Download Machine Model Parameter Determination Final Report

Purpose: To verify slider bars and edit boxes appear and resize correctly.
Procedure: Start home window with various numbers of parameters in setting
file and resize window by clicking and dragging the bottom right corner.
Expected Result: All slider bars and buttons show up completely and are
clickable, text is readable in edit box and is shown to at least 4 significant digits.
Labels are also readable.
Actual Result:
R2006a: Same as R2006b
R2006b: Appearance is sufficient at minimum of 1024x768 pixels.
Action Required: none
Completed: Yes
Test Case: Graph appearance at large and small screen size.
Purpose: Verify that graphs appear correctly.
Procedure: Run program with setting files that have different numbers of output
graphs to determine the maximum feasible number of output plot boxes.
Expected Result: All plots, labels and axes appear correctly up to a maximum
value.
Actual Result:
R2006a: Same as R2006b
R2006b: Appearance is sufficient at minimum of 1024x768 pixels.
Smaller windows still function, however there are some readability problems.
Action Required: none
Completed: Yes
2.1.5.2.2.9 Switching Between Different Machine Tests
Test Case: Select machine test from drop box
Purpose: Verify that correct edit box are disabled for each machine test, and that
a different event is simulated for each position.
Procedure: Select each machine test, simulate, verify that the correct boxes are
editable, and that the simulation results are logical.
Expected Result: Edit box are disabled properly, a different test is simulated, and
the simulation results make sense for each test selected.
Actual Result:
R2006a: Functions correctly, see note.
R2006b: Functions correctly, see note.
May07-18
Approach and Results
Page 23 of 65