Download `CAVLAR` manual

4.3
Status report
During the calculation, the status of each calculation process is presented in the ‘Calculation status’
dialog box (see Figure 8).
Figure 8 Status of process in the calculation of the critical valves.
4.4
Results: critical valves
4.4.1 Determining the critical valves
The results of a calculation series for valves are shown in the ‘Output’ tab (right-hand side) as in Figure
9. Generally, the ‘CML’ is the criterion used in selecting the ‘critical valves’. The valves that contribute
most to the total ‘CML’ are qualified as critical.
User manual 'CAVLAR'
© KWR
- 17 -
BTO 2009.003 EN
December 2012