Download Sharp 21H-S3P Specifications

Transcript
4 Replacement Procedures
4.23 Fluorescent Lamp
2. Turn the backlight unit face down and install a new lamp unit (R) on the P-chassis.
NOTE: When install the lamp unit (R), be careful not to bend or damage the reflection
sheet.
P-chassis
(R) Lamp unit
Figure 4-73 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (12)
Z
Z
Install the lamp unit without floating.
Install the reflection sheet as it is
placed inside the reflector.
Install the lead wire into this groove.
Cross-section drawing of Z-Z
Figure 4-74 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (13)
4-90
[CONFIDENTIAL]
Satellite A50S/TECRA A3X Maintenance Manual (960-534)