Download Ricoh SP 212 SNw Installation guide

Configuring the Scanner Settings
Initial Scanner Setup
The table on the next page shows all the setup items and their factory default values. The table also includes information about for which of the functions each of
the setup items is used (see the columns under “Purpose”), and the available
method for configuration (see the columns under “Method”).
For information about how to configure each of the setup items and how it
works, see the sections from p.52 “System Settings” to p.90 “Configuring Settings Using a Web Browser”, and also see the Web Status Monitor Help.
3
How to Read the Function Table
Note
❒ (WSM) signifies the names of Setup Items in Web Status Monitor.
❖ The Purpose Row
Under “Purpose” in the table on the next page, there is a column for each of
the functions listed below.
Note
❒ It is not necessary to set up configuration when using as a USB TWAIN scanner.
Column name:
Means the function for:
Delivery Server
Sending scan files by a delivery server using ScanRouter V2/Professional.
Mail
Sending scan files as e-mail attachments.
SMB
Sending scan files to a Windows shared folder.
FTP
Sending scan files to an FTP server.
Print
Printing scan files.
TWAIN
Using this machine as a network TWAIN scanner.
• A “ ” in a column means that the setup item to the left is essential to use the
function. Be sure to configure these settings before using this machine.
• A “b” in a column means that the setup item to the left is related to the function, but is not essential. Configure these settings as necessary.
• No mark in a column means that the setup item to the left has no direct relation to the function.
42