Download LM6069BFW
Transcript
LM6069BFW LCD Module User Manual Prepared by: Checked by: Approved by: Date: Date: Yang Date:2010-01-27 Rev. 0.1 URL: Descriptions Preliminary release www.topwaydisplay.com www.topwaysz.com Release Date 2010-01-27 Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 1 of 12 TOPWAY LCD Module User Manual LM6069BFW Table of Content 1. 1.1 1.2 1.3 Basic Specifications................................................................................................................ 3 Display Specifications ............................................................................................................................................ 3 Mechanical Specifications ...................................................................................................................................... 3 Block Diagram........................................................................................................................................................ 3 2. Terminal Functions.................................................................................................................. 4 3. Absolute Maximum Ratings.................................................................................................... 5 4. Electrical Characteristics........................................................................................................ 5 4.1 4.2 4.3 4.4 5. 5.1 5.2 5.3 5.4 5.5 5.6 URL: DC Characteristics ................................................................................................................................................. 5 LED Backlight Circuit Characteristics ..................................................................................................................... 5 AC Characteristics ................................................................................................................................................. 6 Reset Timing .......................................................................................................................................................... 8 Function specifications........................................................................................................... 9 Basic Setting .......................................................................................................................................................... 9 Resetting the LCD module ..................................................................................................................................... 9 Display Memory Map.............................................................................................................................................. 9 Display Commands .............................................................................................................................................. 10 Display Commands (continue) ............................................................................................................................. 11 Design and Handling Precaution.......................................................................................................................... 12 www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 2 of 12 TOPWAY LCD Module User Manual LM6069BFW 1. Basic Specifications 1.1 Display Specifications 1) LCD Display Mode : STN-Blue, Negative, Transmissive 2) Display Color : Display Data = “1” : Light Gray (*1) : Display Data = “0” : Dark Blue (*2) 3) Viewing Angle : 6H 4) Driving Method : 1/64 duty, 1/9 bias 5) Backlight : White LED backlight Note: *1. Color tone may slightly change by Temperature and Driving Condition. *2. The Color is defined as the inactive / background color 1.2 Mechanical Specifications 1) Outline Dimension : 98.0 x 60.0 x 11.0MAX (mm) (See attached Outline Drawing for details) 1.3 Block Diagram BLA BLK Back light LCD Panel 216×64Pixels VDD VSS /RD(E), /WR(R/W), DB0~DB7 /CS1, /RESET, A0 URL: www.topwaydisplay.com www.topwaysz.com IST3020 or equivalent Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 3 of 12 TOPWAY LCD Module User Manual LM6069BFW 2. Terminal Functions PIN NO. PIN Name I/O 1 2 3 VSS VDD NC Supply Supply / 4 A0 Input 5 /WR (R/W) Input /RD(E) Input DB0 : DB5 DB6(SCL): DB7(SI) BLA BLK I/O I/O I/O I/O I/O Power Power /CS1 Input /RESET Input NC NC NC NC / / / / 6 7 : 12 13 14 15 16 17 18 19 20 21 22 Interface setting: Setting JP1 JP2 JP3 JP4 JP7~JP12 URL: www.topwaydisplay.com www.topwaysz.com 8-bit parallel 8080 mode(Default) Descriptions 8-bit parallel 6800 mode Negative power supply,0V Positive power supply / Register Select A0 = H, Transferring the Display Data A0 = L, Transferring the Control Data /WR=LÆH, /RD=H; R/W=H,E=H; Data or Instruction Data or Status read latch into the LCD from the LCD module module R/W=L,E=HÆL; Data or Status latch /WR=H, /RD=L; into the LCD module Data or Status read form the LCD module 8-bit Data bus; Three state I/O terminal for display data or instruction data when /CS1=H, DB0~DB7=High Impedance Backlight Positive Supply Backlight Negative Supply Chip Select /CS1=L, enable access to the LCD module /CS1=H, disable access to the LCD module Reset signal /RESET = L, Initialization is executed /RESET = H, Normal running. / / / / 8080 mode(Default) OPEN CLOSE CLOSE OPEN OPEN 6800 mode CLOSE OPEN CLOSE OPEN OPEN Serial mode Not used, Leave open or pull Hi DB5-DB0 connect to VSS Serial clock input Serial data input SPI mode OPEN OPEN OPEN CLOSE CLOSE Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 4 of 12 TOPWAY LCD Module User Manual LM6069BFW 3. Absolute Maximum Ratings Items Supply Voltage Input Voltage Operating Temperature Storage Temperature Symbol VDD VIN TOP TST Min. -0.3 -0.2 -20 -30 Max. +3.6 VDD+0.2 +70 +80 Unit V V °C °C Condition VSS = 0V VSS = 0V No Condensation No Condensation Cautions: Any Stresses exceeding the Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. 4. Electrical Characteristics 4.1 DC Characteristics Items Operating Voltage Input High Voltage Input Low Voltage Operating Current 4.2 Symbol MIN. TYP. VDD VIH VIL IDD 2.7 0.85xVDD VSS - 0.3 VSS=0V, VDD=3.0V, TOP=25°C MAX. Unit Condition / Application Pin 3.3 V VDD VDD V /RESET, /CS1, A0, /WR, /RD, D0~D7 0.15xVDD V 2.5 mA VDD LED Backlight Circuit Characteristics Items Forward Voltage Forward Current Symbol VfBLA IfBLA MIN. - TYP. 3.3 68 MAX. 75 VBLK=0V, IfBLA=68mA, TOP=25°C Unit Applicable Pin V BLA mA BLA BLA BLK URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 5 of 12 TOPWAY 4.3 4.3.1 LCD Module User Manual LM6069BFW AC Characteristics 8080 Mode System Bus Timing Item System cycle time Address setup time (A0) Address hold time (A0) Control LOW pulse width (/RD) Control LOW pulse width (/WR) Control HIGH pulse width (/RD) Control HIGH pulse width (/WR) Data setup time Data hold time /RD access time (*2) Output disable time (*2) Symbol tcyc8 taw8 tah8 tcclr tcclw tcchr tcchw tds8 tdh8 tacc8 tch8 MIN. 430 10 10 86 86 86 86 58 22 7 VSS=0V, VDD=3.0V, TOP=25°C TYP. MAX. Unit ns ns ns ns ns ns ns ns ns 200 ns 143 ns Note: *1. Input signal rise/fall time should be less than 15ns . *2.All timing is using 20% and 80% of VDD as the reference. URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 6 of 12 TOPWAY 4.3.2 LCD Module User Manual LM6069BFW 6800 Mode System Bus Timing Item System cycle time Address setup time (A0) Address hold time (A0) Control LOW pulse width (R/W) Control LOW pulse width (R/W) Control HIGH pulse width (/RD) Control HIGH pulse width (R/W) Data setup time Data hold time /RD access time (*2) Output disable time (*2) Symbol tcyc6 taw6 tah6 tewlr tewlw tewhr tewhw tds6 tdh6 tacc6 toh6 MIN. 430 10 10 86 86 58 22 7 VSS=0V, VDD=3.0V, TOP=25°C TYP. MAX. Unit ns ns ns ns ns ns ns ns ns 200 ns 143 ns Note: *1. Input signal rise/fall time should be less than 15ns . *2. CL=100pF *3.All timing is using 20% and 80% of VDD as the reference. URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 7 of 12 TOPWAY 4.3.3 LCD Module User Manual LM6069BFW Serial Mode Interface Item Serial Clock Period Address setup time (A0) Address hold time (A0) SCL “H” pulse width SCL “L” pulse width Data setup time Data hold time CS-SCL time CS-SCL time Symbol tscyc tsas tsah tshw tslw tsds tsdh tcss tcsh MIN. 357 214 214 143 143 143 143 214 214 VSS=0V, VDD=3.0V, TOP=25°C TYP. MAX. Unit ns ns ns ns ns ns ns ns ns MIN. 1.5 VSS=0V, VDD=3.0V, TOP=25°C TYP. MAX. Unit 1.5 µs µs Note: *1. Input signal rise/fall time should be less than 15ns . *2. CL=100pF *3.All timing is using 20% and 80% of VDD as the reference. 4.4 Reset Timing Item Reset time Reset LOW pulse width Note: Symbol tr trw *1.All timing is using 20% and 80% of VDD as the reference. URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 8 of 12 TOPWAY LCD Module User Manual LM6069BFW 5. Function specifications 5.1 Basic Setting Basic Setting To drive the LCD module correctly and provide normally display, please use the following setting - ADC = 0 (normal) - SHL select = 1 (reverse) - LCD Bias Select = 1/9 - Initial Display Line = 0 - Entire Display ON/OFF = OFF (normal) - Reverse Display ON/OFF = OFF (normal) - Set Power Control Set: voltage follower = ON, voltage converter = ON, voltage regulator = ON - Built-in OSC = ON - Display ON/OFF = ON Note: *1. These setting/commands should issue the LCD module while start up. *2. See the Display Commands section for details. 5.2 Resetting the LCD module The LCD module should be initialized by using /RESET terminal. While turning on the VDD and VSS power supply, maintain /RES terminal at LOW level. After the power supply stabilized, release the reset terminal (/RESET=HIGH) 5.3 Display Memory Map Page address data 0 1 2 3 4 5 6 7 Column Address LCD Display (front view) D0 : D7 D0 : D7 D0 : D7 D0 : D7 D0 : D7 D0 : D7 D0 : D7 D0 : D7 216x64 pixels 00H Æ D7H Note: *1. ADC = 0 (normal) *2. SHL Selection = 1 (reverse) *3. Initial Display Line = 0 URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 9 of 12 TOPWAY 5.4 Note: URL: LCD Module User Manual LM6069BFW Display Commands *1. Do not use any other command not listed, or the system malfunction may result. *2. For the details of the Display Commands, please refer to IST3020 data sheet. www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 10 of 12 TOPWAY 5.5 Note: LCD Module User Manual LM6069BFW Display Commands (continue) *1. Do not use any other command not listed, or the system malfunction may result. *2. For the details of the Display Commands, please refer to IST3020 data sheet. 5.5.1 Power off the LCD Module It recommends that enter Power Save mode before power off the LCD module. 5.5.2 Refreshing The LCD Module It recommends that the operating modes and display contents be refreshed periodically to prevent the effect of unexpected noise. URL: www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 11 of 12 TOPWAY 5.6 LCD Module User Manual LM6069BFW Design and Handling Precaution 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. URL: The LCD panel is made by glass. Any mechanical shock (eg. dropping form high place) will damage the LCD module. Do not add excessive force on the surface of the display, which may cause the Display color change abnormally. The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD protective film until the last step of installation. Never attempt to disassemble or rework the LCD module. Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (eg. water) may damage the LCD. When mounting the LCD module, make sure that it is free form twisting, warping and distortion. Ensure to provide enough space (with cushion) between case and LCD panel to prevent external force adding on it, or it may cause damage to the LCD or degrade the display result. Only hold the LCD module by its side. Never hold LCD module by add force on the heat seal or TAB. Never add force to component of the LCD module. It may cause invisible damage or degrade of the reliability. LCD module could be easily damaged by static electricity. Be careful to maintain an optimum anti-static work environment to protect the LCD module. When peeling off the protective film from LCD, static charge may cause abnormal display pattern. It is normal and will resume to normal in a short while. Take care and prevent get hurt by the LCD panel sharp edge. Never operate the LCD module exceed the absolute maximum ratings. Keep the signal line as short as possible to prevent noisy signal applying to LCD module. Never apply signal to the LCD module without power supply. IC chip (eg. TAB or COG) is sensitive to the light. Strong lighting environment could possibly cause malfunction. Light sealing structure casing is recommend. LCD module reliability may be reduced by temperature shock. When storing the LCD module, avoid exposure to the direct sunlight, high humidity, high temperature or low temperature. They may damage or degrade the LCD module www.topwaydisplay.com www.topwaysz.com Document Name: LM6069BFW-Manual-Rev0.1.DOC Page: 12 of 12