Download Machine Model Parameter Determination Final Report

Expected Result: All slider bars corresponding to parameters other than those
belonging to saturation points will produce different results.
Actual Result:
R2006a: Same as R2006b
R2006b:
Voltage Step Test:
Rcomp and Xcomp on Genrou model has no effect on output.
Vrmax on Genrou Exst4b has no effect on output. Depending on other
parameter settings, simulation when Lpd is .1 sometimes results in simulation
error.
Tr, Vrmax, Kf, Tf, Tf1, Tf2, Fbf, Kii, Vfmax, Kh, E1, Se1, E2, Se2 on
Genrou Rexs has no effect on output.
Rcomp on Gensal has no effect on output.
Vimax on Gensal ext1 has no effect on output . Tb=0 simulation error
Tr, Vrmax, Tf, Llr, Klr, Velm, Gmax, Gmin on Gensal exst1 + hygov has
no effect on output.
Action Required: Simulation error cases are result of internal mathematics, no
changes necessary. Verify with GE which parameters should be disabled for
certain tests and include this information in setting file. After discussion with GE,
it appears that they do not want these parameters disabled.
Completed: Yes
2.1.5.1.2.6 Comparison of Simulation Data with PSLF Simulation Results
Test Case: Simulate all models with the parameters set at their default values and
compare to PSLF data.
Purpose: To verify that all models produce correct numerical results at their
default values.
Procedure: Use PSLF to prepare test data corresponding to the default case.
Export this data to a Microsoft Excel Spreadsheet whose format matches the one
described in the detailed design. Open each model from the opening window
import the test data. Press the simulate button. Compare the simulation results
with the PSLF results.
Expected Result: All plots will match within a reasonable tolerance.
Actual Result: To be completed by GE.
Test Case: Simulate all models with the parameters set at a value other than its
default and compare to PSLF data.
May07-18
Approach and Results
Page 12 of 65