Download LDC-3908 Front Panel Controls
Transcript
CHAPTER 1 INTRODUCTION AND SPECIFICATIONS Maintenance the fuse drawer and replace the fuse(s) with the appropriate type. Use only the fuses indicated below. Table 1.1 LDC-3908 Fuse Replacement Line Voltage Fuse Replacement 120 VAC 10 Amp, 3AB, 250V Slow Blo 220 - 240 VAC 5 Amp, 3AG, 250V Slow Blo Disconnect power when replacing fuses. Make certain you install the correct fuse for your line voltage. If you install the incorrect fuse, damage to the LDC-3908 and possible personal injury may occur. Table 1.2 General LDC-3908 Specifications Specification Description Connectors External Modulation Connector BNC, instrumentation amplifier input RS-232 Interface Input Output GPIB Interface 9-pin, D-connector, female 9-pin, D-connector, male (INACTIVE) Meets ANSI/IEEE Std 488.1-1987 Meets ANSI/IEEE Std 488.2-1987 General 6 LDC-3908 Size (H x W x D) 5.25" x 18.98" x 15.3" (133mm x 482mm x 389mm) Weight (with 8 modules) 52.0 lbs (23.6 kg), approx. Power Requirements 50 - 60 Hz; selectable voltage 110 - 130 VAC / 210 - 240 VAC Temperature 0 to +40 C operating; -40 to +70 C storage Humidity 20% to 85% relative humidity, non-condensing. Display type Vacuum Fluorescent Display (VFD)