Download HEC-100x Harsh Environment Controller

Transcript
HEC-100x Features
Figure 2.11 - Typical PWM Output Connections``
Analog Inputs
The HEC-100x provides 2 on-board, 10-bit resolution analog inputs. Each analog input will accept an input of -20mADC. Each analog input is represented in the EZ LADDER Toolkit ladder diagram using variables labeled AN0 and AN1 respectively. Both variable
were created automatically when the HEC-1000 target was selected in the Project Settings Window.
Each variable (AN0 and AN1) will represent the actual current reading on the input (0-20mADC) as an integer number (0-1023). To
use the analog input reading, place the appropriate analog input variable as an input to function blocks.
Figure 2.12 shows the typical connections for using the analog inputs.
HEC-100X User’s Manual
Document #: 2006008.7.pdf
Divelbiss Corporation • 9778 Mt. Gilead Road • Fredericktown, Ohio 43019 • 1-800-245-2327 • www.divelbiss.com
PAGE 16 of 19