Download Multifunction Programmable Controller User Manual AC

Chapter 9. – Modules
9.6.8
Analog Limiter
Description
This modules retransmits the input signal to the output, limiting it to a predefined range, set by you, through
the Parameter window.
You define the minimum and the maximum allowed value. When the signal exceed one of the two limits it is
clamped to them.
Module Symbol
IN
OUT
LMT
LMT_1
I:1
Input
IN
Input. Analog value in engineering units.
Parameters
TAG
This parameter indicates the name of the instance, as assigned by default
(module mnemonic) or entered by the user.
High Limit
High Limit. This is the maximum value the IN signal can reach; if it exceeds the
limit, the retransmitted OUT output is clamped to the threshold.
Analog value in engineering units.
Low Limit
Low Limit. This is the minimum value the IN signal can reach; if it exceeds the
limit, the retransmitted OUT output is clamped to the threshold.
Analog value in engineering units.
Output
OUT
Output. This output is continuously updated with the value on the IN signal,
limited to the range specified by the High and Low Limit.
Analog value in engineering units.
139