Download Linear Meter Flow Calculation Program User Manual

Linear Meter Flow Calculation Program User Manual
Field
Sampler Accum
Sampler Duration
Description
Sets the quantity of fluid that must pass before
the status of the Output Point is set. Units are
Cf, M3, Lb, or Kg based on the Units Type for
Heating Value, Alarms, and Sampler on the
General tab.
Sets the duration, in seconds, for holding the
status of the Output Point to ON when the
quantity of fluid passed matches or exceeds the
Sampler Accum.
3. Click Apply to save any changes, and proceed to Section 3.1.6 to
configure the Calibration Factors tab.
26
Revised Aug-15