Download M5272C3 User`s Manual

Commands
IRD
Internal Register Display
Usage:
IRD <module.register>
This command displays the internal registers of different modules inside the MCF5272. In
the command line, module refers to the module name where the register is located and
register refers to the specific register to display.
The registers are organized according to the module to which they belong. The available
modules on the MCF5272 are CS, DMA0, DMA1, DMA2, DMA3, DRAMC, PP, MBUS,
SIM, TIMER1, TIMER2, UART0 and UART1. Refer to the MCF5272 user’s manual for
more information on these modules and the registers they contain.
Example:
ird
2-20
sim.rsr
M5272C3 User’s Manual
PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE