Download TrapPro User Manual

TrapMate (TrapPro) User Guide
The Default CMYK Ink Set supplied in the RIP contains standard settings for cyan, magenta, yellow, and black
inks, as shown in the Edit Ink Sets dialog (Figure 3.5).
Figure 3.5 Edit Ink Sets window
When adding a new ink set, or amending an existing one, ensure that all inks used in a job that have a specific
trapping requirement, such as opaque, transparent or ignore, are included in your ink set. Otherwise, any inks
not included will be trapped as “normal” ink with 1.0 density.
AG45130 REV. 7
18