Download Bluelight BL-3G User Manual

o
o
o
o
Rate targets are all set to 0, meaning the critical time mode is disabled. (NZ will
appear, meaning Non Zero, if target rates are set up in the Rate targets section of the
Advanced 2 tab page).
The BL-3G gyro will output signals with minimum 1.1ms and maximum 1.94 ms pulse
widths, with a frequency of 15ms.
The software version number is available when the "Click when connected" text is
clicked.
If no input signals are supplied the inputs will default to the mid range value.
Note: Input1 - ΔX simply shows that the gyro correction to pitch will take place in the opposite direction
to the pitch motion caused by some external disturbance.
IMPORTANT NOTICE:
The information tab page is a good indication how the system should be
connected according to the settings selected in the BL-3G set up tool,
however:
THE PERFORMANCE OF THE AIRCRAFT SHOULD BE TESTED ON
THE GROUND PRIOR TO ANY FLIGHT.
Checks should also be made that the gyro function is the correct
way round for any disturbances and that any flap functions operate
the correct way round too.
Bluelight Technologies Co. Ltd. | BL-3GRC, 3 axis gyro User Manual V2.4
47 of 71