Download Quantum ATL StackLink User`s guide

Chapter 6 Running the Demonstration Programs
Running the Demo 6 Program
Running the Demo 6 Program
The Demo 6 program causes the X, Y, and Theta axes to move
randomly.
To run the Demo 6 program:
1 Access the Demo Programs screen (see Accessing the Demo
Programs Screen on page 97).
2 Press the Up or Down buttons to select Demo 6.
3 Press Select.
The Demo 6 program starts.
4 To stop the program, press Stop.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
5 Press Back to return to the Demo Programs screen.
104
ATL M-Series User’s Guide
6