Download Sharp AL-1655CS Specifications
Transcript
AL-1655CS.book 65 ページ 2004年8月22日 日曜日 午後6時44分 USER SETTINGS Program number 4 5 6 7 8 Program name AUTO SHUT-OFF TIME Setting codes (factory default setting appears in bold) 1: 5 MIN. 2: 30 MIN. 3: 60 MIN. 4: 120 MIN. 5: 240 MIN. ON STREAM FEEDING 1: 2: OFF LAYOUT IN 2IN1 OFFSET FUNCTION ROTATE ORIG. IMAGE Explanation • This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when the power is on. All lights except the power save indicator go off. To resume normal operation, press the [START] key ( ). Normal operation also resumes automatically when a print job is received or scanning is begun from a computer. While in auto power shut-off mode, no keys (except the [START] key ( )) can be used. • When copying using the RSPF, while "SET ORIGINALS FOR STREAM FEEDING." appears in the display after an original has been scanned (about 5 seconds), a subsequent original can be placed and automatically fed into the machine. 1: PATTERN 1 2: PATTERN 2 • Use this setting to select the layout pattern when two original pages are copied onto a single sheet of paper (see page 35 for the layout patterns). 1: ON 2: OFF • When enabled, this function offsets the position of each set of copies in the output tray in copy mode, and each print job in printer mode. 1: ON 2: OFF • When two-sided copying is performed, this function rotates the image on the back of the original. This is convenient when binding the copies at the top (tablet binding). 7 65