1
Download Abaqus Analysis User`s Manual, vol3
Transcript
CONTENTS Volume II PART III 6. ANALYSIS PROCEDURES, SOLUTION, AND CONTROL Analysis Procedures Introduction Procedures: overview General and linear perturbation procedures Multiple load case analysis Direct linear equation solver Iterative linear equation solver 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 Static stress/displacement analysis Static stress analysis procedures: overview Static stress analysis Eigenvalue buckling prediction Unstable collapse and postbuckling analysis Quasi-static analysis Direct cyclic analysis Low-cycle fatigue analysis using the direct cyclic approach 6.2.1 6.2.2 6.2.3 6.2.4 6.2.5 6.2.6 6.2.7 Dynamic stress/displacement analysis Dynamic analysis procedures: overview Implicit dynamic analysis using direct integration Explicit dynamic analysis Direct-solution steady-state dynamic analysis Natural frequency extraction Complex eigenvalue extraction Transient modal dynamic analysis Mode-based steady-state dynamic analysis Subspace-based steady-state dynamic analysis Response spectrum analysis Random response analysis 6.3.1 6.3.2 6.3.3 6.3.4 6.3.5 6.3.6 6.3.7 6.3.8 6.3.9 6.3.10 6.3.11 Steady-state transport analysis Steady-state transport analysis 6.4.1 Heat transfer and thermal-stress analysis Heat transfer analysis procedures: overview Uncoupled heat transfer analysis Sequentially coupled thermal-stress analysis 6.5.1 6.5.2 6.5.3 ix Abaqus ID:usb-toc Printed on: Thu September 2 -- 16:47:36 2010
