Download DRI

Parameter Settings
The DRI will default to certain parameters when power is turned OFF and ON. To access the parameter settings:
1. Press the PEAK button while holding down the ON button; the small display will indicate “dSP”.
2. Each time the PEAK button is pressed, the DRI will scroll through each of the parameters.
3. Press the RESET button to exit.
See the chart below for the location of descriptions of the options within each parameter.
DESCRIPTION
Display Update Time
(see page 6)
DISPLAY
OPTIONS
(in seconds)
0.125, 0.25, 0.5, 1, 2
Measuring Mode
(see page 5)
on, oFF
Auto Power Off
(see page 18)
nonE, 3
Measurement Units
(see page 5)
English, Metric, or Newton
Load Cells: Lb(oz), Kg(g), N
Torque: LbI(oZI), KgC(gC), NCM
nonE, dG, 232C
Output Type
(see page 9-13)
External Control Input
(see page 14-15)
nonE, tArE, HoLd
Memory Mode
(see page 7)
nonE, SinG, Cont
Update time for
Analog Output
(see page 13)
on(1ms), oFF(display update time)
Filter
(see page 8)
0, 1, 2
17