Download User Manual

USB3.0/eSATA/1394b-to-SATA II RAID Subsystem
IMPORTANT: When hard disks are inserted in the disk slots, the
first inserted hard disk is assigned “Port 0”. Port 0 is the (in-band)
channel that will be used by mini-EPICa AP to manage the RAID
controller. Other hard disks will be assigned Port1, Port 2, etc. If
the first hard disk assigned as Port 0 is removed, the AP cannot
access and manage the RAID controller. When a RAID Set is
already created, the first hard disk that was inserted and assigned
Port 0 (whether or not it is part of the RAID Set) can then be
removed and the AP can still manage the RAID controller.
User Manual
21