Download Contender - SMG - Security Systems, Inc.

Contender Series DVR User Manual
5.3 Event Setup (continued)
Highlight the ARROW icon in the EVENT INPUT menu to change the motion detection area for each camera, or
change details for certain cameras. The following EVENT SETUP – INPUT screen will appear.
Figure 29 – Event Setup - Input.
NOTE: Highlight and press the ARROW icon beside of the EVENT to access MOTION, VIDEO LOSS and
ALARM IN.
You can set up the motion event ON/OFF and sensitivity of each camera in the MOTION menu.
Highlight the MOTION beside of the EVENT and press the ENTER button to set up the alarm input.
The following ALARM IN screen will appear.
Figure 30 – Event Setup – Input – Alarm In.
You can select cameras that will be associated with the each alarm.
When the Record in EVENT OUTPUT menu is ON state, the video of associated camera will be recorded when
alarm input event is occurred.
6701 CLINTON ROAD • LOVES PARK, IL 61111 • 1-800-549-6393 (SUPPORT) • www.clintonelectronics.com
20