Download Issue 2 - Dialogic

Dialogic® DSI Protocol Stacks SNMP User Manual Issue 2
Inform notifications:
To enable inform notifications (acknowledged traps), use the following
command:
informsink <host>[:<port>] [<community>]
Additional Traps:
To enable traps on authentication failures, use the following command:
authtrapenable <1|2>
Where:
1 – enabled
2 – disabled (default)
User Defined Information
This optional configuration section defines SNMP information without the use
of a Sub-Agent. This allows the user to manually define system information
and to specify other optional monitoring information.
System Information:
The following commands can be added to snmpd.conf to provide string-based
system information:
sysLocation
sysContact
sysName
sysServices
sysDescr
sysObjectID
3.2.4
<string>
<string>
<string>
<string>
<string>
<string>
Example Net-SNMP Configuration (snmpd.conf)
SNMPv2c Example
#########################################
# snmpd.conf – Example Configuration (SNMPv2c)
#########################################
# Access Control – Allow all networks/all OID read access
# A SNMPv1/SNMPv2c read-only access name
# rocommunity <community> [<network> <oid>]
rocommunity public
# Agent Behavior – Run as master agent
# master [yes|no]
master yes
# AgentX Sub-Agent Connection – DSA connectivity: tcp port 705
# agenxSocket <type>:<host>:<port>
agentxSocket tcp:localhost:705
# Traps – Sends v1 traps to two managers
# trapsink <host>:<port> <community>
trapsink 192.168.0.10:162 public
trapsink 192.168.0.11:162 public
#########################################
21