1
Download Motorola WiNG 5.2.6 Specifications
Transcript
18 - 6 WiNG 5.2.6 Wireless Controller CLI Reference Guide
18.1.3 no
radio-qos-policy
Negates a command or resets configured settings to their default. When used in the radio QOS policy mode, the no
command enables the resetting of accelerated multicast parameters, admission control parameters, and MultiMedia
parameters.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
no [accelerated-multicast|admission-control|wmm]
no accelerated-multicast [client-timeout|max-client-streams|
max-streams|overflow-policy|stream-threshold]
no admission-control [firewall-detected-traffic|implicit-tspec]
no admission-control [background|best-effort|video|voice] {max-airtime-percent|
max-clients|max-roamed-clients|reserved-for-roam-percent}
no wmm [background|best-effort|video|voice] [aifsn|cw-max|cw-min|txop-limit]
Parameters
• no accelerated-multicast [client-timeout|max-client-streams|max-streams|
overflow-policy|stream-threshold]
no
accelerated-multicast
Resets accelerated multicasting settings to their default values. The following
accelerated multicast control settings can be reverted:
• client-timeout – Resets the client timeout to the default value
• max-client-streams – Resets the maximum number of accelerated streams per client
to the default value
• max-streams – Resets the maximum number of accelerated streams to the default
value
• overflow-policy – Resets the overflow policy to the default value (reject)
• stream-threshold – Resets the number of packets per second threshold to the default
value
• no admission-control [firewall-detected-traffic|implicit-tspec]
no
admission-control
Reverts or resets admission control settings to their default. These controls are
configured on a radio for one or more access categories.
• firewall-detected-traffic – Does not enforce admission control for traffic whose access
category is detected by the firewall ALG
• implicit-tspec – Disables implicit traffic specifiers for wireless clients that do not
support WMM-TSPEC
