1
Download StorEdge_3310_RAID_F..
Transcript
APPENDIX B Parameter Summary Tables This appendix lists the firmware parameter settings for both the FC and SCSI arrays. You can fine-tune your array by making changes to these settings. It also lists the parameter defaults that you should not change unless advised to by Technical Support. Topics covered include: B.1 ■ “Introducing Default Parameters” on page B-1 ■ “Basic Default Parameters” on page B-2 ■ “Default Configuration Parameters” on page B-3 ■ “Default Peripheral Device Parameters” on page B-9 ■ “Default System Functions” on page B-10 ■ “Keeping Specific Parameter Defaults” on page B-11 Introducing Default Parameters Although the factory defaults provide optimized controller operation, you may want to fine-tune your array through minor modifications to the following parameters listed. Some parameters can be changed only at the initial array configuration; other parameters may be changed at any time. Please note the listing of parameters defaults that should not be changed unless directed by Technical Support. Note – For customer convenience, these tables apply to both the Sun StorEdge 3310 SCSI array, using firmware version 3.25, and the Sun StorEdge 3510 FC array using firmware version 3.27. B-1
