1
Download GS1280 Installation Guide
Transcript
2.4.11 Set Drawer IDs Each component must have a unique ID and should follow these guidelines. • • • 34 Where possible, drawer IDs, both processor and I/O, should follow a pattern set by their position in the cabinet – 0 being the bottom position and 7 being the top position. Processor drawers should be below I/O drawers and can have a value from 0 to 3. I/O drawers are placed above processor drawers and can have values from 0 to F (hex). (the push-wheel on the left must be 0)
