Download User Manual - Stemmer Imaging

Transcript
VA Series
6.2
Precaution to center the image sensor

User does not need to center the image sensor as it is adjusted as factory default settings.

When you need to adjust the center of image sensor, please contact your local dealer or the manufacturer
for technical assistance.
6.3
Precaution about blurring compared to center

User does not need to adjust the tilt as it is adjusted as factory default settings.

If the tilt settings need to be adjusted inevitably, please contact your local dealer or factory representative for
technical support.
6.4
Installing the Configurator

You can control the camera by executing the Configurator.exe file.

You can download the latest Configurator at machinevision.vieworks.com.

Please refer to your Camera Link frame grabber user manual.
21 of 80
RA14-11A-012