fine) to be adjusted for the quality of MUTE image MUTE by pressing theEXIT EXITbutton. your computer P▼ or P▲ Press the - or + button. Result: 6 The horizontal bar is displayed. Press the MUTE ➣ - or + button to reach the required setting. MUTE EXIT MUTE -/-TTX/MIX MUTE -/-TTX/MIX EXIT PRE-CH AUTO SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO P.SIZE SLEEP -/-- P.SIZEI/II LIST/FLOF PIP PIP SUBPAGE SUBPAGE DUAL SLEEP DUAL I/II LIST/FLOF CANCEL CANCEL PRE-CH PRE-CH -/-ON ON P.SIZE TTX/MIX -/-- P.SIZE TTX/MIX -/-- EXIT PRE-CH AUTO SLEEP TTX/MIX SIZE SIZE LOCATE LOCATE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL TTX/MIX AUTO AUTO CANCEL AUTO SIZE SUBPAGE SIZE LOCATE LOCATE PIP PIP SUBPAGE AUTO AUTO ON ON PRE-CH PRE-CH P.SIZE SLEEP P.SIZE PIP SUBPAGE SUBPAGE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON PIP CANCEL ON P.SIZE P.SIZE SIZE SIZE LOCATE PIP SUBPAGE SUBPAGE LOCATE PIP SIZE English-30 EXIT This feature may width ofPRE-CH the image. -/--/-- change the PRE-CH If necessary, adjust the position to center. ON ON SIZE LOCATE LOCATE BN68-00438D-02_en 6/11/03 7:12 PM Power Page 31 Power Changing the Image Position ➣ 1 Preset to the PC mode by the PC DISPLAY button. TV/VIDEO TV/VIDEO PCpressing DISPLAY PC STILL Power Power P.STD TV/VIDEO P.STD TV/VIDEO PC Press the MENUPower button. Power DISPLAY PC S.STD DISPLAY STILL Result: P.STDThe main P.STD menu is displayed. S.STD 2 STILL S.STD STILL S.STD TV/VIDEO PC button DISPLAY PC DISPLAY STILL Press the P▼ orTV/VIDEO P▲ to select the PC. STILL Power Power Result: The options available in the PC group are displayed. P.STD P.STD TV/VIDEO TV/VIDEO PC S.STD DISPLAY PC DISPLAY STILL + button. S.STD STILL 3 Press the 4 Press theP.STD P▼ or P▲ the Position.. P.STDbutton to select S.STD S.STD Press the - or + button. 5 - or Select the position (H-Position or V-Position) MUTE MUTE EXIT EXIT to be adjusted by pressing the P▼ or P▲ button. Press the - or + button. MUTE EXIT Result: MUTEThe horizontal bar is displayed. 6 Press the MUTE - or PC Image Image lock Position Colour adjust Recall Auto adjustment 1024x768 48.2kHz 59.8Hz PC Position H-Position V-Position EXIT + button to reach the required setting. MUTE EXIT EXIT H-Position 50 MUTE -/-- MUTE -/-- EXIT PRE-CH EXIT PRE-CH -/-TTX/MIX -/-TTX/MIX PRE-CH AUTO PRE-CH AUTO SLEEP TTX/MIX -/-- DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL TTX/MIX AUTO AUTO PRE-CH PRE-CH -/-- P.SIZE SLEEP P.SIZEI/II LIST/FLOF PIP PIP SUBPAGE SUBPAGE DUAL SLEEP DUAL I/II LIST/FLOF CANCEL CANCEL ON ON TTX/MIX AUTO AUTO PRE-CH PRE-CH -/-SIZE SUBPAGE SIZE LOCATE LOCATE P.SIZE PIP PIP SUBPAGE TTX/MIX -/-P.SIZE SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL ON ON TTX/MIX AUTO AUTO SIZE SIZE LOCATE LOCATE P.SIZE SLEEP P.SIZE PIP SUBPAGE SUBPAGE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON PIP CANCEL ON P.SIZE P.SIZE SIZE SIZE LOCATE PIP SUBPAGE SUBPAGE LOCATE PIP SIZE ON ON SIZE LOCATE LOCATE English-31 BN68-00438D-02_en 6/11/03 7:12 PM Page 32 Power Adjusting the Color ➣ PC Image Image lock Position Colour adjust Recall Auto adjustment 1024x768 48.2kHz 59.8Hz PC Mode Red Green Blue 2 TV/VIDEO TV/VIDEO PCpressing DISPLAY PC STILL Preset to the PC mode by the PC DISPLAY button. Power Power P.STD TV/VIDEO P.STD TV/VIDEO PC STILL S.STD DISPLAY STILL S.STD STILL Result: P.STDThe main P.STDmenu is displayed. S.STD S.STD Press the MENU button. DISPLAY PC Power Power Press the P▼ or P▲ button to select the PC. TV/VIDEO TV/VIDEO PC Result: DISPLAY PC P.STD P.STD Press the 4 Press the P▼ or P▲ button to select the Colour adjust. Press the - or + button. STILL - or Power + button. S.STD S.STD EXIT EXIT Power TV/VIDEO TV/VIDEO PC DISPLAY PC DISPLAY STILL STILL S.STD S.STD Power available in the Colour adjust group are Result: Power The options MUTEdisplayed MUTEwith the Mode isEXIT selected.EXIT P.STD TV/VIDEO TV/VIDEO PC DISPLAY PC by pressing DISPLAY STILL the STILL - or Select the required color mode MUTEThe following MUTE EXIT EXIT repeatedly. color modes are available: Custom ColourP.STD 1 - Colour 2 - S.STD Colour S.STD 3. P.STD 6 If you wish adjust the color which best corresponds to your viewing requirements, select the option (Red, Green, orMUTE Blue) to be adjusted MUTE by pressing the P▼ or P▲ button. Press the - or + button. Custom Result: 50 + button The horizontal bar is displayed. PRE-CH PRE-CH -/--/-- Press the ➣ Red P.STD 5 7 - or -/-TTX/MIX MUTE + button to reach the required setting. PRE-CH AUTO EXIT -/-TTX/MIX MUTE PRE-CH AUTO EXIT If you change the Red, Green, or Blue settings, the Mode is SLEEP DUAL SLEEPI/II automatically. LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL TTX/MIX TTX/MIX AUTO AUTO selected to Custom MUTE P.SIZE SLEEP P.SIZE MUTE EXIT -/-- EXIT -/-- P.SIZEI/II LIST/FLOF PIP PIP SUBPAGE SUBPAGE DUAL SLEEP DUAL I/II LIST/FLOF CANCEL CANCEL ON ON TTX/MIX SIZE SUBPAGE SIZE LOCATE LOCATE P.SIZE PIP PIP SUBPAGE ON -/-- SIZE SIZE LOCATE PRE-CH ON SLEEP LOCATE PRE-CH P.SIZE TTX/MIX -/-- TTX/MIX -/-- AUTO PRE-CH -/-- TTX/MIX P.SIZE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO CANCEL AUTO P.SIZE SLEEP P.SIZE PIP SUBPAGE SUBPAGE DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL ON PIP CANCEL ON P.SIZE P.SIZE SIZE SIZE LOCATE PIP SUBPAGE SUBPAGE LOCATE PIP SIZE ON ON SIZE LOCATE LOCATE PRE-CH AUTO AUTO PIP SUBPAGE SUBPAGE AUTO PRE-CH SLEEP TTX/MIX PRE-CH DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL SIZE English-32 DISPLAY STILL The options available in the PC group are displayed. 3 Custom PC Mode Red Green Blue 1 Power CANCEL PIP ON ON SIZE LOCATE LOCATE BN68-00438D-02_en 6/11/03 7:12 PM Page 33 Initializing the Image Settings ➣ Power Power Preset to the PC mode by pressing the PC button. TV/VIDEO PC Power TV/VIDEO Power DISPLAY PC DISPLAY STILL STILL You can replace all image settings with the factory default values. 1 2 P.STD TV/VIDEO P.STD TV/VIDEO PC S.STD DISPLAY STILL S.STD STILL Result: Power Power P.STDThe main P.STD menu is displayed. S.STD S.STD Press the MENU button. DISPLAY PC Press the P▼ or P▲ button to select the PC. PC Image Image lock Position Colour adjust Recall Auto adjustment 1024x768 48.2kHz 59.8Hz PC DISPLAY PC STILL STILL Result:TV/VIDEO TheTV/VIDEO options available inDISPLAY the PC group are displayed. 3 4 Press the P.STD - or P.STD + button. S.STD Press the P▼ or P▲ button to select the Recall. Press the - or + button. Result: Recall Image recall Colour recall The options available in the Recall group are displayed. MUTE 5 PC S.STD MUTE EXIT EXIT Select the option (Image recall or Colour recall) to be replaced by pressing the P▼ or P▲ button. MUTE - or MUTE + button. EXIT EXIT Press the Result: The screen becomes black and return to original view about a few seconds later. MUTE MUTE -/-- -/-- Power Power EXIT PRE-CH EXIT PRE-CH Adjusting the PC Screen Automatically ➣ PRE-CH -/--/-TTX/MIX TTX/MIX AUTO PRE-CH AUTO TV/VIDEO TV/VIDEO PCpressing DISPLAY PC STILL STILL Power Power Preset to the PC mode by the PC DISPLAY button. SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO P.STD TV/VIDEO P.STD S.STD TV/VIDEO PC DISPLAY PC DISPLAY STILL CANCEL AUTO S.STD STILL 1 Press the MENU button. 2 Press the P▼ orTTX/MIX P▲ button to select the PC.LOCATE SIZE SIZE LOCATE TTX/MIX AUTO AUTO P.SIZE P.SIZE PIP PIP SUBPAGE SUBPAGE PRE-CH PRE-CH -/--/-P.SIZE P.SIZE PIP PIP SUBPAGE SUBPAGE SLEEP DUAL SLEEP I/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL CANCEL Result: P.STDThe main P.STD menu is displayed. S.STD S.STD ON ON Result: ON PC group ON are displayed. The options available in the SLEEP DUAL SLEEPI/II LIST/FLOF DUAL CANCEL CANCEL SIZEI/II LIST/FLOF SIZE LOCATE LOCATE 3 Press the 4 Press the P▼ or P.SIZE P▲ button to select the adjustment. P.SIZE PIP Auto PIP SUBPAGE SUBPAGE Press the - or + button. ON ON Result: PC Image Image lock Position Colour adjust Recall Auto adjustment 1024x768 48.2kHz 59.9Hz - or + button. Auto adjustment Please wait The screen quality and position are automatically adjusted, SIZE SIZE LOCATE LOCATE MUTEand the MUTE EXIT EXITabout a few seconds screen returns to original view later. MUTE MUTE -/-- -/-- EXIT EXIT PRE-CH PRE-CH PRE-CH AUTO PRE-CH AUTO -/-TTX/MIX -/-TTX/MIX SLEEP TTX/MIX DUAL SLEEPI/II LIST/FLOF DUAL I/II LIST/FLOF CANCEL TTX/MIX AUTO P.SIZE SLEEP P.SIZEI/II LIST/FLOF PIP PIP SUBPAGE SUBPAGE DUAL SLEEP DUAL I/II LIST/FLOF CANCEL CANCEL ON ON P.SIZE P.SIZE SIZE SUBPAGE SIZE LOCATE PIP SUBPAGE ON CANCEL AUTO LOCATE PIP ON English-33 BN68-00438D-02_en 6/11/03 7:12 PM Page 34 Teletext Feature Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. ➣ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ◆ Entering the page number ◆ Selecting a title in a list ◆ Selecting a coloured heading (FASTEXT system) English-34 BN68-00438D-02_en 6/11/03 7:12 PM Page 35 Displaying the Teletext Information Power TV/VIDEO PC DISPLAY P.STD STILL S.STD You can display Teletext information at any time on your set. P ☛ For Teletext information to be displayed correctly, channel reception must be stable; otherwise: MENU P ◆ Information may be missing MUTE ◆ Some pages may not be displayed 1 2 Select the channel providing the Teletext service using the P▼ or P▲ button. Press the TTX/MIX button to activate the teletext mode. Result: 3 4 The contents page is displayed. It can be redisplayed at any time by pressing the (index) button. If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX button again. To return to normal viewing, press the CANCEL ( EXIT 1 2 3 4 5 6 7 8 9 PRE-CH -/-- 0 TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE PIP ON ) button. SIZE 5 CANCEL Press the EXIT button again to exit from the teletext display. English-35 LOCATE BN68-00438D-02_en 6/11/03 7:12 PM Page 36 Selecting a Page by Number Power TV/VIDEO PC DISPLAY P.STD STILL S.STD You can enter the page number directly by pressing the numeric buttons on the remote control. 1 P Power MENU TV/VIDEO PC DISPLAY P P.STD MUTE Result: STILL S.STD EXIT 1 2 3 4 5 6 7 8 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. 2 The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold) button. Press the (hold) button again to resume. 9 PRE-CH -/-- Using the various display options: 0 MUTE TTX/MIX EXIT AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE ON PRE-CH -/-- TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE ON English-36 To display... Press the... ◆ Hidden text (answers to quiz games, for example) (reveal) ◆ The normal screen (reveal) again ◆ A secondary page, by entering its 4-digit number SUBPAGE ( ) ◆ The next page (page up) ◆ The previous page (page down) ◆ Double-size letters in the: • Upper half of the screen • Lower half of the screen (size) • Once • Twice ◆ Normal screen • Three times BN68-00438D-02_en 6/11/03 7:12 PM Page 37 MUTE EXIT Using FLOF to Select a Page PRE-CH -/-- The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons on the remote control. 1 2 Display the teletext contents page by pressing the TTX/MIX button. Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line. Result: The page is displayed with other coloured information that can be selected in the same way. TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE PIP SIZE LOCATE ON Power TV/VIDEO PC DISPLAY P.STD 3 To display the previous or next page, press the corresponding coloured button. 4 To display the subpage, see the following steps. CANCEL STILL S.STD P ◆ Press the SUBPAGE ( Result: MENU ) button. P The available subpages appear. ◆ Select the required sub-page. Sub-pages can be scrolled by using the MUTE or EXIT button. Power TV/VIDEO PC DISPLAY P.STD S.STD PRE-CH -/-- Storing Teletext Pages TTX/MIX You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the LIST/FLOF ( Result: ➣ 2 ) button. Four 3-digit numbers are displayed in different colors. The LIST/FLOF ( ) button is used to switch between the LIST and FLOF modes. Press the colored button corresponding to the page that will be replaced. 3 Enter the new page number using the numeric buttons. 4 Repeat steps 2 and 3 for each page to be stored, using a different colored button each time. 5 Press the STILL AUTO SLEEP DUAL I/II LIST/FLOF P.SIZE SUBPAGE PIP SIZE ON EXIT LOCATE MUTE CANCEL 1 2 3 4 5 6 7 8 9 PRE-CH -/-0 TTX/MIX AUTO SLEEP DUAL I/II LIST/FLOF CANCEL P.SIZE SUBPAGE PIP SIZE LOCATE ON (store) button until the corresponding blocks blink. English-37 BN68-00438D-02_en 6/11/03 7:12 PM Page 38 Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer. No sound or picture ◆ ◆ ◆ ◆ Normal picture but no sound ◆ Check the volume. ◆ Check whether the MUTE button has been pressed on the remote control. No picture or black and white picture ◆ Adjust the color settings. ◆ Check that the broadcast system selected is correct. Sound and picture interference ◆ Try to identify the electrical appliance that is affecting the set and move it further away. ◆ Plug your set into a different mains socket. Blurred or snowy picture, distorted sound ◆ Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial. Remote control malfunctions ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check the battery terminals. “Check Signal Cable” message is displayed. ◆ Check that the signal cable is firmly connected to the PC or video sources. ◆ Check that the PC or video sources are turned on. On PC mode, “Not Supported Mode” message is displayed. ◆ Check the maximum resolution and the frequency of the video Adapter. ◆ Compare these values with the data in the Display Modes Timing Chart. On PC mode, horizontal or vertical bars appear to flicker, jitter or shimmer on the image. ◆ Adjust the Coarse or Fine function. On PC mode, screen is black and power indicator light is steady amber or blinks every 0.5 or 1 seconds. ◆ The TV is using its power management system. ◆ Move the computer’s mouse or press a key on the keyboard. English-38 Check that the mains lead has been connected to a wall socket. Check that you have pressed the Power ( ) button. Check the picture contrast and brightness settings. Check the volume. BN68-00438D-02_en 6/11/03 7:12 PM Page 39 Troubleshooting: Before Contacting Service Personnel On PC mode, image is not stable and may appear to vibrate. ◆ Check that the display resolution and frequency from your computer or video board is an available mode for your set. On your computer check: Control Panel, Display, Settings. ◆ If the setting is not correct, use your computer utility programme to change the display settings. ➣ On PC mode, image is not centered on the screen. Your set supports multiscan display functions within the following frequency domain: Horizontal frequency 15” : 30 ~ 69 kHz 17” : 30 ~ 81 kHz Vertical frequency - 56 ~ 75 Hz Maximum refresh rate - 15” : 1024 x 768 @ 75Hz 17” : 1280 x 1024 @ 75Hz ◆ Adjust the horizontal and vertical position. Power Saver This set has a built-in power management system called PowerSaver. This system saves energy by switching your set into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. Normal Operation Power-Saving Function mode (EPA/NUTEK) Horizontal Sync Active Inactive Vertical Sync Active Inactive Power Indicator Green Green, Blinking (1 sec interval) LW15E33C : 48W (Max.) LW17E34C : 58W (Max.) Less than 3W State Power Consumption ➣ This set automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard. English-39 BN68-00438D-02_en 6/11/03 7:12 PM Page 40 Technical and Environmental Specifications Model Panel Size Display Size Type Pixel Pitch Viewing Angle Frequency Horizontal Vertical Display Color Display Resolution Optimum Mode Maximum Mode LW15E33C 15” Diagonal 17” Diagonal 304.1(H) x 228.1(V) mm 337.92(H) x 270.336(V) mm a-si TFT active matrix 0.297 (H) x 0.297 (V) mm 0.264 (H) x 0.264 (V) mm 140/125 (Horizontal/Vertical) 140/110 (Horizontal/Vertical) 30 ~ 69 kHz Power Consumption Maximum Power Saving 56 ~ 75 Hz 16,194,277 colors 1024 x 768 @ 60 Hz 1024 x 768 @ 75 Hz Input Signal Sync. Video Signal Power Supply Input Output LW17E34C Audio Characteristics Audio Input 1 Audio Input 2 (PC) Headphone Output Frequency Response English-40 1280 x 1024 @ 60 Hz 1280 x 1024 @ 75 Hz H/V Separate, TTL, P. or N. 0.7 Vp-p @ 75 ohm AC 90 ~ 264V(50 Hz / 60 Hz) DC 14V/3A DC 14V/3.5A 48 W Dimensions (W x D x H) / Weight TV Body 461 x 87.6 x 305.5 mm / 3.9 kg With Stand 461 x 182.2 x 325.1 mm / 6.2 kg Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 30 ~ 81 kHz <3W 58 W 514.6 x 89.0 x 351.1 mm / 5.0 kg 514.6 x 180.9 x 371.3 mm / 7.7 kg 50 °F to 104 °F (10 °C to 40 °C) 10% to 80% - 13 °F to 113 °F (-25 °C to 45 °C) 5% to 95% RCA Jack (L, R), 0.5Vrms (-9dB) 3.5Ø Stereo Jack, 0.5Vrms (-9dB) Max. 10mW Output (3.5Ø Stereo Jack, 32Ω) RF: 80Hz ~ 15kHz (at- 3dB) A/V: 80Hz ~ 20kHz (at- 3dB) BN68-00438D-02_en 6/11/03 7:12 PM Page 41 Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring to the Video card user guide because the screen might not display or only the power LED might be on. For the display modes listed below, the screen image has been optimized during manufacture. Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) VGA 720 x 400 640 x 480 640 x 480 31.469 31.469 37.500 70.087 59.940 75.000 28.322 25.175 31.500 -/+ -/-/- SVGA 800 x 600 46.875 75.000 49.500 +/+ XGA 1024 x 768 1024 x 768 48.363 60.023 60.004 75.029 65.000 78.750 -/+/+ SXGA (LW17E34C) 1280 x 1024 1280 x 1024 63.981 79.976 60.020 75.025 108.000 135.000 + / -, + / +/+ English-41 BN68-00438D-02_en 6/11/03 7:12 PM Page 42 Maintenance of Your Television To avoid risk of electric shock, do not disassemble the TV cabinet (except for gaining access to the cable connectors as described on page 7). Users cannot service the TV. User maintenance is restricted to cleaning as explained below: Unplug the television from the power outlet before cleaning. ◆ When you clean the TFT-LCD and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let your television screen not to be forced but to be scrubbed out softly. If excessive force is applied, you can have a stain on it. ◆ Never use flammable cleaning material to clean your television or any other electrical apparatus. English-42 BN68-00438D-02_en 6/11/03 7:12 PM Page 43 How to assemble the TV set and stand base Note : The curved side of the stand base should be placed at the back of the TV set as shown in the above figure. English-43 BN68-00438D-02_en 6/11/03 7:12 PM Page 44 Installing the Wall Mount Kit (Sold separately) 1 2 English-44 BN68-00438D-02_en 6/11/03 7:12 PM Page 45 Installing the Wall Mount Kit (Sold separately) 3 4 English-45 BN68-00438D-02_en 6/11/03 7:12 PM Page 46 Wiring the Mains Power Supply Plug (UK Only) ◆ IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same color as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. ◆ IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE As these colors may not correspond to the colored markings identifying the terminals in your plug, proceed as follows: The wire colored BLUE must be connected to the terminal marked with the letter N or colored BLUE or BLACK. The wire colored BROWN must be connected to the terminal marked with the letter L or colored BROWN or RED. WARNING: English-46 DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLORED GREEN OR GREEN AND YELLOW. BN68-00438D-02_en 6/11/03 7:12 PM Page 47 Memo English-47 BN68-00438D-02_en 6/11/03 7:12 PM Page 48 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS