Download Model DSP6001 User`s Manual

Chapter 8 – Optional Equipment
Magtrol Model DSP7000 Dynamometer Controller
10.Go to the Start Menu on your PC desktop. Launch the Tera Term Application.
Figure 8–28 Tera Term Window
11.Go to the Setup menu. Click on Terminal. Configure the selections as follows, and then close
this screen.
Figure 8–29 Terminal Setup Window
104
operation
12. Return to the Setup menu. Click on Serial Port. Configure the selections as follows, and then
close this screen. Please note that the baud rate setting should be the same as the DSP7000
setting.