Download VCS Domestic - De Anza College

Ford Data Parameters
Antilock Brake Parameters
ABSLF I
ABSLF O
ABSLR I
ABSLR O
ABSRF I
ABSRF O
ABSRR I
ABSRR O
Range: __________________________________________________________ ON/OFF
Displays the state of the PCM commands to the ABS inlet (I) and outlet (O) valves.
•
•
•
•
LF = left front
LR = left rear
RF = right front
RR = right rear
ABSR I
ABSR O
Range: __________________________________________________________ ON/OFF
Displays the PCM commanded status to the rear ABS inlet (I) or outlet (O) valves. This
parameter is only used on 4WABS with a rear differential speed sensor instead of a sensor at
both rear wheels. In an ABS stop this system controls both rear wheels at the same time.
ABSPMPRLY
Range: __________________________________________________________ ON/OFF
Displays the ABS pump motor relay state.
ABSVLVRLY
Range: __________________________________________________________ ON/OFF
Displays the status of the ABS valve control relay.
ACCR_TEMP (°C/°F)
Range: ____________________________________________________________ actual
Displays the brake accumulator temperature.
ACCR_TRAV
Range: __________________________________________________________ ON/OFF
Displays the brake accumulator travel signal.
ACU_CHK
Range: ______________________________________________________ not available
Displays the ACU Bleed Check status.
ARCFault
Range: __________________________________________________________ YES/NO
Indicates whether an automatic ride control DTC has set.
AutoRideCtrl
Range: __________________________________________________________ ON/OFF
Displays the PCM command status to the automatic ride control system.
AWD_MSG_ABS_MZ
AWD_MSG
Range: ___________________________________________ PRESENT/NOT PRESENT
Indicates whether there is CAN communication with the 4x4 module.
412