Download American Dryer Corp. ADE-30S User's Manual
Transcript
SUPER AD-30 Parts Manual 24 VAC Phase 5 1994 thru 2000 MODELS: ADG-30DS ADE-30S ADS-30S American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com 091701WM/mcronan ADC Part No. 450144 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE MODEL NO. SUPER AD-30 DISTRIBUTORS NAME Serial Number(s) Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Control Door Assembly Without Trim ...................................................................................................... 3 High Security Control Door Assembly ..................................................................................................... 4 Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5 Phase 5 OPL Microprocessor Control Panel Assembly .......................................................................... 6 Phase 5 OPL and Coin Microprocessor Control Box Assembly .............................................................. 7 Coin Vault Assembly .............................................................................................................................. 8 Dual Timer “Tap Touch” Controls ............................................................................................................ 9 Dual Timer Control Panel Assembly ...................................................................................................... 10 Dual Timer Control Box Assembly ........................................................................................................ 11 Non-Microprocessor Coin Meter Control Panel Assembly .................................................................... 12 Non-Microprocessor Coin Meter Control Box Assembly ...................................................................... 13 Slide Meter Case Assembly .................................................................................................................. 14 Slide Meter Control Box ....................................................................................................................... 15 Coin Meter Replacement Parts ............................................................................................................. 16 Lint Trap Assembly ............................................................................................................................... 17 Drop Lint Door Assembly Without Trim ................................................................................................ 18 Drop Lint Door Assembly ............................................................................................................... 19, 20 Main Door “Steel” Assembly ................................................................................................................ 21 Plastic Main Door Assembly ................................................................................................................. 22 Main Door Switch Assembly Cold Rolled Steel (CRS) Door ................................................................. 23 Plastic Main Door Switch Assembly ...................................................................................................... 24 Cold Rolled Steel (CRS) Door Front Panel ........................................................................................... 25 Plastic Door Front Panel Assembly ....................................................................................................... 26 Basket (Tumbler)/Support Assemblies ................................................................................................... 27 Basket (Tumbler) Bearing Assembly ................................................................................................ 28, 29 Idler Bearing Assembly ................................................................................................................... 30, 31 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ........................... 32, 33 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ................................... 34, 35 Sensor Bracket Assemblies ............................................................................................................. 36, 37 Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 38, 39 Electric Oven Assembly .................................................................................................................. 40, 41 Single-Phase (3ø) Motor, Electric Relay Panel Assembly ...................................................................... 42 3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 43 Microprocessor Reversing Rear Control Box Assembly ......................................................................... 44 Dual Timer Reversing Rear Control Box Assembly ................................................................................ 45 Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 46, 47 Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 48, 49 Sail Switch/Hi-Limit Assembly .............................................................................................................. 50 Outer Top/Back Guard Assembly ......................................................................................................... 51 Coin Acceptor Listing ........................................................................................................................... 52 Step Down Transformer Usage Listing for Gas/Steam Dryers ................................................................ 53 Transformer Usage Listing for Electric Dryers ........................................................................................ 54 Electric Oven Component Application Chart ......................................................................................... 55 Additional Parts Available ..................................................................................................................... 56 Control Door Assembly Without Trim 3 For OPL (Non-Coin) Models Mfd. as of July 19, 1999 Illus. No. Part No. Qty. 1 881053 870011 883097* 1 1 1 883120 1 117604 150300 102603 102601 102502 882541 4 4 1 1 1 2 2 3 4 5 6 7 8 * Description ADC Logo ONLY (with double adhesive tape) Logo Double Adhesive Tape Kit ONLY Control Door (includes illus. nos. 2 and 3) Stainless Steel Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Spring Turn Latch Assembly Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 High Security Control Door Assembly For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, 1999 Illus. No. 1 2 3 4* 5 6 7 8 9 10 11 * Part No. Qty. 160015 1 160104 160017 1 1 160016 881053 1 1 881052 1 870011 800023 1 1 800140 1 180200 117603 150201 150300 102600 102601 102502 1 3 5 4 1 1 1 Description High Security MK-100 Lock Assembly with Key (for Coin Models Only) MK-100 Key ONLY Special Dummy Lock ONLY (for Non-Coin Models Only) Lock Cam ONLY ADC Logo with Tape (for ALL Coin Models Only) Metal ADC Logo with Tape (for ALL OPL Models Only) Logo Double Tape Kit ONLY High Security Control Door Assembly less Lock (includes illus. nos. 4 through 7) High Security Stainless Steel Control Door Assembly Less Lock (includes illus. nos. 4 through 7) Top Trim with Lock Hole Trim Bumper Gasket (sold by the foot) #10-32 x 1/4" Phillips Round Head Machine Screw #10 x 1/2" Hex Washer TEK Screw Control Door Support Rod Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 * Part No. Qty. 112526 801213 1 1 801229 1 801259 801258 150309 137213 824998 153010 150005 --------- 1 1 1 1 1 2 2 1 137056 137023 137021 880772 824080 122800 136048 1* 1* 3* 1 1 1 1 Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4 through 6, and 11) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4 through 6, and 11) Coin Control Panel ONLY Coin Control Panel with Battery Bracket #10-16 x 1/2" Hex Head TEK Crimptite Screw Phase 5 Coin Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4" Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptor Listing on page 52) Optic Switch ONLY Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo Blo) Fuse For Dual Coin Models double the quantity. IMPORTANT: Check label on computer chip to verify correct part number for controller. Telephone: (508) 678-9000 Fax: (508) 678-9447 6 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 Part No. Qty. 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150309 136048 1 1 1 2 2 1 1 Description OPL English Keyboard Label Assembly OPL Stick-on Labels (English Only)...Not Illustrated OPL Stick-on Labels (Spanish, Italian, and Hebrew)...Not Illustrated 3-Language OPL Stick-on Labels (English, Spanish, and Hebrew)...Not Illustrated 5-Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6 and 7) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6 and 7) Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 3/4" Phillips Round Head Machine Screw #10-16 x 1/2" Hex Head TEK Crimptite Screw 1/8-Amp (Slo Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 5 OPL and Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. 1 --------- 1 2 3 4 5 6 7 8 9 10 11 150300 120715 150002 151000 136057 150301 136008 122641 122706 131931 2 1 2 2 * * * 1 * 1 12 13 150309 137035 2 1 14 323583 1 15 16 150300 132002 2 1 17 150300 2 * 7 Description Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) #10 x 1/2" Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1" Slotted Round Head Machine Screw #6-32 Pal Nut 1/2-Amp (Slo Blo) Fuse #8 x 7/16" Phillips Pan Head TEK Screw Fuse Block/Strip ONLY 15-Pin Microprocessor Connector Socket Steam Valve Relay - 24 VAC (for Mechanical Steam Damper Models Only) #10-16 x 1/2" Hex Head TEK Crimptite Screw Motor Capacitor (for Mechanical Steam Damper Models Only) Capacitor Bracket (for Mechanical Steam Damper Models Only) #10 x 1/2" Hex Washer TEK Screw Transformer (for Mechanical Steam Damper with 208 volt and higher models) #10 x 1/2" Hex Washer TEK Screw As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 Coin Vault Assembly Illus. No. 1 Qty. 802112 1 802117 802110 1 1 4 802115 160006 875061 160105* 802020 1 1 1 1 1 5 802019 125915 802018 1 1 1 6 7 8 9 152014 102502 102601 102600 4 1 1 1 2 3 * Part No. Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Face Plate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Face Plate Assembly (includes illus. nos. 2 through 5) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Dual Timer “Tap Touch” Controls 9 For Models Mfd. as of November 1, 2000 Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 824298 824299 824175 122301 131932 120730 151000 882903 1 1 1 1 3 1 6 1 9 10 11 12 13 14 15 850392 153010 152000 150207 150110 112563 124104 124105 2 3 2 4 1 1 1 Telephone: (508) 678-9000 Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer Fax: (508) 678-9447 10 Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000 Illus. No. Part No. Qty. 1 2 3 123005 122400 824015 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 800051 131917 150207 154001 152000 153010 120713 150002 150110 150001 131931 151000 112050 150309 1 1 2 2 2 2 1 2 4 2 1 2 1 1 160005 1 124103 124025 124030 122602 122700 122801 2 1 1 1 8 1 17 18 19 20 21 --- American Dryer Corporation Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-to-Start Relay - 24 VAC #10-24 x 1/2" Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 18-Position Terminal Block #6-32 x 1" Round Head Machine Screw #8-32 x 1/4" Phillips Machine Screw #6-32 x 1/2" Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY #10-16 x 1/2" Hex Head TEK Crimptite Screw (for models mfd. as of March 1, 1994) 2-Piece Spring Turn Latch (for models mfd. as of March 1, 1994) Arrow Timer - 24 VAC 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool 88 Currant Road / Fall River, MA 02720-4781 11 Dual Timer Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 122603 122701 122801 315010 150300 150300 --------- 1 9 1 1 2 2 1 7 8 150309 131931 2 1 9 10** 11 12 13 14 15 136008 136057 150301 150002 120715 151000 132002 * * * 2 1 2 1 16 150300 2 Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2" Hex Washer TEK Screw #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) #10-16 x 1/2" Hex Head TEK Crimptite Screw Steam Valve Relay - 24 VAC (for Mechanical Steam Damper Models Only) Fuse Block/Strip ONLY 1/2-Amp (Slo Blo) Fuse #8 x 7/16" Phillips Pan Head TEK Screw #6-32 x 1" Slotted Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut Transformer (for Mechanical Steam Damper with 208 volt and higher models) #10 x 1/2" Hex Washer TEK Screw * As required. ** Check fusing on dryer for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 12 Illus. No. * Non-Microprocessor Coin Meter Control Panel Assembly Part No. Qty. 1 2 3 123005 122400 824020 1 1 1 4 5 6 7* 8 800054 131917 150207 154001 125601 153010 1 1 2 2 1 2 9 152016 2 150303 2 10 11 120712 150309 160005 1 1 1 12 13 -- 122602 122700 122801 1 9 1 Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel ONLY Push-to-Start Relay - 24 VAC #10-24 x 1/2" Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter - 24 VAC (specify timing) #6 Star Washer (for models mfd. as of December 11, 1998) #4-40 Hex Nut (for models mfd. as of December 11, 1998) #4 x 3/4" Pan Head "A" Screw...Not Illustrated (for models mfd. prior to December 11, 1998) 12-Position Terminal Block #10-16 x 1/2" Hex Head TEK Crimptite Screw 2-Piece Spring Turn Latch (used on models mfd. prior to March 1, 1994) 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Consult factory for coin meters not listed. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 13 Non-Microprocessor Coin Meter Control Box Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 122603 122701 122801 315010 150300 150300 --------- 1 9 1 1 2 2 1 7 8 150309 131931 2 1 9 10** 11 12 13 14 15 136008 136057 150301 150002 120715 151000 132002 * * * 2 1 2 1 16 150300 2 Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2" Hex Washer TEK Screw #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) #10-16 x 1/2" Hex Head TEK Crimptite Screw Steam Valve Relay - 24 VAC (for Mechanical Steam Damper Models Only) Fuse Block/Strip ONLY 1/2 Amp (Slo Blo) Fuse #8 x 7/16" Phillips Pan Head TEK Screw #6-32 x 1" Slotted Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut Transformer (for Mechanical Steam Damper with 208 volt and higher models) #10 x 1/2" Hex Washer TEK Screw * As required. ** Check fusing on dryer for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 14 Slide Meter Case Assembly MAN1625 Illus. No. * Part No. Qty. 1* 2 3 4 5 6 7 160199 160099 125908 152014 125900 154203 801700 1 1 1 4 1 6 1 8 9 10 11 12 13 14 15 16 17 315404 ----------------801701 102502 102601 102600 122400 123005 131917 1 1 1 1 1 1 1 1 1 1 Description Key ONLY for Slide Meter Lock Lock/Key/Cam and Hardware Slide Meter Accumulator - 24 VAC 1/4-20 Free Spin Wash Nut Slide Meter Case ONLY with Door Less Locks 1/4" Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 7 and 8) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch Rocker Heat Selector Switch Red Indicator Light - 24 VAC Push to-Start Relay - 24 VAC Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 15 Slide Meter Control Box Illus. No. Part No. Qty. 1 2 3 4 5 132451 150299 824828 150300 --------- 1 2 1 2 1 6 7 8 9 10 11 --- 136057 150301 136008 150002 120715 151000 322809 150301 * * * 2 1 2 1 4 * Description 2-Pole Contactor - 24 VAC #10 x 1" Hex Head Screw RC Network with Connectors #10 x 1/2" Hex Washer TEK Screw 24 VAC Control Voltage Transformer (refer to Transformer Usage Listings on page 53 and page 54) 1/2 Amp (Slo-Blo) Fuse #8 x 7/16" Phillips Pan Head TEK Screw Fuse Block/Strip ONLY #6-32 x 1" Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 16 Illus. No. 1 2 3 4 Coin Meter Replacement Parts Part No. 125541 125540 125500 125501 125502 125503 125504 125506 125507 125508 125510 125515 125516 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 2 American Dryer Corporation Description 1/60 RPM - 60 Hz Meter Motor - 24 VAC 1/30 RPM - 50 Hz Meter Motor - 24 VAC 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch "B" with Arm Meter Switch "A" or "C" 88 Currant Road / Fall River, MA 02720-4781 17 Lint Trap Assembly Illus. No. Part No. Qty. 1 880914 1 2 3 4 5 6 7 - 880913 154200 150300 304100 800500 150419 108120 150418 1 7 3 1 2 2 1 1 Telephone: (508) 678-9000 Description Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Trap ONLY 5/32" Pop Rivet #10 x 1/2" Hex Washer TEK Screw Lint Screen Hold Down Lint Screen ONLY #6 x 1/2" Tamperproof TEK Screw Chain For Drop Lint Door Tamperproof Screw Hand Driver Fax: (508) 678-9447 18 Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 19, 1999 Illus. No. Part. No. Qty. Description 800150 1 160001 1 160103 160003 1 1 160104 1 2 160008 160009 150425 1 1 1 3 4 157000 883098 1 1 5 6 7 - 117604 150419 108120 150418 7 2 1 1 Knob Latch Kit Assembly (includes illus. nos. 1 and 2) AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY (for dummy lock) Lock Cam For AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8" Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 and 5) Neoprene Sponge Tape (sold by the foot) #6 x 1/2" Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2" length) Tamperproof Screw Hand Driver 1 * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Drop Lint Door Assembly 19 For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, 1999 Telephone: (508) 678-9000 Fax: (508) 678-9447 20 Illus. No. 1 Part No. Qty. 160001 160103 800150 1 1 1 160003 1 160104 160008 160009 1 1 1 150425 1 157000 800216* 1 1 800233* 1 800240 150201 117604 1 10 7 117600 7 7 117603 3 8 9 180210 150419 150418 108120 2 2 1 1 2 3 4 5 6 10 * Drop Lint Door Assembly Description AD-100 Lock Assembly with Key AD-100 Key ONLY Knob Latch Kit Assembly (for non-coin models Only) (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam for AD-100 Lock Knob Latch Adjustable Cam (for non-coin models Only) #12-24 x 3/8" Round Head Machine Screw (for knob latch adjustable cam) Drop Lint Door Spring Drop Lint Door Assembly (includes illus. nos. 4 through 8) Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Drop Lint Door Assembly #10-32 x 1/4" Phillips Pan Head Machine Screw Neoprene Sponge Tape (sold by the foot) (for models mfd. as of August 6, 1998) Noise Suppressor Tape (sold by the foot) (for models mfd. prior to August 6, 1998) Suppressor Tape/Gasket (sold by the foot) (for models mfd. as of February 8, 1995) Trim/Kick Plate (31-1/8" length) #6 x 1/2" Tamperproof Screw Tamperproof Screw Hand Driver Chain For Drop Lint Door Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Main Door "Steel" Assembly 21 For OPL Models ONLY Mfd. as of November 3, 2000 Illus. No. Part No. Qty. 1 881150 1 2 3 102354 170730 170731 881152 1 1 1 1 4 5 6 150445 153031 881151 2 1 1 7 150445 150443 150683 152014 151010 150120 150683 152014 881210 102218 102360 2 2 3 3 1 1 3 3 1 1 1 170731 1 151013 4 8 9 10 11 12 13 14 15 16 Telephone: (508) 678-9000 Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4" Black Cap Head Setscrew 1/4" Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) 1/4-20 x 3/4" Black Cap Head Setscrew 1/4-20 x 3/4" Stainless Steel Cap Head Setscrew 1/4-20 x 5/8" Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8" Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY 20-7/16" Door Glass Glass/Door Gasket Tape (for models mfd. as of February 9, 2001) Black Glass Adhesive (10.3 oz. cartridge) (for models mfd. prior to February 9, 2001) #10-32 Black Nylon Acorn Nut Fax: (508) 678-9447 22 Plastic Main Door Assembly For OPL and ALL Coin Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. 1 881421 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 4 4 1 1 1 1 4 4 1 7 8 9 American Dryer Corporation Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2" Stainless Steel Main Door Hinge Assembly #10-24 x 3/8" Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16" Door Glass with (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) 1/2" Stainless Steel Flat Head Allen Screw Door Glass (Nylon) Spacer Main Door Latch Screw (#10 x 7/16" Dome Hex Head) 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Assembly Cold Rolled Steel (CRS) Door 23 For OPL Models ONLY Mfd. as of November 3, 2000 Illus. No. 1 2 3 4 5 6 7 Part No. 153566 152013 153010 137005 122636 881211 150301 Qty. 2 2 2 1 2 1 2 Telephone: (508) 678-9000 Description #6-32 x 7/8" Clinch Stud #6-32 Hex Nut 1/4" ATF Zinc Plated #6 Star Washer Single-Pole Door Switch (SDS) Flag Terminal Main Door Switch Housing #8-18 x 7/16" Phillips Pan Head TEK Screw Fax: (508) 678-9447 24 Plastic Main Door Switch Assembly For OPL and ALL Coin Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. 1 2 3 4 5 6 152013 153008 137005 121028 154281 800448 2 2 1 2 2 1 7 8 9 10 153565 881246 150201 121405 2 1 2 1 American Dryer Corporation Description #6-32 Hex Nut #6 Lock Washer Single Pole Door Switch Insulated Female Terminal 3/8" Standard Nylon Spacers 12-1/2" Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6 Stud Main Door Switch Housing ONLY #10-32 x 1 / 4" Phillips Pan Head Screw Rubber Grommet 88 Currant Road / Fall River, MA 02720-4781 25 Cold Rolled Steel (CRS) Door Front Panel For OPL Models ONLY Mfd. as of November 3, 2000 Illus. No. Part No. Qty. 1 881268* 1 881287 1 881793* 1 154215 170330 150300 150309 881152 881208 150445 150443 881151 881209 2 1 1 8 1 1 4 4 1 1 2 3 4 5 6 7 8 * Description Right Hand Front Panel Assembly (CRS door) (includes illus. nos. 1 through 3) Stainless Steel Front Panel Assembly (CRS door) (includes illus. nos. 1 through 3) Left Hand Front Panel Assembly (CRS door) (includes illus. nos. 1 through 3) 1/8 Pop Rivet Friction Door Latch #10-16 x 1/2" Hex Washer TEK Screw #10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly 1/4-20 x 7/8" Black Cap Head Setscrew 1/4-20 x 7/8" Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Assembly Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 26 Plastic Door Front Panel Assembly For OPL and ALL Coin Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. 1 875300* 1 875311 1 154215 170330 150309 121405 2 1 9 1 2 3 4 5 * Description Right Hand Insulated Front Panel Assembly (Latch Type) Complete (includes illus. nos. 1 through 3 and 6) Stainless Steel Right Hand Insulated Front Panel Assembly (Latch Type) Complete (includes illus. nos. 1 through 3 and 5) 1/8" Pop Rivet Friction Door Latch #10-16 x 1/2" Hex Head TEK Crimptite Screw Rubber Grommet Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 27 Basket (Tumbler)/Support Assemblies Illus. No. 1* 2 3 4 5 6 7 8 9 10 11 --* Part No. Qty. 800703 800803 1 1 800813 1 150309 301304 150518 100915 153004 800603 850049 152005 153005 153004 116002 401010 40 4 1 4 4 1 1 4 4 4 1 1 Description Basket (Tumbler) ONLY (without Felt Collar) Non-Reversing Basket (Tumbler) and Support Assembly (includes illus. nos. 1 through 10) Reversing Basket (Tumbler) and Support Assembly (includes illus. nos. 1 through 10) #10-16 x 1/2" Hex Head TEK Crimptite Screw Basket (Tumbler) Rib ONLY 5/16-18 x 3/8" Socket Button Head Screw 3/8-16 x 31" Tie Rod 3/8" Flat Washer Non-Reversing Basket (Tumbler) Support ONLY Reversing Basket (Tumbler) Support ONLY 3/8-16 Hex Nut 3/8" Lock Washer 3/8" Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube) Felt collar is not included and must be ordered separately. NOTE: For stainless steel basket (tumblers), contact factory. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Basket (Tumbler) Bearing Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler) Bearing Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Qty. 880203 153005 152005 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1 801103 1 17 18 801105 801104 880779 1 1 1 19 20 21 880202 152004 150610 101100 1 2 2 1 101118 1 101119 1 100735 154301 100713 100108 1 2 1 1 100106 1 824807 1 22 23 24 25 * Part No. 29 Description 1-3/8" Flange Bearing 3/8" Lock Washer 3/8-16 Hex Nut 3/8-16 x 3/4" Hex Head Machine Bolt 3/8" Lock Washer 3/8-16 Hex Nut 3/8-16 x 1-1/2" Hex Head Machine Bolt 3/8" Flat Washer 3/8" Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4" Hex Head Machine Bolt 5/16" Lock Washer 5/16" Flat Washer 5/16-18 x 1-1/2" Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8" Bearing Box Assembly Complete (includes illus. nos. 4 through 20) (for models mfd. without Rotational Sensor) 1-3/8" Bearing Box and Support ONLY (includes illus. nos. 4 through 6, 16 and 17) 1-3/8" Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8" Pillow Block Bearing Assembly with Magnet (for models mfd. with Rotational Sensor) 1-3/8" Pillow Block Bearing 5/16-18 Hex Nut 5/16-18 x 1-1/2" Allen Setscrew 18" Pulley (for Non-Reversing Models Only) 18-3/4" Pulley (for Reversing Models Only) 1-3/8" Taper Lock Hub (for Reversing models Only) Shaft Key (for taper lock hub) 5/16-18 x 5/16" Allen Setscrew 1/4" x 1/4" x 7/8" Key 5L-680 V-Belt (basket [tumbler] to idler) (for Non-Reversing Models Only) 5L-680 V-Belt (basket [tumbler] to idler) (for Reversing Models Only) Rotational Sensor Assembly As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 American Dryer Corporation Idler Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 31 Idler Bearing Assembly Illus. No. 1 Part No. Qty. 100107 1 100108 1 100106 1 101129 100110 1 1 100103 1 100109 1 100117 1 4 5 6 7 8 9 10 11 154301 100705 301850 150529 100214 153007 152002 801007 2 1 1 3 2 3 3 1 12 13 14 15 16 17 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 2 3 Telephone: (508) 678-9000 Description 5L-670 V-Belt (idler to basket [tumbler]) (for Non-Reversing models Only) (for models mfd. as of November 21, 1997) 5L-680 V-Belt (idler to basket [tumbler]) (for Non-Reversing models Only) (for models mfd. between October 27, 1997 and November 21, 1997) 5L-690 V-Belt (idler to basket [tumbler]) (for Reversing models Only) (for models mfd. prior to October 27, 1997) 9" x 2-1/2" Compound Pulley 4L-500 V-Belt (idler to motor) 60 Hz ONLY (for Non-Reversing Models Only) 4L-510 V-Belt (idler to motor) 50 Hz ONLY (for Non-Reversing Models Only) 4L-650 V-Belt (idler to motor) 50/60 Hz (for Reversing Models Only) (for models mfd. as of October 27, 1997) 4L-620 V-Belt (idler to motor) 50/60 Hz (for Reversing Models Only) (for models mfd. prior to October 27, 1997) 5/16-18 x 5/16" Allen Setscrew 3/16" x 3/16" x 1-3/8" Key 5/8" x 3/4" Idler Shaft 1/4-20 x 2-1/4" Carriage Bolt 5/8" Flange Bearing 1/ 4" Lock Washer 1/ 4-20 Hex Nut Idler Bearing Assembly Complete (includes illus. nos. 5 through 17) 3/8-16 x 1" Hex Head Machine Bolt 3/8" Lock Washer 3/8" Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3" Hex Head Machine Bolt Fax: (508) 678-9447 32 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. Part No. Qty. 1 100110 100103 100701 101132 101133 150501 153002 153001 100073* 100076 122701 122801 137030 152004 153002 153001 117604 1 1 1 1 1 4 4 4 1 1 8 1 1 4 4 4 4 117600 4 154000 800919 4 1 880915* 1 880944 1 880946* 1 880945* 1 153050 100603 100702 153050 152006 120200 100075 3 1 1 1 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 * 33 Description 4L-500 V-Belt (motor to idler assembly) 60 Hz ONLY 4L-510 V-Belt (motor to idler assembly) 50 Hz ONLY 3/16" x 3/16" x 1" Key 5/8" x 2" Motor Pulley (for 60 Hz motors Only) 5/8" x 2-1/4" Motor Pulley (for 50 Hz motors Only) 5/16-18 x 3/4" Hex Head Machine Bolt 5/16" Lock Washer 5/16" Flat Washer 1 HP 120-230v / 1ø / 60 Hz T.E.F.C. Motor (plug type motor) 3/4 HP 240v / 1ø / 50 Hz T.E.F.C. Motor (plug type motor) Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16" Lock Washer 5/16" Flat Washer Neoprene Sponge Tape (sold by the foot) (for models mfd. as of August 6, 1998) Noise Suppressor Tape (sold by the foot) (for models mfd. prior to August 6, 1998) 5/16-18 Tinnerman Nut 1 HP Motor Mount ONLY - 56Z Frame (includes illus. no. 13) 1 HP 120-230v / 1ø / 60 Hz T.E.F.C. Motor Mount with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 3/4 HP 240v / 1ø / 50 Hz T.E.F.C. Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1 HP 208/230/380/460v / 3ø / 60 Hz T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 3 through 6 and 13 through 22) 1 HP 208/230/380/460v / 3ø / 50 Hz T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 3 through 6 and 13 through 22) 1/2" S.A.E. Flat Washer 16" Impellor with 3/4" Bore 1/8" x 1/8" x 1-1/2" Key 1/2" S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8" x 90° Connector 1 HP 208/230/380/460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame) Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 34 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. 1 2 3 4 5* 6 7 8 9* 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 * Part No. Qty. 100109 1 100117 1 100701 101132 101133 120200 181003 150501 153002 153001 100075 120200 150501 153002 153001 154000 152004 153002 153001 882398 1 1 1 1 1 4 4 4 1 1 4 4 4 8 4 4 4 1 880948* 1 880947* 1 117604 5 117600 5 153050 100702 100603 153050 152006 3 1 1 1 2 35 Description 4L-650 V-Belt (motor to idler assembly) (for models mfd. as of October 27, 1997) 4L-620 V-Belt (motor to idler assembly) (for models mfd. prior to October 27, 1997) 3/16" x 3/16" x 1" Key 5/8" x 2" Motor Pulley (for 60 Hz motors Only) 5/8" x 2-1/4" Motor Pulley (for 50 Hz motors Only) 3/8" x 90° Connector 1/2 HP 208/230/380/460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame) 5/16-18 x 3/4" Hex Head Machine Bolt 5/16" Lock Washer 5/16" Flat Washer 1 HP 208/230/380/ 460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame) 3/8" x 90° Connector 5/16-18 x 3/4" Hex Head Machine Bolt 5/16" Lock Washer 5/16" Flat Washer 5/16" Tinnerman 5/16"-18 Hex Nut 5/16" Lock Washer 5/16" Flat Washer Reversing Motor Mount - 56Z Frame (includes illus. no. 19) Reversing T.E.F.C. Motor Mount Assembly Complete - 60 Hz ONLY (includes illus. nos. 2 through 14 and 18 through 24) Reversing T.E.F.C. Motor Mount Assembly Complete - 50 Hz ONLY (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) (for models mfd. as of August 6, 1998) Noise Suppressor Tape (sold by the foot) (for models mfd. prior to August 6, 1998) 1/2" S.A.E. Flat Washer 1/8" x 1/8" x 1-1/2" Key 16" Impellor with 3/4 Bore 1/2" S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 36 Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly Non-Computer Sensor Bracket Assembly MAN0238 Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 7 8 9 10 130103 153010 152000 121028 122701 122605 154007 150005 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 305007 122604 122700 150301 150005 130111 1 1 4 2 * 1 130100 1 American Dryer Corporation Description 1/4" Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4" Tinnerman Push On Fastener #6-32 x 1/ 4" Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16" Phillips Pan Head TEK Screw #6-32 x 1/4" Round Head Machine Screw 130° Large Thermostat (for models mfd. as of August 1, 1993) 150° Large Thermostat (for models mfd. prior to August 1, 1993) 88 Currant Road / Fall River, MA 02720-4781 Sensor Bracket Assemblies (continued) Illus. No. 16 Part No. Qty. 130100 1 130103 1 17 130103 1 18 130101 1 130106 1 153010 152000 840065 * * 1 840063 1 121028 122701 122605 ** *** 1 122609 1 831702 1 801405 1 801418 1 801430 1 305007 122608 1 1 122604 1 122700 122801 150301 *** 1 2 19 20 21 22 23 24 25 26 27 28 37 Description 150° Large Thermostat (for models mfd. as of August 1, 1993) 225° Large Automatic Thermostat (for models mfd. prior to August 1, 1993) 225° Large Automatic Reset Thermostat (for ALL models mfd. as of August 1, 1993) 180° Large Thermostat (for models mfd. prior to April 22, 1994) 170° Large Thermostat (for models mfd. as of April 22, 1994) #6 Star Washer #6-32 Hex Nut Sensor Jumper (4) (for ALL models mfd. as of August 1, 1993) Sensor Jumper (3) ONLY (for models mfd. prior to August 1, 1993) Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY (for ALL models mfd. as of August 1, 1993) 3-Pin Socket Connector ONLY (for models mfd. prior to August 1, 1993) Sensor (4) Bracket Harness Assembly (includes illus. nos. 22 through 24) (for ALL models mfd. as of August 1, 1993) Non-Computer Sensor (3) Bracket Assembly Complete-includes Thermostats (includes illus. nos. 14 through 16 and 18 through 25) (for models mfd. prior to August 1, 1993) Non-Computer Sensor (4) Bracket Assembly Complete-includes Thermostats (includes illus. nos. 14 through 25) (for models mfd. from August 1, 1993 to April 22, 1994) Non-Computer Sensor (4) Bracket Assembly Complete-includes Thermostats (includes illus. nos. 14 through 25) (for models mfd. as of April 4, 1994) Universal Sensor Bracket ONLY 3-Pin Connector ONLY (for models mfd. prior to August 1, 1993) 4-Pin Connector ONLY (for ALL models mfd. as of August 1, 1993) Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16" Phillips Pan Head TEK Screw * Qty= 4 or 5 ** Qty= 5 or 8 *** Qty= 3 or 4 Telephone: (508) 678-9000 Fax: (508) 678-9447 38 American Dryer Corporation Direct Spark Ignition (DSI) Burner Assembly 88 Currant Road / Fall River, MA 02720-4781 39 Direct Spark Ignition (DSI) Burner Assembly Illus. No. Part No. Qty. 1 2 3 4 318030 150300 150309 128915 880134 1 2 2 1 1 5 6 7 8 9 10* 880330 150103 153000 151001 141105 140823 140820 140808 140806 141232 318700 150300 128927 880960 140411 318712 150309 881367 142809 150299 880815 850898 1 3 3 3 3 3 3 3 3 1 1 2 1 1 1 1 4 1 1 2 1 1 850852 1 809627** 809628** 880928** 880929** 1 1 1 1 11 12 13 14 15 16 17 18 19 20 21 --------- Description DSI (Direct Spark Ignition) Burner Shield #10 x 1/2" Hex Washer TEK Screw #10-16 x 1/2" Hex Head TEK Crimptite Screw DSI Ignitor/Flame-Probe Assembly Ignitor/Flame-Probe Kit Assembly (includes illus. nos. 4 and 5) High Voltage (HV) Wire and Connector Assembly #8-32 x 3/4" Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner #26 Natural Gas Burner Orifice - 60 Hz ONLY #29 Natural Gas Burner Orifice - 50 Hz ONLY #44 Liquid Propane (L.P.) Gas Burner Orifice - 60 Hz ONLY #46 L.P. Gas Burner Orifice - 50 Hz ONLY 1/2" DSI Manifold (3-Port) Pipe Bracket (bent) #10 x 1/2" Hex Washer TEK Screw 1/2" 24 VAC Redundant (natural gas) Gas Valve 1/2" 24 VAC Redundant (L.P. gas) Gas Valve 1/2" Valve L.P. Conversion Kit GV Pipe Bracket #10-16 x 1/2" Hex Head TEK Crimptite Screw 1/2" Union Shut Off with Tail Piece 1/2" x 29-1/8" Pipe #10 x 1" Hex Washer TEK Screw ADC DSI Module ONLY (50/60 Hz) Non-Heat Reclaimer Burner Box ONLY (for models mfd. as of November 17, 1997) Non-Heat Reclaimer Burner Box ONLY (for models mfd. prior to November 17, 1997) SUPER AD-30 Natural Gas Burner Assembly Complete less Orifices SUPER AD-30 L.P. Gas Burner Assembly Complete less Orifices SUPER AD-30 L.P. Conversion Kit (for 60 Hz models) SUPER AD-30 L.P. Conversion Kit (for 50 HZ models) * Contact factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 40 Electric Oven Assembly ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 41 Electric Oven Assembly Illus. No. Part No. Qty. 1 803007* ---------* ---------* 150300 802800 802801 1 1 2 1 1 154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150402 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011* ---------* 153009 320607 150402 1 2 1 1 2 1 1 1 2 1 1 2 1 2 1 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10 x 1/2" Hex Washer TEK Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2" Hex Head TEK Crimptite Screw Sail Switch Box Cover ONLY Sail Switch #4 x 3/4" Pan Head "A" Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8" Push On Fastener #10 x 1/2" Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 5/8" Slotted Truss Head Machine Screw 290° Hi-Limit #10 x 1/2" Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5 / 8" Slotted Truss Head Machine Screw Refer to Electric Oven Component Application Chart on page 55. Telephone: (508) 678-9000 Fax: (508) 678-9447 42 Illus. No. Single-Phase (1ø) Motor, Electric Relay Panel Assembly Part No. Qty. 1 2 3 132451 150299 824828 1 2 1 - 322809 150301 1 4 American Dryer Corporation Description 2-Pole Contactor - 24 VAC #10 x 1" Hex Head Screw RC Network with Connectors (for microprocessor [computer] controlled models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated 88 Currant Road / Fall River, MA 02720-4781 43 3-Phase (3ø) Motor, Electric Relay Panel Assembly Illus. No. 1 2 Part No. Qty. 322812 132430 1 1 132432 1 3 4 5 6 7 8 9 10 11 12 13 150103 151001 153002 152004 120701 150008 151000 121300 137015 150300 --------- 2 2 1 1 1 2 2 3 1 2 - ----- 322809 150301 1 4 Telephone: (508) 678-9000 Description Back Electrical Box Component Plate Impellor Contactor - 24 VAC (208/230/240v - 50/60 Hz ) Impellor Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4" Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing RC Filter (for microprocessor [computer] controlled models Only) #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated Fax: (508) 678-9447 44 Illus. No. 1 2 3 4 Microprocessor Reversing Rear Control Box Assembly Part No. Qty. 322812 137060 137013 132431 1 1 4 1 132432 1 150103 151001 153002 152004 132430 2 2 1 1 1 132432 1 10 11 12 13 14 15 16 17 150103 151001 120701 150008 151000 121300 150300 --------- 2 2 1 2 2 3 2 - ----- 322809 150301 1 4 5 6 7 8 9 American Dryer Corporation Description Back Electrical Box Component Plate Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor - 24 VAC (208/230/240v - 50/60 Hz) Reversing Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut Impellor Contactor - 24 VAC (208/230/240v - 50/60 Hz ) Impellor Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4" Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated 88 Currant Road / Fall River, MA 02720-4781 45 Dual Timer Reversing Rear Control Box Assembly Illus. No. 1 2 3 4 Part No. Qty. 322812 132198 150301 132431 1 1 2 1 132432 1 150103 151001 153002 152004 132430 2 2 1 1 1 132432 1 10 11 12 13 14 15 16 17 150103 151001 120701 150008 151000 121300 150300 --------- 2 2 1 2 2 3 2 - ----- 322809 150301 1 4 5 6 7 8 9 Telephone: (508) 678-9000 Description Back Electrical Box Component Plate Reversing Timer - 24 VAC (50/60 Hz) #8-18 x 7/16" Phillips Pan Head TEK Screw Reversing Contactor - 24 VAC (208/230/240v - 50/60 Hz) Reversing Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut Impellor Contactor - 24 VAC (208/230/240v - 50/60 Hz ) Impellor Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4" Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listing on page 53 and page 54) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated Fax: (508) 678-9447 46 American Dryer Corporation Steam Coil/Air Operated Steam Damper Assembly 88 Currant Road / Fall River, MA 02720-4781 Steam Coil/Air Operated Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 803416 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151006 152051 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 60 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1 Telephone: (508) 678-9000 47 Description Steam Coil Assembly 5/16" Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4" Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4" Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) 68-1/2" Long Steam Damper Foam Gasket 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 11/16" x 3" Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4" Lock Washer 1/4" Poly x 1 / 8" M.P.T. Connector 1/4" Poly-Flo Tubing (sold by the foot) 1/4" Poly x 1/ 8" M.P.T. Connector 1/8" Needle Valve 1/8" Brass Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1" Machine Bolt #6 Star Washer #6-32 Hex Nut Micro Valve Support 1/4-20 Hex Nut 1/4" Lock Washer 1/8" N.P.T. Silencer (muffler) Fax: (508) 678-9447 48 American Dryer Corporation Steam Coil/Mechanical Steam Damper Assembly 88 Currant Road / Fall River, MA 02720-4781 49 Steam Coil/Mechanical Steam Damper Assembly Illus. No. * Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 880780 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 115995 102350 309300 154300 153022 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 ---------* 60 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1 Description Steam Coil Assembly 5/16" Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4" Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7 through 10) Steam Damper Gasket (sold by the inch) 68-1/2" Long Steam Damper Foam Gasket Rod Bracket 1/2" x 3/32" Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4" Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2" x 3/32" Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4" Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8" Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8" Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8" Pan Head Machine Screw Mechanical Steam Damper Motor Cam The Mechanical Steam Damper Motor Cam is part of the Mechanical Steam Damper Motor. Telephone: (508) 678-9000 Fax: (508) 678-9447 50 Illus. No. Sail Switch/Hi-Limit Assembly Part No. Qty. 1 2 3 4 5 6 7 8 9 154004 150309 802799 150303 122200 105500 319202 154002 802800 802801 1 2 1 2 1 1 1 1 1 1 10 11 12 13 14 15 16 142809 150309 319704 151000 150001 130401 143000 1 2 1 2 2 1 1 American Dryer Corporation Description Twin Speed Nut #10-16 x 1/2" Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4" Pan Head "A" Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8" Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Assembly Complete (includes illus. nos. 1 through 8) 1/2" x 29-1/8" Pipe #10-16 x 1/2" Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2" Round Head Machine Screw 330° Hi-Limit ONLY 1/2" x 3/4" Reducing Coupling 88 Currant Road / Fall River, MA 02720-4781 Outer Top/Back Guard Assembly Illus. No. Part No. Qty. 1 2 3 322809 150301 330077 1 4 1 4 5 6 150301 150301 312510 7 10 1 7 8 9 314409 150301 103500 1 13 4 Telephone: (508) 678-9000 51 Description Back Electrical Box Cover #8-18 x 7/16" Phillips Pan Head TEK Screw Top Back Guard (No Top Back Guard on Steam Models) #8-18 x 7/16" Phillips Pan Head TEK Screw #8-18 x 7/16" Phillips Pan Head TEK Screw Outer Top (No Outer Top on Steam Models) Bottom Back Guard #8-18 x 7/16" Phillips Pan Head TEK Screw Leveling Leg Fax: (508) 678-9447 52 Coin Acceptor Listing NOTE: Coin Acceptors listed included Optical Switch (ADC Part No. 137056). Single Coin* ADC Part No. Nation Description 125100 125101 125114 125120 125124 125107 125130 125123 881604 125103 125121 125129 125132 125133 U.S. and Canada United Kingdom United Kingdom France France Australia Australia New Zealand Japan ------Singapore Hong Kong 25¢ Optic Coin Acceptor 10 New Pence Optic Coin Acceptor 20 New Pence Optic Coin Acceptor 2 French Franc Optic Coin Acceptor 5 French Franc Optic Coin Acceptor 20¢ Australian Optic Coin Acceptor $1 Australian Optic Coin Acceptor 50¢ New Zealand Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor .882 Token Optic Coin Acceptor .800 Token Optic Coin Acceptor Muller Token Optic Coin Acceptor 50¢ Singapore Optic Coin Acceptor $1 Hong Kong Optic Coin Acceptor Dual Coin* 881508 881842 881542 881846 125134 125126 * U.S. and Canada Canada United Kingdom France Denmark Netherlands 10¢/25¢ Hanke Dual Optic Coin Acceptor 25¢/$1 Hanke Dual Optic Coin Acceptor 1£/20 Pence Hanke Dual Optic Coin Acceptor 2/5 Franc Hanke Dual Optic Coin Acceptor 1/5 Danish Krone Dual Optic Coin Acceptor 25¢/1 Guilder Dual Optic Coin Acceptor Consult factory for Coin Acceptors not listed. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 53 Step Down Transformer Usage Listing for Gas/Steam Dryers HEAT Gas Steam VOLTAGE WIRE STEP D OWN TRANSFORMER CONTROL VOLTAGE SERVICE PART N O. PART N O. 208-240 3or 4 -------- 141403 380 3 132059 141403 380 4 132059 141403 416 3 132062 141403 416 4 132062 141403 460/480 3 132053 141403 460/480 4 132053 141403 575 3 132050 141403 NOTE: Information not listed was not available at time of printing contact factory. Telephone: (508) 678-9000 Fax: (508) 678-9447 54 Transformer Usage Listing for Electric Dryers WIRE STEP D OWN TRANSFORMER SERVICE PART N O. CONTROL VOLTAGE PART N O. KW VOLTAGE PHASE 48 208 3ø 3 or 4 -------- -------- 48 240 3ø 3 -------- -------- 48 380 3ø 3 or 4 -------- -------- 48 416 3ø 3 or 4 -------- -------- 48 460/480 3ø 3 or 4 -------- -------- 42 208 3ø 3 or 4 -------- -------- 42 240 3ø 3 -------- -------- 42 380 3ø 3 or 4 -------- -------- 42 416 3ø 3 or 4 -------- -------- 42 460/480 3ø 3 or 4 -------- -------- 40 208 3ø 3 or 4 -------- -------- 40 240 3ø 3 -------- -------- 40 380 3ø 3 or 4 132059 141403 40 416 3ø 3 or 4 132062 141403 40 460/480 3ø 3 or 4 132053 141403 36 208 3ø 3 or 4 -------- 132070 36 240 3ø 3 -------- 132070 36 380 3ø 3 or 4 132059 141403 36 416 3ø 3 or 4 132062 141403 36 460/480 3ø 3 or 4 132053 141403 30 208 3ø 3 or 4 -------- 132070 30 240 3ø 3 -------- 132070 30 380 3ø 3 or 4 132059 141403 30 416 3ø 3 or 4 132062 141403 30 480 3ø 3 132053 141403 NOTE: Information not listed was not available at time of printing contact factory. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 55 Electric Oven Component Application Chart W IR- KW VOLT P HASE 48 208 3ø 3 or 4 48 240 3ø 3 48 380 3ø 3 or 4 * E OVEN ASSY* TERM INAL L UG OVEN W IRE E LEM ENTS QTY. KW PART NO. 881624 6 8 120051 5 --- - - --- - --- - - --- - OVEN RELAY PART NO. QTY. PART NO. BUS B AR P/N 121011 CAT. NO. PART NO. #4 133300 6 121010 1 DPA63 131369 - --- - --- - --- --- - --- - --- - --- --- QTY. SIZE 48 416 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 48 460/480 3ø 3 or 4 825079 6 8 120052 4 #2 133302 6 121010 1 DFAJ 131361 44 400 3ø 4 881625 6 8 120052 5 #6 133200 4 121010 1 DPA63 131369 42 208 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 42 240 3ø 3 --- - - --- - - --- - --- - --- --- 42 380 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 42 416 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 42 460/480 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 40 208 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 40 240 3ø 3 --- - - --- - - --- - --- - --- --- 40 380 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 40 400 3ø 4 830331 6 6.6 120027 4 #6 133200 6 121010 1 DEAJ 131365 40 416 3ø 3 or 4 824922 6 6.6 120027 4 #6 133200 6 121010 1 DFAJ 131361 40 460/480 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 36 208 3ø 3 or 4 824921 6 6 120015 4 #2 133302 6 121010 1 GEAJ 131385 36 240 3ø 3 or 4 824920 6 6 120014 4 #4 133300 6 121012 1 FEAJ 131375 36 380 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 36 400 3ø 4 830209 6 6.6 120027 4 #6 133200 3 121010 1 DFAJ 131361 36 416 3ø 3 or 4 --- - - --- - - --- - --- - --- --- 36 480 3ø 3 or 4 824026 6 6 120014 4 #8 133100 5 121010 1 DPA43 131357 30 208 3ø 3 or 4 824917 6 5 120012 3 #4 133200 5 121012 1 FEAJ 131375 30 240 3ø 3 824934 6 5 120013 3 #4 133300 5 121012 1 FEAJ 131375 30 380 3ø 3 or 4 824976 6 5 120000 4 #8 133100 6 121010 2 DPA43 131357 30 416 3ø 3 or 4 824949 6 5 120012 4 #8 133100 6 121010 2 DPA43 131357 30 480 3ø 3 or 4 824955 6 5 120013 4 #8 133100 6 121010 2 BFAJ 131351 Oven Assemblies do not include Oven Relay (contactor). This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 wire or 4 wire service as well as if the dryer has microprocessor controls. NOTE: Information not listed was not available at time of printing contact factory. Telephone: (508) 678-9000 Fax: (508) 678-9447 56 Part Number 112027 112039 112280 112041 112534 112533 120100 120200 120300 120400 120500 120600 120800 120802 120902 120903 121006 121014 121026 121499 121500 121503 122804 404500 404502 404506 404507 880200 Additional Parts Available Description "Water Washed Fabrics" Label "Black / White / Green Ground" Label "Clean Lint Screen" Label "CAUTION - Exhaust/Lint Screen" Label "Phase 5 OPL Program Location Summary" Label "Phase 5 Coin Program Location Summary" Label 3/8" Straight BX Connector 3/8" x 90° BX Connector 3/8" x 45° BX Connector 3/8" Red Jacket BX Insulator 3/8" Jiffy Clip BX Retainer Clip 3/8" Greenfield BX 1/4" In-Line Connector Red Butt Connector #74B Wire Nut Crimp-on Wire Nut #10 Insulated Ring Terminal 1/4" Insulated (Female) Terminal Tab Receptacle Combination 4" Harness Tie 7" Harness Tie Harness Tie Mounting Clip Manometer (water column test gauge) Almond Brush-in-Cap Bottle Touch-Up Paint White Brush-in-Cap Bottle Touch-Up Paint Beige Brush-in-Cap Bottle Touch-Up Paint Cornflower Blue Brush-in-Cap Bottle Touch-Up Paint Electrical Terminal (assortment) Kit American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 ADC 450144 1 - 10/11/94-100 4 * 12/28/98-50 2 * 10/30/95-100 5 * 03/02/00-50 3 * 08/07/97-50 6 * 10/12/01-25