Download IC-PCR1000

<<Note>>
- SEL and SKIP are set in the memory channel list.
- At least 2 memory channels must be programmed
with the desired condition for scan to proceed.
- Memory channels can be set with all the optional
functions.
Changing the scan direction during
scanning
To change the scan in the direction of higher
frequencies, right-click on the [Main Dial]; to change
the scan in the direction of lower frequencies, left-click
on the [Main Dial].
In the case of memory scans, scan changes in the
direction of higher channel numbers and lower
channel numbers, respectively.
Temporarily muting receive audio
1) Click the [COMPO] button to display the
component receiver screen.
2) Each click of the [MUTE] button toggles the mute
function on and off.
When the function is on receive audio is muted.
<<Note>>
- The mute function has priority over the monitor
function.
- Be careful that you don't leave the mute function on
when not wanted as no receive audio is emitted
even when receiving signals.
- While monitoring the band scope in SSB and CW
modes, receive audio is muted. Push the [STOP]
button ([ ] when using the communications
32