Download PVG 32 Metric Ports Technical Information

PVG 32
Metric Ports
Technical
Information
B
T
PVG 32 AG Modules - Metric Ports
Technical Information
Revisions
Revision History
Table of Revisions
Date
Dec 2010
Mar 2012
Literature References
Page
40
All
Changed
New back cover
Layout changes, and change in the table, page 21.
Rev
AC
AD
List of technical documents associated with these products:
1) PVG32 Proportional valve: 520L0344
2) Hitch Control System Description: 11036124
3) Data sheet PVBZ: 520L0681
4) Data sheet PVBZ-HS: 520L0956
5) Data sheet PVBZ-HD: 11035599
6) Instruction PVC: 520L0572
7) PVE series 4 for PVG: 520L0553
8) PVED-CC: 520L0665
9) Data sheet PLUS+1™ MC024-010 and MC024-012 Controllers: 520L0712
10) Hitch Control Application Block User Manual: 11033753
© 2012 Sauer-Danfoss. All rights reserved.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer -Danfoss reserves the right to alter its products without prior notice. This also applies to products already
ordered provided that such alterations can be made without affecting agreed specifications. All trademarks
in this material are properties of their respective owners. Sauer-Danfoss, the Sauer-Danfoss logotype, the
Sauer-Danfoss S-icon, PLUS+1™, What really matters is inside® and Know-How in Motion™ are trademarks of the
Sauer-Danfoss Group.
Front cover illustrations: F301 054, P301 595, P301 597, P301 598
Drawing: V310080.A
2
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Contents
Function
Introduction...................................................................................................................................................... 4
Short Overview................................................................................................................................................ 4
Hitch Control..................................................................................................................................................... 4
Function.............................................................................................................................................................. 5
Warning.............................................................................................................................................................. 5
Sectional Drawing........................................................................................................................................... 6
Technical Data
PVG32 Valve Group......................................................................................................................................... 7
Basic Module Type PVBZ for EH Auxiliary Valve Functions Introduction.................................... 9
Basic Module – Type
PVBZ
PVG 32 ..............................................................................................................................................................10
PVBZ Module..................................................................................................................................................10
Specifications..................................................................................................................................................10
PVBZ with Optional
Diverter Feature PVBD
Introduction, Features.................................................................................................................................11
PVG 32 ..............................................................................................................................................................12
PVG 32 Hitch Valves
Basic Module Type
PVBZ-HS (Hitch SingleActing)
Basic Module Type
PVBZ-HD (Hitch for
Double-Acting)
PVP with integrated
HPCO
Modules and Code
Numbers
Activation Characteristics
Pressure Drop
Characteristics
Introduction, Features.................................................................................................................................14
Safety Recommendations for the OEM and User..............................................................................14
PVG 32 Hitch Single-Acting Valve Module...........................................................................................15
Dimensions and
Schematic Examples
Drawings for 5-section groups.................................................................................................................33
Drawings for 3-section group...................................................................................................................35
Drawings for 2-section group...................................................................................................................37
Introduction, Features.................................................................................................................................16
PVG-32 Hitch Double-Acting Valve Module with Multivalve........................................................17
Introduction, Features.................................................................................................................................18
Float Spools, PVBZ........................................................................................................................................26
Pressure Drop Characteristics of Float Spools....................................................................................27
Pressure drop A/B → T characteristic for PVBS 1157B9414 and PVBS 157B9434...............27
Pressure drop A/B → T characteristic for PVBS 157B9413.......................................................27
Pressure drop A/B → T characteristic for PVBS 157B9642.......................................................28
Pressure drop A/B → T characteristic for PVBS 157B9411.......................................................28
Pressure drop A/B → T characteristic for PVBS 157B9410.......................................................29
Pressure drop A/B → T characteristic for PVBS 157B9415.......................................................29
Single Acting Spools Characteristics for PVBZ-HS ............................................................................30
Pressure Drop Characteristics in Lower Mode Position, Max. Spool Travel..............................30
3/3 spools characteristic for PVBZ-HS 157B9411; Oil flow, spool travel and voltage.......30
Pressure drop B → T characteristic for PVBS 111023550, 111023551 and 111023552....30
Spools Characteristics for PVBZ-HD.......................................................................................................31
Pressure drop B → T characteristic for PVBS 157B9414; PVBZ-HD double acting mode..31
Pressure drop A → T characteristic for PVBS 157B9414; PVBZ-HD double acting mode.32
Pressure drop A → T characteristic; PVBZ-HD single acting mode........................................32
Order Specification.......................................................................................................................................39
11051935 • Rev AD • Mar 2012
3
PVG 32 AG Modules - Metric Ports
Technical Information
PVG Product Image and Introduction
Introduction
The PVG 32 valve was originally launched with a range of
high-performance electrical actuators in 1988. During recent
years, several AG (agricultural) customer projects have
motivated several innovations, and today our valve program
offers components and features as compiled in this Technical
Information or referred to in listed literature references.
F301 300
Metric ports:
We have developed a range of modules with metric ports. These modules comprise
of various inlets, working modules for auxiliary functions, hitch modules, special top
mounted modules and endplates. The range of our PVE - Series 4 is used as actuation.
Target applications:
The target application area for this product range is mainly Agriculture – especially
complete EH valve solutions for tractors, but also other applications can benefit from the
new features offered.
Short Overview
Besides the inlets suited for fixed as well as for LS-controlled variable piston pumps, you
will find a range of valve modules listed. These valves enable you to assemble a valve
solution using EH Aux valves and hitch valves for tractors.
The PVE Series 4 generation with either analogue and digital pilot heads offers multiple
possibilities of customizing valves for individual needs – ranging from simple analogue
versions to fully ISOBUS compliant actuators with numerous variants in between,
analogue as well as digital.
Hitch Control
Together with the introduction of this product range, Sauer-Danfoss has developed
a hitch control SW block available in our PLUS+1™ GUIDE which on base of a PLUS+1
controller can offer a Hitch control system for tractors.
These components allow for design of hitch systems that incorporate intuitive control as
well as a number of innovative new solutions. The components available offer significant
advantages in controlling both the single and double acting systems, including easy
understanding of both Force and Slip control. In addition to performing state of the art
operation of hitch, the software block contains logic that ensures the full potential of the
Sauer-Danfoss hitch valves are exploited.
The technical information references mentioned describes the Sauer-Danfoss concept
behind the operation of a hydraulic hitch system, and the different types of systems and
components available from Sauer-Danfoss.
4
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Function
Function
When main spools (15) are in neutral position, the pilot operated check valves (hereafter
PO Check valves) are kept closed by a spring plus the work port load, which is directed to
the spring side of the PO Check valves (14) via a small orifice.
If a main spool is actuated to have flow out of the B port, the meter out flow forces the
respective PO Check valves valve to open. At the same time, pilot pressure is guided via
the main spool to the back side of a small pilot valve (12) on the A port side. This will
ensure that the load pressure behind the PO Check valves is released to a separate tank
T0 (20) via a seat valve and allow the PO Check valves to open and let return flow pass
across the main spool back to tank.
For float function, both PO Check valves are released to tank at the same time as
described above.
In some applications with low load pressure, it is necessary to force open the PO Check
valves by a pin (17). This pin is actuated by means of pump pressure on the A port side.
PVBZ modules cannot be optionally mounted (PVM on A - Port side only).
The separate tank connection T0 is needed to ensure proper performance of the PO
Check valvess regardless of the pressure in main tank line T. It is therefore necessary to
connect the T0 port in the Inlet PVP direct to the oil reservoir with a separate hose, see
dimensional drawing examples.
All the valve modules in this Technical Information have a T0 gallery!
When using PVP with HPCO function (T port can be pressurised) please make sure to
lead return flow from the A and B ports to tank via a separate tank port in the end plate
PVST.
Warning
WWarning
All makes and all types of directional control valves – inclusive proportional valves – can
fail and cause serious damage. It is therefore important to analyse all aspects of the
application.
Because the proportional valves are used in many different operation conditions and
applications, the manufacturer of the application is responsible for making the final
selection of the products- and assuring that all performance, safety and warning requirements of the application are met.
The process of choosing the control system – and safety level – could e.g. be governed
by ISO 13849 (Safety related parts of control system).
11051935 • Rev AD • Mar 2012
5
PVG 32 AG Modules - Metric Ports
Technical Information
Sectional Drawing
Sectional Drawing
1
T
2
P
10
3
M
PVP
9
4+5
LS
11
8
6
7
12
14
A
B
1 Pressure relief valve
2Pressure reduction valve
for pilot oil supply
3 Pressure gauge connection
4 Plug, open centre
5 Orifice, closed centre
6 Pressure adjustment spool
7 Plug, closed centre
8 LS connection
9 T0 connection
10Plug - to be removed for internal
T0 (157B5130, 157B5131,
157B5330 and 157B5331 only)
11 LS signal
12 Pilot valve for PO Check valves
13 Shuttle valve
14Pilot operated
check valve, PO Check valves
15 Main spool
16Compensator
17 Shuttle pin
18Max. oil adjustment
screws for ports A and B
19 Pilot supply for PVE
20 Separate tank line, (T0)
PVBZ
13
15
16
B
17
A
PVBZ
B
B
A
PVBZ
A
20
19
18
V310138.A
6
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Technical Data
Spool travel,
float position spool
Proportional range
Float position
250 bar
280 bar
280 bar
25 / 40 bar
25 bar
140 l/min
100 l/min
± 7 mm
± 5.5 mm
7.5 mm
Dead band,
flow control spool
Standard
± 0.8 mm
[±0.03 in]
1 cm3/min
[0.06 in3/min]
6 cm3/min
[0.37 in3/min]
25 cm3/min
30 → 60°C
-30°C
+90°C
-30 → +60°C
12 - 75 mm2/s
4 mm2/s
460 mm2/s
18/16/13
[1.53 in3/min]
[86 → 140°F]
[–22°F]
[194°F]
[–22 → +140°F]
[65 - 347 SUS]
[39 SUS]
[2128 SUS]
18/16/13
PVG32 Valve Group
Max. pressure
Oil flow, rated
Port P continuous
Port A/B
Port A/B without P/O checks
Port T, static/dynamic
Port T Hitch Single-Acting Module
Port P
Port A/B, with press. comp.
Spool travel, standard
Max. internal leakage at
200 bar [2900 psi] and
21 mm2/s [102 SUS]
Oil temperature
(inlet temperature)
PVBZ with PO Check
valves
A/B → T
PVBZ with PO Check
valves and PVLP
PVB with PVLP
Recommended temperature
Min. temperature
Max. temperature
Ambient temperature
Oil viscosity
Filtration
Operating range
Min. viscosity
Max. viscosity
Max. contamination (ISO 4406)
[3625 psi]
[4061 psi]
[4061 psi]
[362 / 580 psi]
[362 psi]
[37.0 US gal/min]
[26.4 US gal/min]
[±0.28 in]
[±0.22 in]
[±0.30 in]
6/2 Diverter Valve PVBD
Max pressure PVBZ module with mounted diverter PVBD
Oil flow, rated PVBZ module with mounted diverter PVBD
Port A/B
Max recommended
280 bar [4061 psi]
80 l/min [21.1 US gal/min]
Port A/B
280 bar [4061 psi]
100 l/min [26.4 US gal/min]
Multi-Valve Single- / Double-Action
Max pressure PVBZ module with mounted multi valve
Oil flow, rated PVBZ module with mounted multi valve
11051935 • Rev AD • Mar 2012
7
PVG 32 AG Modules - Metric Ports
Technical Information
Technical Data
PVG32 Group Valve
PVBZ-HD
PVBZ with Diverter
PVE
PVC
PVBZ
PVBZ-HS
PVML
PVM
PVP
V310070.A
8
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Basic Module Type PVBZ for EH Auxiliary Valve Functions
Introduction
The PVBZ valve is a load and pressure compensated valve module with two pilot
operated check valves (PO Check valves) in the A- and B-ports. These are limiting the
work port leakage to a very low limit, below 1 ccm/min.
PVBZ modules will always have 2 PO Check valves one in each work port.
Besides compensation, the pressure compensator can limit the work port pressure blow
up to 4 - 5 bar.
The special PVBZ load compensated module was developed for applications that
require integrated pilot operated check valves in the work ports that required to limit the
port leakage to zero. See “Technical Data”.
The new PVBZ basic module can be mixed with basic modules PVB (with additional tank
line T0) and offers the following features:
Features
•
Integrated pilot operated check valves for limited internal leakage
•
Can be mixed with PVB with T0 gallery
•
LS a/b shuttle for float spools
•
Standard 4/4 float spools
•
Integrated thermo relief valve as option (modules with threaded ports only)
•
Manifold version for Sauer-Danfoss designed valves or customer designed quick
coupler block
•
Compensator with bleed off
•
Auxiliary valve on tractors for function control on implements; cylinder positioning
and speed control of hydraulic motors.
11051935 • Rev AD • Mar 2012
9
PVG 32 AG Modules - Metric Ports
Technical Information
Basic Module – Type PVBZ
PVG 32
PVBZ Module
PO Check valves
Pilot Valves
Forced Opening Shuttle Pin
A
Analogue or Digital
CAN ISOBUS
B
P301 015
PVM Manual Actuator
Specifications
Pressure Compensator with bleed off
Product Parameters
Port P continuous
Maximum pressure
Port A/B
Oil flow, rated
Port A/B, with press. comp.
Spool travel, standard
Proportional range
Spool travel, float position spool
Float position
10
Inductive LVDT Sensor
250 bar
[3625 psi]
280 bar
[4061 psi]
100 l/min
[26.4 US gal/min]
± 7 mm
[±0.28 in]
± 5.5 mm
[±0.22 in]
7.5 mm
[±0.30 in]
Dead band,flow control spool
Standard
± 0.8 mm
[±0.03 in]
Max. internal leakage at 150 bar
[2175 psi] and 21 mm2/s [102 SUS]
A/B → T
1 cm3/min
[0.06 in3/min]
11051935 • Rev AD • Mar 2012
PVE Actuator
PVG 32 AG Modules - Metric Ports
Technical Information
PVBZ with Optional Diverter Feature PVBD
Introduction
The utilization of a PVBZ module can be further enhanced by adding a diverter valve.
Mounted on top of the PVBZ valve slice, a 6/2 PVBD diverter valve can direct valve flow
to either of two set of ports (A1/B1 or A2/B2). The PVBD diverter spool (shift spool) is
actuated by the PVC solenoid valve by means of pilot pressure.
Principle description of PVBD diverter:
• PVC off: The shift spool is held in position (flow to A1/B1) by the spring in the right
hand side (opposite the PVC). The spring chamber is always connected to the T0
gallery in the PVBZ body.
• PVC on: Pilot pressure is led into the chamber next to the PVC. A limited flow is
passing through the shift spool and the two orifices and into the spring chamber
connected to T0. Pressure-drop across the orifices creates the shift force moving the
shift spool towards the spring. As a result, port A2/B2 becomes active.
Leakage (along the spool clearance) from pressurized work ports A1/B1 or A2/B2 will
always be drained to T0 either directly in the spring chamber or through the shift spool.
This secures safe positioning of the shift spool as leakage never will build up pressure up
in the control chambers.
Safety recommendation: Shift of the diverter should only be possible when the main
spool is in neutral. This has to be ensured through a proper set-up in the controller/MMI
hardware.
Features
•
Enlarge the application range (2 functions)
•
To be mounted on top of PVB or PVBZ modules
•
Pilot operated with PVC
•
Auxiliary valve on tractors for function control on implements: cylinder positioning
when the demand on neutral port leakage is limited.
11051935 • Rev AD • Mar 2012
11
PVG 32 AG Modules - Metric Ports
Technical Information
PVBZ with Optional Diverter Feature PVBD
PVG 32
PVBZ Module
PVBD (Diverter)
PVC
A1
A2
B1
B2
T0
Analogue or
Digital CAN
ISOBUS
B
A
Pilot supply
PO Check valve
Pilot Valve
PVE
Actuator
PVM Manual
Actuator
Specifications
Pressure compensator with bleed off
P301 096
Product Parameters
Max. pressure
Port A/B
Oil flow rated
Max recommended
Leakage levels * A1, A2, B1, B2 port
Pressure drop*
A/B to A1/B1 or A2/B2 or vice versa
PVC off
Pilot oil consumption
PVC on
Environmental
Temperature
specifications
Oil viscosity etc.
Connector type
PVC solenoid (NC)
Zener diode included
Safety recommendations
12
Inductive LVDT Sensor
11051935 • Rev AD • Mar 2012
280 bar
[4061 psi]
80 l/min
[21.1 US gal/min]
10 ml/min @ 70 bar
30 ml/min @ 210 bar
0.5 bar @ 40 l/min
2.0 bar @ 80 l/min
0.0 l/min
0.3 l/min
[7.3 psi @ 10.6 US gal/min]
[29 psi @ 21.1 US gal/min]
As for PVBZ
AMP JPT 2 Pin
Shift of the diverter should only be possible
when the main spool is in neutral.
PVG 32 AG Modules - Metric Ports
Technical Information
PVG 32 Hitch Valves
General Introduction
Two types of hitch valves are available for hitch or similar applications. The two valve
options offered are the PVBZ-HS single acting and the PVBZ-HD double acting. The
PVBZ-HS matches the market standard whereby implements are raised hydraulically and
lowered only by the pull of gravity. The PVBZ-HD has the unique ability to raise and lower
either as single- or double-acting.
The benefits of the PVBZ-HD reflect a departure from old hitch norms - increased comfort
when attaching implements due to the same speed up and down and safer detachment of
heavy implements from the driver’s seat.
The full benefit of the possibilities with the PVBZ-HD is easily obtained by use of the
PLUS+1 hitch core application block. The core application block shifts the valve between
single- and double-acting hitch according to the most suitable operation. The operator
will not have to select the operation but will notice the benefits during normal operation
of the hitch. Work-modes are single-acting as it is standard today, but manual operation
up and down are double-acting to increase comfort, functionality and safety.
For further info and more details please see the Sauer-Danfoss Hitch system description
see literature reference page 2.
11051935 • Rev AD • Mar 2012
13
PVG 32 AG Modules - Metric Ports
Technical Information
Basic Module Type PVBZ-HS (Hitch Single-Acting)
Introduction
Single acting PVBZ-HS slice for standard hitch application.
It has its own tank port to direct the return flow directly into the tank with a minimum of
back pressure. This prevents tank-line pressure influence, especially when lowering the
un-loaded (empty) hitch under cold conditions (high oil viscosity).
Similar to the auxiliary slice, the single acting PVBZ-HS slice is a pressure-compensated
valve slice with one P/O check valve on B-port only. The same technology as in the PVBZ
module is used.
Besides the flow paths, the spool is directing the pilot pressure to the pilot valve for P/O
check valve pressure release as well as to the shuttle pin in order to force the P/O popped
to open under low load conditions. This ensures a fully open flow path in lower mode.
The B-port is normally equipped with a PVLP shock valve.
PVBZ-HS incorporates a compensator with bleed-off to prevent pressure building up
between the pump gallery and the work ports.
A special 3/3 spool with optimized flow characteristics, both in meter-out as well as in
meter-in direction, has to be controlled by a high performance actuator.
Features
Safety Recommendations
for the OEM and User
•
Low leakage work port
•
Separated tank port
•
Integrated PVLP shock/anti cavitation valves
•
Can be mixed with PVB/ PVBZ with T0 gallery
•
Compensator with bleed off
•
Rear-Hitch on tractors
•
Header control on combines and harvesters
To avoid unintended raise of the empty hitch the tank port on PVBZ-HS always has to be
connected direct to tank without any restriction or pressure build up possibilities. This
also ensures lowering in lower mode under cold conditions (high viscosity oil).
In case of manual actuation of the Hitch function (limp home mode) the power supply to
the PVE has to be disabled before the PVM (hexagon) can be actuated.
The OEM /end user needs to be aware of the dangerous operation when performing
manual raise/lowering of the hitch and be close to the hitch arms.
14
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Basic Module Type PVBZ - HS (Hitch Single-Acting)
Analogue or
Digital CAN
ISOBUS
PVG 32 Hitch SingleActing Valve Module
PVLP 63
B
T
Pilot supply
PO Check valve
Pilot Valve
PVM Manual
Actuator
Specifications
PVE Actuator
Pressure Compensator with bleed off
Inductive LVDT Sensor
P301 095
Product Parameters
Port P
Maximum pressure
continuous
Port B
Port T, static/dynamic
Oil flow, rated, Port B, with press. comp.
Spool travel, standard
Dead band, flow control spool, standard
Max. internal leakage at 150 bar [2175 psi]
B → T, with PVLP:
and 21 mm2/s [102 SUS]
11051935 • Rev AD • Mar 2012
250 bar
[3625 psi]
280 bar
[4061 psi]
25 bar/40 bar
[365/580 psi]
100 l/min
[26.4 US gal/min]
± 7 mm
[±0.28 in]
± 0.8 mm
[±0.03 in]
6.0 cm3/min
[0.37 in3/min]
15
PVG 32 AG Modules - Metric Ports
Technical Information
Basic Module Type PVBZ-HD (Hitch for Double-Acting)
Introduction
The double-acting hitch slice consists of the PVBZ valve-section with a flanged-on
single/double-acting selector (multi-valve) actuated by a PVC valve.
By energizing or de-energizing the PVC, the multi-valve shifts the slice between singleor double-acting work-modes. This is of great benefit in hitch applications both for rear
and front hitches. When the slice is operating as single-acting, the A-port is connected to
tank in the PVBZ body.
The PVBZ base of the PVBZ-HD has similar features as the PVBZ valve-slice. That is PO
Check valves for low leakage as well as compensator with bleed-off to eliminate pressure
build-up between compensator and work-ports.
The flanged on multi-valve contains the shifting spool to switch port A between T and
port A of the PVBZ. It also contains a PVLP shock/suction valve on port B.
The change between single- and double-acting modes is operated independently of
valve-flow command.
Features
16
•
Low leakage work port (B-port)
•
Standard 4/4 float spools to be used
•
Electrical mode shift into pure 3/3 single acting functionality of double acting
cylinder
•
Integrated PVLP shock/anti cavitation valves (B-port)
•
Single and Double Acting (see Hitch Control System Description for detailed set-up
and benefits)
•
Compensator with bleed off
•
Rear and front hitch linkages on medium and higher performance tractors.
•
Header control on combines and harvesters.
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Basic Module Type PVBZ-HD (Hitch for Double-Acting)
PVG-32 Hitch DoubleActing Valve Module
with Multivalve
PVC
Mode shift spool
A
B
PVLP 63
Analogue or
Digital CAN
ISOBUS
LS
B
A
Tank
PO Check valves
Pilot Valve
Pilot Supply
PVE
Actuator
PVM Manual
Actuator
Specifications
Pressure Compensator with bleed off
Inductive LVDT sensor
P301 094
Product Parameters
Port P
continuous
Maximum pressure
Port A/B
Oil flow, rated
Pilot oil consumtion
Environmental specifications
PVC solenoid (NC)
11051935 • Rev AD • Mar 2012
Port A/B, with press. comp.
PVC off
PVC on
Temperature oil viscosity etc.
Connector type Zener diode included
250 bar
[3625 psi]
280 bar
[4061 psi]
100 l/min
[26.4 US gal/min]
0.0 l/min
0.3 l/min
As for PVBZ
AMP JPT 2 Pin
17
PVG 32 AG Modules - Metric Ports
Technical Information
PVP with integrated HPCO
Introduction
Together with the introduction of PVBZ (and PVB with separate tank line T0)
Sauer-Danfoss can now also supply PVG 32 valves with integrated HPCO functionality
(High Pressure Carry Over).
The HPCO function will guide the pump flow not used in the PVG 32 valve group via the
HPCO port to for example a directional valve.
The PVP pump side module with integrated HPCO function can only be mixed with PVB,
PVBZ and PVST mentioned in this Tech Note.
Features
18
•
HPCO functionality
•
Prioritized flow for PVG 32
•
Reduced plumbing
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Versions and Code Numbers, Inlet Moduls
Symbol
Description PVP / PVPV
PVP open centre pump side module for
pumps with fixed displacement.
P
External T0
T
T0 M
P301 032
T(HPCO)
LS
T0 M
P301 033
Pp
P
T
T0 M
P2 LS P301 034
T (HPCO)
P
Pp
T0 M
P2 LS P301 035
P
T2
T
T0
M
LS
P301 036
P2
P
T0
T2
T
T02
LS
LS
T2
T
T02
M 27x2
M 27x2
M 14x1.5
M 14x1.5
M 14x1.5
Code number
ISO 6149 DIN 3851
Yes
11072195
Pport:
M 27x2
Tport: M 27x2
(HPCO)
With pilot supply for electrical actuation. Mport:
M 14x1.5
Prepared for HPCO - use Tport.
LSport: M 14x1.5
Note: PVG group requires PVST
T0port:
M 14x1.5
(endplate with T port).
Yes
157B5961
PVP open centre pump side module for
pumps with fixed displacement
Pport:
M 22x1.5
P2port: M 16x1.5
Tport:
M 22x1.5
External T0
Mport:
M 10x1.0
LSport: M 12x1.5
With pilot supply for electrical actuation. T0port: M 16x1.5
Measure port for pilot supply.
Ppilotport:M 10x1.0
PVP open centre pump side module for
pumps with fixed displacement.
External T0
With pilot supply for electrical actuation.
Prepared for HPCO - use Tport
Note: PVG group requires PVST
(endplate with T port)
Pport: M 22x1.5
P2port: M 16x1.5
Tport: M 22x1.5
(HPCO)
Mport: M 10x1.0
LSport: M 12x1.5
T0port: M 16x1.5
Ppilotport:M 10x1.0
PVPV closed centre pump side module
for pumps with variable displacement.
Pport: Tport:
T2port:
External T0.
Mport:
LSport:
With pilot supply for electrical actuation. T0port:
Prepared for PVLP.
Pport: P2port: Tport: T2port: External T0
LSport: T0port: With pilot supply for electrical actuation. T02port:
PVPV closed centre pump side module
for pumps with variable displacement.
M 33x2
M 33x2
M 14x1.5
M 14x1.5
M 14x1.5
M 16x1.5
M 27x2
M 14x1.5
M 27x2
M 14x1.5
M 14x1.5
M 14x1.5
M 14x1.5
Yes
157B5964
Yes
157B5965
Yes
157B5969
Yes
11003806
Yes
11055758
P301 037
P2
P
T0
With pilot supply for electrical actuation.
Pport:
Tport:
Mport:
LSport:
T0port:
T0
facility
PVP open centre pump side module for
pumps with fixed displacement.
External T0.
P
LS
Port dimensions
PVPV closed centre pump side module
for pumps with variable displacement.
External T0 without pilot supply
V310061.A
11051935 • Rev AD • Mar 2012
Pport:M27x2
P2port:M14x1.5
Tport:M27x2
T2port:M14x1.5
LSport:M14x1.5
T0port:M16x1.5
T02port:M14x1.5
19
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Symbol
Description
PVB / PVBZ
PVB with
compensator
T0 facility
LS a/b shuttle
valve
prepared for
PVLP shock
valves
B
A
T0 Pp
Port
Dimen-sions
Versions and Code Numbers, PVB Basic Modules
M22 x 1.5
Yes
Manifold
PVBD
Yes
Code Number
Code Number
Code
without thermal
with thermal relief
Number
relief valve
valve
Manifold
ISO 6149 DIN 3851 ISO 6149 DIN 3851 Versions
157B6850
LSP T
P301 038
PVB with
compensator
T0 facility
LS a/b shuttle
valve
prepared for
manifold PVBD
B
T0
A
Pp
P301 039
20
T0
facility
11051935 • Rev AD • Mar 2012
157B6969
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Versions and Code Numbers, PVBZ Auxiliary Modules
Symbol
Description PVB /
PVBZ
Port
PVBZ as PVB
Compensator w. bleed
off and check valve
M22 x 1.5
T0 facility
LS a/b shuttle valve
B
A
T0
facility
Code Number
Code Number
Code
without thermal
with thermal relief
Number
relief valve
valve
Manifold
ISO 6149 DIN 3851 ISO 6149 DIN 3851 Versions
Yes
157B6955
Yes
157B6957
P301 040
PVBZ 2 PO Check
valves.
Shuttle pin.
Compensator w. bleed
M22 x 1.5
off and check valve
T0 facility
LS a/b shuttle valve
B
A
P301 041
PVBZ 2 PO Check
valves.
Shuttle pin.
Compensator w. bleed
M22 x 1.5
off and check valve
T0 facility
LS a/b shuttle valve
B
A
Yes
11024817
P301 042
B
A
T0 Pp
LS P T
PVBZ 2 PO Check
valves.
Shuttle pin.
Compensator w. bleed
M22 x 1.5
off and check valve
T0 facility
LS a/b shuttle valve
Yes
157B6954
P301 043
B
T0
A
Pp
P301 044
T0
B
A
T0
P301 045
PVBZ 2 PO Check
valves.
Shuttle pin.
Compensator w. bleed
off and check valve
Manifold
T0 facility
PVBD
LS a/b shuttle valve
LS return
manifold PVBD
PVBZ 2 PO Check
valves.
Shuttle pin.
Compensator w. bleed
off and check valve
Manifold
T0 facility
Special
LS a/b shuttle valve
interface
LS return
Quick coupler block
manifold
11051935 • Rev AD • Mar 2012
Yes
157B6958
Yes
11005475
21
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Versions and Code Numbers, PVBZ-HS, PVBZ-HD Modules
Symbol
Description PVBZ
B
T
P301 046
PVBZ-HS with PO Check valve in B port.
Compensator w. bleed off and check
valve
T0 facility
Valve for 3/3 spool - single acting only!
B-port prepared for PVLP
Own T port - enables lowering of no
loaded actuator.
Port
Dimensions
Code Numbers
Code Numbers
ISO 6149 DIN 3851 Manifold versions
B-port
M22 x 1.5
T-port
M22 x 1.5
157B6968
PVBZ with PO Check valves.
Shuttle pin
Compensator w. bleed off and check
valve
T0 facility
LS a/b shuttle valve
LS return
manifold for multi valve => PVBZ-HD
B
T0
LS
A
T
Pp
11032961
P301 047
Versions and Code Numbers, PVBD Diverter, Multi Valve for PVBZ-HD
Symbol
Description PVB /PVBZ
B2
A
157B1503
B
T0
Code Numbers
ISO 6149 DIN 3851
M22 x 1.5
157B1501
M22 x 1.5
11027604
PVBD 6/2 shift valve.
Valve shifts between A1 & B1 / A2 & B2
Actuated with PVC solenoid, which is included
Port pressure max. 280 bar
B1
A1
Port Dimesions
PVC NC
12 VDC
14 bar
Connector type: AMP JPT 2 PIN
A2
Pp
P301 048
B
B
T0
LS
A
A
Multivalve for PVBZ 11032961
Valve shifts A-port between PVBZ A or tank
gallery, i.e. shifts between single and double
acting actuation.
B-port prepared for PVLP
Actuated with PVC solenoid, which is included.
Port Pressure max. 280 bar
PVC NC
12 VDC
14 bar
Connector type: AMP JPT 2 PIN
T
Pp
P301 049
22
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Versions and Code Numbers, PVBS Spools
Symbol
Description PVBS
5
Pressure compensated flow l/min
10
25
40
65
100
Standard FC-spools for PVBZ
(Electrical and Mechanical actuation)
Tension bar for PVM
Check valves in spool
4-way, 3-position
Deadband: 0,8 mm
For PVBZ with LS A/B shuttle
11051945 11019630 11019631 11019633 11019634 11019635
Standard FC -spools for PVBZ and PVBZ-HD
(Electrical and Mechanical actuation)
Tension bar for PVM
Check valve in spool
4-way, 4-position
Float >A>F
Deadband: 0,8 mm
For PVBZ with LS A/B shuttle
157B9415 157B9410 157B9411 157B9412 157B9413 157B9414
Standard FC float spools for PVBZ
(Electrical actuation)
Tension bar for PVML
Check valve in spool
4-way, 4-position
Float >A>F
Deadband: 0,8 mm
For PVBZ with LS A/B shuttle
157B9434
50/30
P -> B / B -> T
Standard FC spools for PVBZ-HS
(Electrical and Mechanical actuation)
Tension bar for PVM
3-way, 3-position
Deadband: 0,8 mm
75/50
100/65
11023550 11023551 11023552
PVM
Mechanical actuation with flow adjustable
screws without base, arm and button
V310058.A
11051935 • Rev AD • Mar 2012
23
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Versions and Code Numbers, PVE Recommendations
Symbol
Description PVE *
PVEH-F
Ratiometric proportional high
active fault monitoring
multivoltage 11-32, hysteresis: 4% rated
Float P>A>F by additional input signal.
Recommended use: PVB_ PVBZ with float spools.
Code Number
AMP
Deutsch
157B4338
PVEP-F
PWM proportional high
active fault monitoring
multivoltage 11-32, hysteresis: 5% rated
Float P>A>F by additional input signal.
Recommended use: PVB_ PVBZ with float spools.
PVED-CC
CanBus proportional high
programmable
multivoltage 11-32, hysteresis: ~ 0%
Recommended use: PVB_ PVBZ with float spools.
PVED-CC
CanBus proportional high
programmable
multivoltage 11-32, hysteresis: 4% rated
Recommended use:
PVBZ-HS or PVBZ-HD hitch valves
PVEP
Proportional actuation
active fault monitoring
* For further information see PVE series 4 Technical Information: 520L0553
24
11051935 • Rev AD • Mar 2012
157B4753
157B4943
157B4944
11026781
11015692
11034832
PVG 32 AG Modules - Metric Ports
Technical Information
Modules and Code Numbers
Versions and Code Numbers, End Plates are Compatible within the Metric Valve 32 Program
Symbol
Description PVS
PVS aluminum
Without active elements
No connections
V310062.A
PVS aluminum
Without active elements
LX connection
LX
Port Dimensions
Code Numbers
ISO
DIN
157B2000 157B2000
LX-port:M12x1.5
157B2913
V310063.A
PVSI steel
Without active elements
No connections
157B2014 157B2014
V310062.A
PVSI steel
Without active elements
LX connection
LX
LX-port:M12x1.5
157B2910
T-port:M22x1.5
11004462 157B2912
LXport:M14x1.5
T2port:M22x1.5
Ppport:M14x1.5
11050065
T0port:M14x1.5
157B2917
V310063.A
PVST steel
Without active elements
T-port
M8 for mounting
T
V310064.A
T P LS
Pp
T2
LX
LX on/off
Pp
T0
Pp
PVSI Steel
With pilot supply for electrical actuation
and pilot dump.
LX-connection
LX on/off
350 bar
12 VDC
V310060.A
LS P T
T0
PVSI Steel
350 bar
With pilot supply for electrical actuation
V310076.A
11051935 • Rev AD • Mar 2012
25
PVG 32 AG Modules - Metric Ports
Technical Information
Activation Characteristics
Float Spools, PVBZ
Characteristics; oil flow vs. spool travel and voltage
The spools have 5.5 mm spool travel in direction B and 7.5 mm travel in direction A:
• 5.5 mm spool displacement in direction A gives max. oil flow to port A
• 5.5 mm spool displacement in direction B gives max. oil flow to port B
• 7.5 mm spool displacement in direction A gives completely open float
position A/B → T
26
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Pressure Drop Characteristics
A/B → T at max. spool travel 5.5 mm (A or B) or 7.5 mm float position. Shown curves
are typical average values of return pressure drops on 1. Position in a PVBZ module
(157B5957) to the T-port (M27) on a PVPV inlet.
Pressure drop A/B →Pressure
T characteristic
for PVBS
and PVBS
157B9434
drop A/B
to T :1157B9414
PVBS 157B9414
&157B9434
30
28
26
Pressure drop A/B - T [bar]
24
22
A → T (5.5 mm)
20
18
16
A → T (float)
14
12
B → T (5.5 mm)
10
B → T (float)
8
6
4
2
0
0
10
20
30
40
50
60
70
80
90
100
110
Q (A/B) [l/min]
120
P301 087
Pressure drop
A/B157B9413
to T : PVBS 157B9413
Pressure drop A/B → T characteristic
for PVBS
50
45
Pressure drop A/B - T [bar]
Pressure Drop
Characteristics of Float
Spools
40
35
A → T (5.5 mm)
30
B → T (5.5 mm)
25
20
A → T (float)
15
B → T (float)
10
5
0
0
10
20
11051935 • Rev AD • Mar 2012
30
40
50
60
70
Q (A/B) [l/min]
80
90
100
110
120
P301 088
27
PVG 32 AG Modules - Metric Ports
Technical Information
Pressure Drop Characteristics
Pressure Drop
Characteristics of Float
Spools (continued)
Pressure drop A/B → T characteristic
for PVBS
Pressure drop
A/B157B9642
to T : PVBS 157B9642
60
A → T (5.5 mm)
55
Pressure drop A/B - T [bar]
50
45
B → T (5.5 mm)
40
35
30
25
20
A → T (float)
15
10
B → T (float)
5
0
0
10
20
30
40
50
60
70
80
90
100
110
Q (A/B) [l/min]
120
P301 089
Pressure drop A/B → T characteristic
PVBS
157B9411
Pressure for
drop
A/B
to T : PVBS 157B9411
25
Pressure drop A/B - T [bar]
A → T (5.5 mm)
20
B → T (5.5 mm)
15
10
A → T (float)
5
B → T (float)
0
0
10
20
30
40
Q (A/B) [l/min]
28
11051935 • Rev AD • Mar 2012
50
60
70
80
P301 090
PVG 32 AG Modules - Metric Ports
Technical Information
Pressure Drop Characteristics
Pressure drop A/B → T characteristic
for PVBS
Pressure drop
A/B157B9410
to T : PVBS 157B9410
25
A → T (5.5 mm)
B → T (5.5 mm)
Pressure drop A/B - T [bar]
20
15
10
5
A → T (float)
B → T (float)
0
0
10
20
30
40
50
Q (A/B) [l/min]
60
P301 091
Pressure drop
A/B157B9415
to T : PVBS 157B9415
Pressure drop A/B → T characteristic
for PVBS
50
45
A → T (5.5 mm)
40
Pressure drop A/B - T [bar]
Pressure Drop
Characteristics of Float
Spools (continued)
B → T (5.5 mm)
35
30
25
20
15
10
A → T (float)
5
B → T (float)
0
0
10
20
Q (A/B) [l/min]
11051935 • Rev AD • Mar 2012
30
40
P301 092
29
PVG 32 AG Modules - Metric Ports
Technical Information
Pressure Drop Characteristics
Single Acting Spools
Characteristics for
PVBZ-HS
3/3 spools for PVBZ-HS
3/3 spools characteristic
for PVBZ-HS
157B9411;
flow,and
spool
travel and voltage
Characteristics;
Oil flow,
spoolOil
travel
voltage
120
100L _11023552
100
Flow /l/min)
80
75 L _11023551
60
40
50 L _11023550
20
0
0
1
0.50
2
3
0.55
4
0.60
5
6
0.65
7
0.70
Spool travel
mm
Us
PVE
UDC
0.75
P301 093
B → T at max. spool travel 7.0 mm. Shown curves are typical average values of return
pressure drops on 1. Position in a PVBZ_HS module to the T-port (M27) on a PVPV inlet.
Pressure Drop
Characteristics
in Lower Mode Position,
Max. Spool Travel
Pressure drop BPressure
→ T characteristic
111023552
drop B tofor
T: PVBS
PVBS111023550,
11023550,111023551
11023551and
& 11023552
120
Pressure drop B - T [bar]
100
80
B → T (7 mm)
50 L _11023550
60
B → T (7 mm)
75 L _11023551
40
20
B → T (7 mm)
100L _11023551
0
0
30
10
20
11051935 • Rev AD • Mar 2012
30
40
50
60
Q (B) [l/min]
70
80
90
100
110
P301 097
PVG 32 AG Modules - Metric Ports
Technical Information
Pressure Drop Characteristics
Normally float spools as for PVBZ basic modules are recommended for the PVBZ-HD
solution. See activation characteristics on page 22.
Pressure drop characteristics for the PVBZ-HD valve are shown in the following example
using a 100l float spool code no.: 157B9414 at the respective spool travel and multi-valve
mode position.
Shown curves are typical average values of return pressure drops on 1. Position in a
PVBZ-HD module to the T-port (M27) on a PVPV inlet.
Pressure
B to T - PVBS
157B9414
Pressure drop B → T characteristic
for drop
PVBS 157B9414;
PVBZ-HD
double acting mode
PVBZ-HD Double acting mode
25
20
Pressure drop B - T [bar]
Spools Characteristics
for PVBZ-HD
B → T (5.5 mm)
15
10
5
0
0
10
20
30
40
50
60
Q (B) [l/min]
11051935 • Rev AD • Mar 2012
70
80
90
100
110
120
P301 098
31
PVG 32 AG Modules - Metric Ports
Technical Information
Pressure Drop Characteristics
pools Characteristics for
PVBZ-HD (continued)
Pressure drop A to T - PVBS 157B9414
Pressure drop A → T characteristic
for PVBSDouble
157B9414;
PVBZ-HD
double acting mode
PVBZ-HD
acting
mode
40
35
Pressure drop A - T [bar]
30
A → T (5.5 mm)
25
20
A → T (float)
15
10
5
0
0
10
20
30
40
50
60
70
80
90
100
110
Q (A) [l/min]
120
P301 099
Pressure drop A to T
PVBZ-HD
mode
Pressure drop A → T characteristic;
PVBZ-HDSingle
single acting
acting mode
120
110
100
PVBS
independently
Pressure drop A - T [bar]
90
80
70
60
50
40
30
20
10
0
0
10
20
30
40
50
60
Q (A) [l/min]
32
11051935 • Rev AD • Mar 2012
70
80
90
100
110
120
P301 100
PVG 32 AG Modules - Metric Ports
Technical Information
Dimensions and Schematic Examples
Drawings for 5-section
group
•
PVG 32: 5 section valve group, example with 1 Hitch double acting (PVBZ-HD), 1
Aux. valve PVBZ with PVBD diverter valve slice, 2 Aux. Valve PVBZ and 1 Aux. valve
PVB.
To be supplied with LS variable piston pump.
PVED-CC with APM-JPT connector.
•
•
A
B
A2
B2
A1
B1
A
B
A
B
A
B
T0
T02
LS
T T2
PVPV
11003806
P301 077
P P2
PVBZ-HD
11032961
11027604
11051935 • Rev AD • Mar 2012
PVBZ-PVBD
157B6958
157B1503
PVBZ
157B6957
PVBZ
157B6957
PVB
157B6850
PVS
157B2000
33
PVG 32 AG Modules - Metric Ports
Technical Information
Dimension and Schematic Examples
Drawings for 5-section
group
172
125,5
F
H
G
K
95
I
L
J
68
33,5
35
48
X
12
336
48
12
19,5
23
F: Port T2; M14 x 1.5
G: Port T0; M14 x 1.5
H: Port LS; M14 x 1.5
I: Port T02; M14 x 1.5
J:PVB A and B port;
M22 x 1.5
K:Fixing holes;
M8 x min. 10
L:PVBZ A and B port;
M22 x 1.5
M: Port P and T; M27 x 2.0
N: Port P2; M14 x 1.5
O:PVBZ-HD work port;
M22 x 1.5
P:PVBD work port;
4 x M22 x 1.5
140
172
View
X-X
X
P
N
37,5
38,5
69,3
38
34
34
36
89,6
46
62
95
302,6
P301 076
O
M
34
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Dimension and Schematic Examples
Drawings for 3-section
group
•
PVG 32: 3 section valve group, example with 1 Hitch single acting (PVBZ-HS) and 2
Aux. valve slices.
To be supplied with LS variable piston pump.
PVED-CC with Deutsch DT connector.
•
•
T
B
A
B
A
B
T0
T02
LS
T T2
P301 079
P P2
PVPV
11003806
11051935 • Rev AD • Mar 2012
PVBZ-HS
PVBZ
PVBZ
PVS
157B6968
157B6957
157B6957
157B2000
35
PVG 32 AG Modules - Metric Ports
Technical Information
Dimension and Schematic Examples
Drawings for 3-section
group
F
129,8
133,3
View
X-X
H
G
95
K
I
J
X
48
35
X
12
238
48
23
68
N
37,5
62
38,5
276
P301 078
L
F:
G: H:
I:
J:
36
Port T2; M14 x 1.5
Port T0; M14 x 1.5
Port LS; M14 x 1.5
Port T02; M14 x 1.5
Port A and B; M22 x 1.5
K:Fixing holes; M8 x min. 10
L:PVBZ-HS work port B and T;
M22 x 1.5
M: Port P and T; M27 x 2.0
N: Port P2; M14 x 1.5
11051935 • Rev AD • Mar 2012
M
PVG 32 AG Modules - Metric Ports
Technical Information
Dimension and Schematic Examples
Drawings for 2-section
group
•
•
PVG 32: 2 section valve group, typical example for Loader application for tractors.
To be supplied with fixed pump. The PVP inlet has HPCO feature, consequently the
PVT has tank port.
PVED-CC with APM-JPT connector.
•
A
B
A
B
T
PVEH
PVEH
T0
M
LS
HPCO
P301 081
P
PVP
157B5961
11051935 • Rev AD • Mar 2012
PVBZ
157B6957
PVBZ
157B6957
PVST
11004462
37
PVG 32 AG Modules - Metric Ports
Technical Information
Dimension and Schematic Examples
Drawings for 2-section
group
G
124,8
125,5
View
X-X
H
K
J
F
X
X
48
20,5
36,5
189
32
16
29
I
87,5
22,5
M
L
L
68
72,5
276
P301 080
Port assignment:
F: Port T; M22 x 1.5
G: Port T0; M14 x 1.5
H: Port LS; M14 x 1.5
I:Port M gauge; M14 x 1.5
J: Port A and B; M22 x 1.5
K:Fixing holes; M8 x min. 10
L:Port P & HPCO; M27 x 2.0
M: Pressure relief valve
38
11051935 • Rev AD • Mar 2012
PVG 32 AG Modules - Metric Ports
Technical Information
Order Specification
PVG 32
Order Specification
Specification Sheet
Subsidiary/Dealer
PVG No.
Customer
Customer No.
Application
Revision No.
Function
A-Port
0
157B
p=
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
a
157B
b
157B
Remarks
Filled in by
1
2
bar
157B
LSA
10
bar
157B
LSA
9
bar
157B
LSA
8
bar
157B
LSA
7
bar
157B
LSA
6
bar
157B
LSA
5
bar
157B
LSA
4
bar
157B
LSA
3
bar
157B
LSA
bar
157B
LSA
11
157B
12
157B
B-Port
157B
bar
157B
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
157B
13
157B
c
LSB
bar
157B
b
Date
PHYD-PVG32-3
Separate specification pads with 50 sheets are available under the literature no. 520L0515.
11051935 • Rev AD • Mar 2012
39
Products we offer:
• Bent Axis Motors
• Closed Circuit Axial Piston Pumps
and Motors
• Displays
• Electrohydraulic Power Steering
• Electrohydraulics
• Hydraulic Power Steering
Sauer-Danfoss is a global manufacturer and supplier of highquality hydraulic and electronic components. We specialize in
providing state-of-the-art technology and solutions that excel in
the harsh operating conditions of the mobile off-highway market.
Building on our extensive applications expertise, we work closely
with our customers to ensure exceptional performance for a broad
range of off-highway vehicles.
We help OEMs around the world speed up system development,
reduce costs and bring vehicles to market faster.
Sauer-Danfoss – Your Strongest Partner in Mobile Hydraulics.
• Integrated Systems
• Joysticks and Control Handles
• Microcontrollers and Software
Go to www.sauer-danfoss.com for further product information.
• Open Circuit Axial Piston Pumps
• Orbital Motors
• PLUS+1™ GUIDE
• Proportional Valves
• Sensors
• Steering
Wherever off-highway vehicles are at work, so is Sauer-Danfoss.
We offer expert worldwide support for our customers, ensuring
the best possible solutions for outstanding performance. And with
an extensive network of Global Service Partners, we also provide
comprehensive global service for all of our components.
• Transit Mixer Drives
Please contact the Sauer-Danfoss representative nearest you.
Members of the Sauer-Danfoss Group:
Local address:
Comatrol
www.comatrol.com
Schwarzmüller-Inverter
www.schwarzmueller-inverter.com
TurollaOCG
www.turollaocg.com
Valmova
www.valmova.com
Hydro-Gear
www.hydro-gear.com
Sauer-Danfoss-Daikin
www.sauer-danfoss-daikin.com
11051935 • Rev AD • Mar 2012
Sauer-Danfoss (US) Company
2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239 6000
Fax:
+1 515 239 6618
Sauer-Danfoss ApS
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444
Fax:
+45 7488 4400
Sauer-Danfoss GmbH & Co. OHG
Postfach 2460, D-24531 Neumünster
Krokamp 35, D-24539 Neumünster, Germany
Phone: +49 4321 871 0
Fax:
+49 4321 871 122
Sauer-Danfoss-Daikin LTD.
Shin-Osaka TERASAKI 3rd Bldg. 6F
1-5-28 Nishimiyahara, Yodogawa-ku
Osaka 532-0004, Japan
Phone: +81 6 6395 6066
Fax:
+81 6 6395 8585
www.sauer-danfoss.com