Download MA6440 - Kollmorgen

Pacific Scientific
cable
Pacific Scientific makes cables that connect directly from J3 to
our system motors. To order the cable from Pacific Scientific,
use the order number SPC-xxx-6410, where “xxx” is the length,
in feet (one-foot increments) up to 50 feet. For example,
SPC-050 is a 50 feet long cable.
Pacific Scientific makes cables for both E and H series stepper
motors (SPC-xxx-6410) and K and N series stepper motors
(SPC-xxx-6410-KN). Please refer to the correct diagram on the
following page.
Pacific Scientific
cabling diagram
If you are using Pacific Scientific E and H series motor cable,
with the mating connectors already attached, install as follows:
1
5
J3
A
A
B
B
CASE GND
MOTOR
PHASES
BLK
1
2
3
4
5
5 Pin PCD
6440
2 - 14
JACKET
ORG
RED
YEL
GRN
SPC - XXX - 6410
MA6440
A
B
C
D
E
5 Pin MS Connector
MOTOR
6440 User Manual - Rev 2