Download FC3000S Microprocessor Control System for Elevator User Manual

FC3000S Microprocessor Control System for Elevator
Section 3：Control board,Extension board in car
3.1 CB_VE1 control board in car
An elevator car can use 4 control boards at most, which are used for double door system and persons with
disability elevator. Define the function of control board through the setting of DIP switch DIP.1、DIP.2. See chart
below:
???????????????
DIP.1
DIP.2
signal voltage
corresponding to PG
OFF
OFF
A door standard control board
in car
ON
OFF
A Door Control board without
obstacle in car.
OFF
ON
B door standard control board
in car
ON
ON
B Door Control board without
obstacle in car.
注：1、Blank means OFF
2、Control board in car can be used in combination listed as below:
a. Single standard control board in car, single car door elevator
b. Double standard control board in car, single car door elevator
c. Standard control board in car + without obstacle control board in car , single car door elevator
d. Single standard control board in car, double car doors elevator
e. Double standard control board in car, double car doors elevator
f. Double standard control board in car + without obstacle double control board in car, double car doors
elevator
3.1.1 Appearance and size
Size of car control device: 262×87
Installation size：87×（110＋142）（mm）
3-1
Zhuhai Alpha E&M
Co., Ltd.
TEL: (+86)-0756-3326175