Download Voice Processing System

Configure UADM2 Software
System Parameters
Parameter
User ID voice processing “jumps” to when voice processing detects a specific tone.
Used to handle incoming faxes, detect connections from TDD machines for deaf
communication, etc.
Up to 24 tones can be detected and directed to a mailbox by entering a User ID
followed by a number (1~24). To add a specific tone, such as a Fax connect tone, to
the tone table, it must be one of the first four tones defined, and it must be marked
as a “terminating tone.” The PCPM code associated with the tone must be in the
range 13~36, which corresponds to hot_boxes 1~24.
If no number is defined after the User ID, voice processing directs calls that emit an
industry standard Fax CNG tone of a specific frequency (factory defined in the tone
table) to the defined User ID.
Syntax: set hot_box XXX Y
Where: XXX = User ID
Y = hot box number (1~24)
If Y is omitted, all 24 hot boxes are set to the User ID entered. For example:
set hot_box 994sets all 24 to User ID 994
Configure UADM2
Software
hot_box
Description (continued)
set hot_box 994 1sets the first hot_box to User ID 994
Possible values: valid User ID, possibly followed by a hot_box value (1~24)
Default: 994
Synchronizes GVPH’s system clock with the system clock of the supporting
Strata CIX40 telephone system.
ksu_time
Default: true (Default is fixed and cannot be changed.)
Note GVPH synchronizes the GVPH’s system clock with the Strata CIX40’s
system clock. The KSU time displays at the top right corner of the Main
Menu.
login_pound
Voice processing prompts “Finish by pressing the pound sign” when requesting the
User ID or the security code during log on.
If the system is configured with fixed-length User IDs (by changing the values of a
fixed_lenX parameter), users may be confused if they hear this prompt and attempt
to enter a pound sign (#).
True:
Voice processing says the prompt.
False: Voice processing does not say the prompt.
Possible values: true, false
Default: true
System log file name. This log file contains start-up information, any execution error
information, system actions, and shutdown information.
lognam
Note It is a good idea to periodically archive or delete this file once or twice a year,
whenever you perform preventive maintenance.
Default: ‘Stratagy.LOG’
Note Default is fixed and cannot be changed.
max_dl_inits
Number of simultaneous ports that can go off-hook and dial the telephone system
initialization code. This is necessary because some switches are blocking.
Possible values: 1, 2, ..., number of ports
Default: 4
Number of times a prompt should repeat before hanging up.
max_prompt
Possible values: 1~9
Default: 2
Strata CIX40 Voice Processing Programming Manual
7/06
2-11