Download Code Alarm 4000 System information

exit time event flag, 37
inhibit arming if all inhibited, 41
inhibited alarm flag, 37
local alarm event flag, 37
number, 35
out of hours timezone, 39
pre-alarm event flag, 38
reporting, 39
warning time event flag, 38
Area linking, 107
using common areas, 107
Area tamper event flag, 41
Areas. See Area Database
alarm groups, 49
area linking, 107
assigned to alarm groups, 51
common areas, 29
name and number, 35
used as vaults, 106
zones, 29
Areas assigned to vaults, 106
Arm test
operation mode, 65
test sirens, 69
time to perform an arm test, 60
Arm/disarm timers
using restrictions with arm/disarm timers, 105
Arming without battery, 74
ATS system code, 76
Audio listen-in, 27, 40
Audio listen-in frame, 82
Audio listen-in time, 82
Auto arm/disarm, 104
number, 104
postpone automatic arming, 105
program alarm group to use, 104
program timezone to use, 104
Auto reset, 79
alarm group, 79
auto reset time, 79
Automatic testing procedure for zones, 29
Battery testing, 125
frequency, 125
manually testing, 126
Select battery test program, 125
starting time, 125
test period, 125
test report, 126
Bell 103 protocol, 122
Camera
film low level, 64
film out level, 64
reset using 0[ENTER], 69
suspicion time, 61
Cards. See Door control
second system code, 109
System code, 108
Cards arm after 3 badges, 47
Change own PIN code, 57
Channel mapping, 139
Class database, 136. See reporting
enable audio listen-in for a condition, 137
explanation of reporting, 148
list of reporting classes, 148
select the class, 136
select the condition, 136
specify central station for condition to report to, 137
Common area
programming, 29
zones, 29
174
Communication options, 80
allow audio listen-in, 84
dual reporting, 84
enable the line monitor, 81
MSN number, 80
PABX number, 80
program account codes, 83
program central station phone nbrs, 83
report inhibits, 85
select reporting format for central station, 82
select tone or pulse dialling, 80
SIA reporting with 3 digit extensions, 81
test calls, 138
use Bell or CCITT for SIA, 84
Computer connection, 118
Answering machine defeat, 122
attempt to connect to computer, 121
computer address, 121
enable Remote Control, 119
enable remote up/download, 118
number of calls before answering, 122
program callback telephone number, 121
program computer telephone number, 121
program service telephone number, 121
remote control if any area armed, 119
report access control events to computer, 120
report alarms to computer, 120
rings before answering inccoming calls, 122
security password, 121
up/download if any Area Armed, 119
Up/Download using a modem, 120
use Bell 103 protocol, 122
Connection type, 85
Custom LCD message, 127
Customer text on LCD, 127
Data Panels. See DGP Database
DGP database
online/offline, 48
polling, 48
type of data panel, 48
DGP Database, 48
battery testing, 125
DGP inhibited event flag, 129
DGP offline event flag, 129
program 4-door/4-lift DGP, 117
troubleshooting, 162
view poll errors, 114
Dial, 80
Diallers. See Communication options
Disable, 76
Disarm test
operation mode, 65
time to perform a disarm test, 60
Disarming
disarming the system, 14
Display card, 116
Door control
alarmcontrol with cards, 44
alarmcontrol with one key, 46
cancel door event flag, 111
cards always arm/disarm, 46
cards auto disarm, 46
display shunted zone, 45
door open command starts shunt, 111
door shunted when disarmed, 111
door shunted while armed, 111
ENTER key operation, 45
entry/exit shunting, 112
output controller, 43
overview of alarmcontrol options, 44
ATS2000/3000/4000/4500 Programming manual