Download User Manual

4.2.3 Connecting the Measurement Receiver ESPI and the Spectrum Analysers
FSP and FSU
The measurement receiver / the spectrum analysers are controlled via the GPIB Bus. An adequate
interface card (PCI-GPIB for a desktop PC or PCMCIA-GPIB for a notebook) is required.. More
detailed information can be found in the RFEX Software manual.
4.2.4 Connecting the Sync-Box TS95SYN (UMTS Option)
The use of the option CPICH decoding is enabled via the hardlock. For the time being, the option can
only be used with measurement receiver ESPI or the spectrum analyzers FSP or FSU. For the
decoding the Sync-Box TS95SYN (R&S Id. Nr. 1114.4817.02) has to be connected to the rear of the
ESPI / FSP / FSU as follows:
Input / Output TS95SYN
Rear Connector ESPI, FSP, FSU
10 MHz IN
REF OUT
PULS OUT
EXT TRIG / GATE IN
DC IN
MOUSE
Table: Connection of Sync-Box to measurement receiver / spectrum analyser
1158.9295.02
11
D-1