Download LDC-3908 Front Panel Controls

Transcript
CHAPTER
1
INTRODUCTION AND SPECIFICATIONS
Maintenance
the fuse drawer and replace the fuse(s) with the appropriate type. Use only the fuses indicated
below.
Table 1.1 LDC-3908 Fuse Replacement
Line Voltage
Fuse Replacement
120 VAC
10 Amp, 3AB, 250V Slow Blo
220 - 240 VAC
5 Amp, 3AG, 250V Slow Blo
Disconnect power when replacing fuses. Make certain you install the correct fuse for
your line voltage. If you install the incorrect fuse, damage to the LDC-3908 and possible
personal injury may occur.
Table 1.2 General LDC-3908 Specifications
Specification
Description
Connectors
External Modulation Connector
BNC, instrumentation amplifier input
RS-232 Interface
Input
Output
GPIB Interface
9-pin, D-connector, female
9-pin, D-connector, male (INACTIVE)
Meets ANSI/IEEE Std 488.1-1987
Meets ANSI/IEEE Std 488.2-1987
General
6

LDC-3908
Size (H x W x D)
5.25" x 18.98" x 15.3" (133mm x 482mm x 389mm)
Weight (with 8 modules)
52.0 lbs (23.6 kg), approx.
Power Requirements
50 - 60 Hz; selectable voltage
110 - 130 VAC / 210 - 240 VAC
Temperature
0 to +40 C operating; -40 to +70 C storage
Humidity
20% to 85% relative humidity, non-condensing.
Display type
Vacuum Fluorescent Display (VFD)