Download User Manual Defibrillator MonitorE-HEART

Defibrillator Monitor E-HEART
16.1.12 OTHER FUNCTIONS
Besides the accessible items on the Configuration Menu, there are other accessible
functions on the E-HEART BIPHASIC DEFIBRILLATOR MONITOR panel:
16.1.12.1
PACEMAKER (OPTIONAL)
A) Turns on / off – Enables or disables the pacemaker;
B) MODE (Sync, or Assync.) – Changes between the VOO and VVI modes;
C) Inhibits beep – Enables or disables the synchronized beep with the pacemaker
pulses;
D) Inhibits pulse– Enables or disables the pacemaker pulses deflagration;
E) EMERGENCY – Changes the pacemaker configuration for the ones from the
Emergency Mode (VOO, 70 rpm, 150 mA, 40 ms).
16.1.12.2
PRINTER (OPTIONAL)
When the key is pressed for the first time the ECG printing gets started, when it is
pressed again, the procedure is interrupted.
16.1.12.3
NIBP (OPTIONAL)
When the key is pressed for the first time the Arterial Pressure scouting gets started,
when it is pressed again, the procedure is interrupted.
16.1.12.4
SYNC. ON
Enables or disables the electric discharge with the peak of the R wave. When the
equipment is turned on, the synchronism is off, when activated, a “Sync, ON” message
will appear on the display (right below the heart frequency indication) and its led will
appear on.
16.1.12.5
CANCEL LOAD
This key should be activated when the deflagration of the electric discharge is no longer
desired, in order to discharge the capacitor.
16.1.12.6
2 MIN
It inhibits the sound alarms for 2 minutes.
16.1.12.7
SELECTION / MENU
It allows adjusting the load level that is going to be used in the next trigger.
15