Download Usermanual

3
Safety guidelines
Please observe the safety guidelines indicated in the ATEX installation manual of
the ExCam series!
4
Illustration of the model key
The following model options are currently available for the ExCam vario:
Product name
ExCam vario
Model option
ATEX
Type
housing
(1)
option
Explosion
(2)
group
Meter
(3)
SKA02
Cable
(4)
termin.
Temp.
5)
range
T03T03T03T03T03T03T03T03-
VAVAVAVAALALALAL-
BBCCBBCC-
005005005005005005005005-
KPKPKPKP-
L
L
L
L
L
L
L
L
*all model options are available in stainless steel and aluminum housing with K1 or K2 supply flange (q.v. chapter 10 – technical
drawings)
(1)
VA = Execution in stainless steel
AL = Execution in aluminum die cast
(2)
B = Explosion group IIB (standard - all gases except hydrogen, acetylene, carbon disulphide)
C = E Explosion group IIC (all gases)
(3)
Length of the connection line in meter (001 - 200)
(5 meter is the standard length)
(4)
K = Terminal block connection (standard)
All signaling lines are spliced to single strands and furnished with wire-end ferrules to allow
connecting the camera to a terminal block
P = Plug- termination
Approximately 30cm of the system cable’s outer stealth is stripped.
The power supply strands (RD, BK) are furnished with wire-end ferrules.
The AWG24 cable is furnished with a BNC connector
(5)
L = Low temperature (-20° C to 50° C)
Doc.-ID: 131012-PT03BA-RT-ExCam vario_en_rev.02, page 8 of 24