Download 1.4 Extension Port Assignment - Syd-Com
Transcript
1.6 E1 Port Assignment Parameter Card No. Default — Value Range XXX : E1 [ XXX : Card No. (101-314)] Description/Function Specifies the physical number of the E1 digital trunk card which you are going to programme. Reference • 1.2 Parameter Channel Type Default Undefined Value Range 1. 2. 3. 4. Description/Function Specifies the type of E1 interface per channel. 1. 2. 3. 4. Slot Assignment (P/G) Undefined DR2 E&M-P E&M-C Undefined: Not assigned. DR2: Digital signalling system-R2 E&M-P: Pulsed E&M E&M-C: Continuous E&M Reference • 1.3 System Features (F/G) – E1 Carrier Parameter Group No. Default Blank Value Range 1-48 Description/Function Specifies the Trunk Group (1-48) to which the E1 port is assigned. Reference • 1.3 System Features (F/G) – Trunk Group • 3.2 Trunk Group (P/G) Configuration 23