Download Code Alarm 4000 System information
Transcript
Option Function On Pulse Activates for the programmed time or the active period of the logic result, whichever is the shortest. On Timed Activates for the programmed time regardless of the macro output changing. On Delay Activates after the programmed time period unless the result of the logic equation is no longer valid. Off Delay Follows the result of the logic equation, but remains active for the time programmed after the result of the logic equation is no longer active Latched Activates on any of the first three macro inputs in the logic equation and is only reset by the fourth macro input. Any programmed AND / OR function is not used) How to program Press one of these keypad buttons to: [MENU*] Display a new output function. 0 Leave the Program macro logic menu [ENTER] Save the displayed function and move to the next display. 35.1.2 M1 Times for 0 Seconds Time: Time The time period (2 – 255 seconds) that is used when any of the timed macro output functions is selected (pulse, on timed, on delay or off delay). Use any value of 2 or higher. 35.1.3 Macro output triggers event flag or zone M 1 Activates Event Flag 0 *-Change, No: Specify if the macro output should trigger an event flag or a zone and which event flag or zone. The macro output is triggered as a result of the logic equation on the macro inputs. The output will behave as programmed in the Macro output function. How to program Press one of these keypad buttons to: ? [ENTER] Enter and display new event flag or zone number. Enter the same number twice to invert the macro output. It will now trigger the event flag or output if the result of the equation is not true. An inverted macro output is recognised by the exclamation mark (!) preceding the number. [MENU*] Select “Event Flag” or “Zone”. [ENTER] Save the displayed details and move to the next display. 35.1.4 Macro inputs M 1 = E0 Or E0 Or E0 Or E0 *-Chg, Input 1: Program up to four macro inputs (event flag or output numbers) and whether each of those inputs performs an AND or an OR function in the logic equation. ATS 2000/3000/4000/4500 Programming manual 135