Download Data FLASH Editor - Renesas Electronics

Data FLASH Editor
EEPROM emulation data of 78K0R(MF2)
EEL exclusion erase counter:
Stores the EC value at exclusion time.
It is used by the EEL internally only.
EEL Format In Progress (FIP) indicator:
FIP<>0xFFFFFFFF indicates an FORMAT command discontinued by RESET.
It marks the completely EEL pool as inconsistent and enforces the user to restart
the FORMAT command.
7.2.2 Reference area
The “reference area” is located in each EEL block directly behind the block
header. It consists of so called reference entries that are used for instance
identification, localization and for safeguarding during the read/write process.
When writing new data into the EEL a corresponding reference entry is
stacked in the reference area.
The reference area is growing upstairs from lower widx to higher.
7.2.3 Data area
The “data area” consists of data-records and is located on the bottom of each
EEL pool block. Each data record within the data-area consists of pure data
information without any data- frame. The data-frame information exists
completely in the corresponding reference-entry in the reference-area.
When writing new data into the EEL the data area is growing downstairs from
higher widx to lower.
R01UT0176ED0000 Rev. 1.00
User Manual
29