Download Framework

SESAM
Framework
Program version 3.5
20-DEC-2007
5-233
DISPLAY CODE-CHECK-RESULTS
...
...
CODE-CHECK-RESULTS run
ABOVE
limit
BELOW
limit
BETWEEN
limit1 limit2
loadcase
WORST-LOADCASE
...
MAX-USAGE-FACTOR
EACH-POSITION
...
PURPOSE:
Displays the usage factors for a code check (punch, yield, stability, member, cone or hydrostatic check) on
the members for a given run name.
PARAMETERS:
run
Run name.
loadcase
Selected load case.
WORST-LOADCASE
Worst load case within run for each member.
MAX-USAGE-FACTOR
Present only the maximum UF along the member.
EACH-POSITION
Present the UF calculated at each check position.
ABOVE
Present usage factors above the given limit.
BELOW
Present usage factors below the given limit.
BETWEEN
Present usage factors between the given limits.
limit / limit1 / limit2
Limit usage factor for display of numerical values on members.
NOTES:
For alternative ABOVE and BELOW: If the value of usage factor is greater than 1.0, the member will be
shown in red colour. If it is in between limit, and 1.0 it will be yellow, otherwise it will be green. Default
limit is 0.8 for ABOVE and 0.5 for BELOW.
For alternative BETWEEN: If the value of usage factor is greater than limit2, the member will be shown in
red colour. If it is in between limit1 and limit2 it will be yellow, otherwise it will be green. Default limits are
0.5 and 0.8.
It is also possible to use more than just three colours when displaying the results. See the command DEFINE
PRESENTATION DISPLAY.