Download Virtual Integration Platform (VIP) Installation guide and user manual

VIP user manual
V 1.2.5
5.2.2 Derive networks
To create a network based on an available one, you could derive a network which will create a
new network with all nodes and dependencies of the available network.
To derive a network:
1. Select the network that will be based on from Network Management Dialog, and click
Derive Network button.
2. Input the new Network Name, select suitable Network Category, input proper
Description, and click Derive button.
3. The Network Editor window will pop up, with exactly the same available network.
However, this is a new network, and you could add or remove nodes and dependencies
as showed in Section 5.1.
5.2.3 Delete networks
To delete a network, select the network from Network Management Dialog, and click Delete
Network button. Click Yes if you want to delete the selected network.
Figure 5-25 Delete network
6 Create projects
Projects are defined from the VIP Client. After logging on to the Client, the user is presented
with the main user interface (that is initially blank) and subsequently has the facility to either
create a new project, or open an existing project from the database.
To create a new project, click either the Create new project button on the toolbar or the New
option in the File menu (see Figure 6-1). The new project dialog window will be opened as
illustrated within Figure 6-2.
Figure 6-1 Create new project
33